component
DRV8824PWPR
Public Made by Adomby adom
Texas Instruments Stepper Motor Driver, HTSSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+66@@ -0,0 +1,66 @@+# DRV8824PWPR++**Texas Instruments** · Stepper Motor Driver · HTSSOP-28++DRV8824PWPR from Texas Instruments, in a HTSSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CP1 | bidirectional | Charge pump flying capacitor; connect 0.01-µF 50-V capacitor between CP1 and CP2. |+| 2 | CP2 | bidirectional | Charge pump flying capacitor; connect 0.01-µF 50-V capacitor between CP1 and CP2. |+| 3 | VCP | bidirectional | High-side gate drive voltage; connect 0.1-µF 16-V ceramic capacitor. |+| 4 | VMA | power_in | Bridge A motor power supply (8.2 to 45 V); bypass with 0.1-µF capacitor and bulk capacitance. |+| 5 | AOUT1 | output | Bridge A motor output 1; connect to stepper motor winding A. |+| 6 | ISENA | bidirectional | Bridge A current sense node; connect current sense resistor to measure winding A current. |+| 7 | AOUT2 | output | Bridge A motor output 2; positive current flows AOUT1 to AOUT2. |+| 8 | BOUT2 | output | Bridge B motor output 2; positive current flows BOUT1 to BOUT2. |+| 9 | ISENB | bidirectional | Bridge B current sense node; connect current sense resistor to measure winding B current. |+| 10 | BOUT1 | output | Bridge B motor output 1; connect to stepper motor winding B. |+| 11 | VMB | power_in | Bridge B motor power supply (8.2 to 45 V); bypass with 0.1-µF capacitor and bulk capacitance. |+| 12 | AVREF | input | Bridge A current set reference input (1 to 3.5 V); voltage source sets winding A current magnitude. |+| 13 | BVREF | input | Bridge B current set reference input (1 to 3.5 V); voltage source sets winding B current magnitude. |+| 14 | GND | power_in | Device ground; connect to system ground plane. |+| 15 | V3P3OUT | power_out | 3.3-V internal regulator output (3.18 to 3.42 V at 25°C); bypass with 0.47-µF capacitor. |+| 16 | nRESET | input | Active-low reset input; initializes step indexer and disables H-bridge driver outputs. |+| 17 | nSLEEP | input | Sleep mode control input; low enables sleep mode, high enables normal operation. |+| 18 | nFAULT | output | Open-drain active-low fault output; driven low for overtemperature or overcurrent faults. |+| 19 | DECAY | input | Decay mode selector input; low = slow decay, open = mixed decay, high = fast decay. |+| 20 | DIR | input | Direction input; determines motor step direction (forward or reverse). |+| 21 | nENBL | input | Active-low enable input; disables outputs and ignores STEP when driven high. |+| 22 | STEP | input | Step input; rising edge advances indexer one step in current mode. |+| 23 | NC | unconnected | No connect; leave this pin unconnected. |+| 24 | MODE0 | input | Microstep mode input 0; MODE0-2 select full, 1/2, 1/4, 1/8, 1/16, or 1/32 steps. |+| 25 | MODE1 | input | Microstep mode input 1; MODE0-2 select full, 1/2, 1/4, 1/8, 1/16, or 1/32 steps. |+| 26 | MODE2 | input | Microstep mode input 2; MODE0-2 select full, 1/2, 1/4, 1/8, 1/16, or 1/32 steps. |+| 27 | nHOME | output | Open-drain active-low home status output; driven low when indexer at home position. |+| 28 | GND | power_in | Device ground; connect to system ground plane. |+| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-28 |+| Category | Motor Driver ICs |+| Pins | 29 |++## CAD (KiCad official)++- Symbol: `DRV8824PWPR`+- Footprint: `Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm`+- 3D model: HTSSOP-28 (KiCad packages3D, STEP)+- 3D model files: `drv8824pwpr-etched.step` / `drv8824pwpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `drv8824pwpr.step` / `drv8824pwpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/drv8824) (38 pp, sha256 `9e017d4c2fe860a9`, retrieved 2026-09-21, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/drv8824pwpr-datasheet.pdf)
page.jsonadded+269@@ -0,0 +1,269 @@+{+ "slug": "drv8824pwpr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Stepper Motor Driver, HTSSOP-28. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "motor driver ics",+ "drv8824pwpr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "drv8824pwpr.kicad_sym",+ "drv8824pwpr.kicad_mod",+ "drv8824pwpr.glb",+ "drv8824pwpr.step",+ "drv8824pwpr.lbr",+ "docs/hero.png",+ "docs/drv8824pwpr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "DRV8824PWPR",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-28",+ "pin_count": 29,+ "category": "Motor Driver ICs",+ "subcategory": "Stepper Motor Driver",+ "datasheet": "https://www.ti.com/cn/lit/gpn/drv8824",+ "parts": {+ "symbol": "drv8824pwpr.kicad_sym",+ "footprint": "drv8824pwpr.kicad_mod",+ "model_3d": "drv8824pwpr-etched.glb",+ "model_3d_plain": "drv8824pwpr.glb",+ "model_3d_step": "drv8824pwpr-etched.step",+ "model_3d_step_plain": "drv8824pwpr.step",+ "lbr": "drv8824pwpr.lbr"+ },+ "distributor_links": {+ "lcsc": "C86252"+ },+ "pins": [+ {+ "number": "1",+ "name": "CP1",+ "type": "bidirectional",+ "description": "Charge pump flying capacitor; connect 0.01-µF 50-V capacitor between CP1 and CP2."+ },+ {+ "number": "2",+ "name": "CP2",+ "type": "bidirectional",+ "description": "Charge pump flying capacitor; connect 0.01-µF 50-V capacitor between CP1 and CP2."+ },+ {+ "number": "3",+ "name": "VCP",+ "type": "bidirectional",+ "description": "High-side gate drive voltage; connect 0.1-µF 16-V ceramic capacitor."+ },+ {+ "number": "4",+ "name": "VMA",+ "type": "power_in",+ "description": "Bridge A motor power supply (8.2 to 45 V); bypass with 0.1-µF capacitor and bulk capacitance."+ },+ {+ "number": "5",+ "name": "AOUT1",+ "type": "output",+ "description": "Bridge A motor output 1; connect to stepper motor winding A."+ },+ {+ "number": "6",+ "name": "ISENA",+ "type": "bidirectional",+ "description": "Bridge A current sense node; connect current sense resistor to measure winding A current."+ },+ {+ "number": "7",+ "name": "AOUT2",+ "type": "output",+ "description": "Bridge A motor output 2; positive current flows AOUT1 to AOUT2."+ },+ {+ "number": "8",+ "name": "BOUT2",+ "type": "output",+ "description": "Bridge B motor output 2; positive current flows BOUT1 to BOUT2."+ },+ {+ "number": "9",+ "name": "ISENB",+ "type": "bidirectional",+ "description": "Bridge B current sense node; connect current sense resistor to measure winding B current."+ },+ {+ "number": "10",+ "name": "BOUT1",+ "type": "output",+ "description": "Bridge B motor output 1; connect to stepper motor winding B."+ },+ {+ "number": "11",+ "name": "VMB",+ "type": "power_in",+ "description": "Bridge B motor power supply (8.2 to 45 V); bypass with 0.1-µF capacitor and bulk capacitance."+ },+ {+ "number": "12",+ "name": "AVREF",+ "type": "input",+ "description": "Bridge A current set reference input (1 to 3.5 V); voltage source sets winding A current magnitude."+ },+ {+ "number": "13",+ "name": "BVREF",+ "type": "input",+ "description": "Bridge B current set reference input (1 to 3.5 V); voltage source sets winding B current magnitude."+ },+ {+ "number": "14",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground; connect to system ground plane."+ },+ {+ "number": "15",+ "name": "V3P3OUT",+ "type": "power_out",+ "description": "3.3-V internal regulator output (3.18 to 3.42 V at 25°C); bypass with 0.47-µF capacitor."+ },+ {+ "number": "16",+ "name": "nRESET",+ "type": "input",+ "description": "Active-low reset input; initializes step indexer and disables H-bridge driver outputs."+ },+ {+ "number": "17",+ "name": "nSLEEP",+ "type": "input",+ "description": "Sleep mode control input; low enables sleep mode, high enables normal operation."+ },+ {+ "number": "18",+ "name": "nFAULT",+ "type": "output",+ "description": "Open-drain active-low fault output; driven low for overtemperature or overcurrent faults."+ },+ {+ "number": "19",+ "name": "DECAY",+ "type": "input",+ "description": "Decay mode selector input; low = slow decay, open = mixed decay, high = fast decay."+ },+ {+ "number": "20",+ "name": "DIR",+ "type": "input",+ "description": "Direction input; determines motor step direction (forward or reverse)."+ },+ {+ "number": "21",+ "name": "nENBL",+ "type": "input",+ "description": "Active-low enable input; disables outputs and ignores STEP when driven high."+ },+ {+ "number": "22",+ "name": "STEP",+ "type": "input",+ "description": "Step input; rising edge advances indexer one step in current mode."+ },+ {+ "number": "23",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; leave this pin unconnected."+ },+ {+ "number": "24",+ "name": "MODE0",+ "type": "input",+ "description": "Microstep mode input 0; MODE0-2 select full, 1/2, 1/4, 1/8, 1/16, or 1/32 steps."+ },+ {+ "number": "25",+ "name": "MODE1",+ "type": "input",+ "description": "Microstep mode input 1; MODE0-2 select full, 1/2, 1/4, 1/8, 1/16, or 1/32 steps."+ },+ {+ "number": "26",+ "name": "MODE2",+ "type": "input",+ "description": "Microstep mode input 2; MODE0-2 select full, 1/2, 1/4, 1/8, 1/16, or 1/32 steps."+ },+ {+ "number": "27",+ "name": "nHOME",+ "type": "output",+ "description": "Open-drain active-low home status output; driven low when indexer at home position."+ },+ {+ "number": "28",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground; connect to system ground plane."+ },+ {+ "number": "29",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 29 added from the footprint"+ ],+ "pages_sent": 38,+ "cost_usd": 0.4248,+ "at": "2026-09-21T21:32:50"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/drv8824",+ "pages": 38,+ "sha256": "9e017d4c2fe860a9",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 29,+ "described": 29,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}