component
DRV8424PWPR
Public Made by Adomby adom
Texas Instruments Stepper Motor Driver, HTSSOP-28-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+66@@ -0,0 +1,66 @@+# DRV8424PWPR++**Texas Instruments** · Stepper Motor Driver · HTSSOP-28-EP++DRV8424PWPR from Texas Instruments, in a HTSSOP-28-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCP | passive | Charge pump output; connect 0.22µF 16V ceramic capacitor to VM. |+| 2 | VM | power_in | Motor power supply input, 4.5 to 33V operating range; bypass with two 0.01µF and one bulk ceramic capacitor to PGND. |+| 3 | PGND | power_in | Power ground; connect to system ground. |+| 4 | AOUT1 | output | Motor winding A output, up to 4A peak current; connect to stepper motor winding. |+| 5 | AOUT1 | output | Motor winding A output, up to 4A peak current; connect to stepper motor winding. |+| 6 | AOUT2 | output | Motor winding A output, up to 4A peak current; connect to stepper motor winding. |+| 7 | AOUT2 | output | Motor winding A output, up to 4A peak current; connect to stepper motor winding. |+| 8 | BOUT2 | output | Motor winding B output, up to 4A peak current; connect to stepper motor winding. |+| 9 | BOUT2 | output | Motor winding B output, up to 4A peak current; connect to stepper motor winding. |+| 10 | BOUT1 | output | Motor winding B output, up to 4A peak current; connect to stepper motor winding. |+| 11 | BOUT1 | output | Motor winding B output, up to 4A peak current; connect to stepper motor winding. |+| 12 | PGND | power_in | Power ground; connect to system ground. |+| 13 | VM | power_in | Motor power supply input, 4.5 to 33V operating range; bypass with two 0.01µF and one bulk ceramic capacitor to PGND. |+| 14 | GND | power_in | Device logic ground; connect to system ground. |+| 15 | DVDD | power_out | Internal regulated 5V logic supply output, maximum 2mA load; bypass with 0.47-1µF capacitor to GND. |+| 16 | nFAULT | tri_state | Fault indicator open-drain output, pulled low on fault condition; requires external pull-up resistor. |+| 17 | VREF | power_in | Current reference input, 0.05 to 3.3V (DRV8424); sets full-scale motor current by ITRIP = VREF/1.32. |+| 18 | M0 | input | Microstepping mode select input with internal pull-down; configure with M1 for step mode 1/1 to 1/256. |+| 19 | TOFF | input | PWM off-time four-level input; selects 7µs, 16µs, 24µs, or 32µs chopping time. |+| 20 | DECAY1 | input | Decay mode select input; configure with DECAY0 for slow, mixed, or smart decay modes. |+| 21 | DECAY0 | input | Decay mode select input; configure with DECAY1 for slow, mixed, or smart decay modes. |+| 22 | M1 | input | Microstepping mode select input with internal pull-down; configure with M0 for step mode 1/1 to 1/256. |+| 23 | STEP | input | Step pulse input, rising edge advances stepper one microstep; accepts up to 500kHz with internal pull-down. |+| 24 | DIR | input | Direction control input; logic level selects forward or reverse motor rotation with internal pull-down. |+| 25 | ENABLE | input | Device enable control input; logic low disables outputs, logic high enables, with internal pull-up to DVDD. |+| 26 | nSLEEP | input | Sleep mode control input; logic high enables device, logic low enters 2µA sleep mode with internal pull-down. |+| 27 | CPL | passive | Charge pump switching node low side; connect 0.022µF ceramic capacitor to CPH. |+| 28 | CPH | passive | Charge pump switching node high side; connect 0.022µF ceramic capacitor to CPL. |+| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-28-EP |+| Category | Motor Driver ICs |+| Pins | 29 |++## CAD (KiCad official)++- Symbol: `DRV8424PWPR`+- Footprint: `Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm`+- 3D model: HTSSOP-28-EP (KiCad packages3D, STEP)+- 3D model files: `drv8424pwpr-etched.step` / `drv8424pwpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `drv8424pwpr.step` / `drv8424pwpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/drv8425) (56 pp, sha256 `d2894da743bf3f58`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/drv8424pwpr-datasheet.pdf)
page.jsonadded+271@@ -0,0 +1,271 @@+{+ "slug": "drv8424pwpr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Stepper Motor Driver, HTSSOP-28-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "motor driver ics",+ "drv8424pwpr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "drv8424pwpr.kicad_sym",+ "drv8424pwpr.kicad_mod",+ "drv8424pwpr.glb",+ "drv8424pwpr.step",+ "drv8424pwpr.lbr",+ "docs/hero.png",+ "docs/drv8424pwpr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "DRV8424PWPR",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-28-EP",+ "pin_count": 29,+ "category": "Motor Driver ICs",+ "subcategory": "Stepper Motor Driver",+ "datasheet": "https://www.ti.com/cn/lit/gpn/drv8425",+ "parts": {+ "symbol": "drv8424pwpr.kicad_sym",+ "footprint": "drv8424pwpr.kicad_mod",+ "model_3d": "drv8424pwpr-etched.glb",+ "model_3d_plain": "drv8424pwpr.glb",+ "model_3d_step": "drv8424pwpr-etched.step",+ "model_3d_step_plain": "drv8424pwpr.step",+ "lbr": "drv8424pwpr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2864825"+ },+ "pins": [+ {+ "number": "1",+ "name": "VCP",+ "type": "passive",+ "description": "Charge pump output; connect 0.22µF 16V ceramic capacitor to VM."+ },+ {+ "number": "2",+ "name": "VM",+ "type": "power_in",+ "description": "Motor power supply input, 4.5 to 33V operating range; bypass with two 0.01µF and one bulk ceramic capacitor to PGND."+ },+ {+ "number": "3",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground; connect to system ground."+ },+ {+ "number": "4",+ "name": "AOUT1",+ "type": "output",+ "description": "Motor winding A output, up to 4A peak current; connect to stepper motor winding."+ },+ {+ "number": "5",+ "name": "AOUT1",+ "type": "output",+ "description": "Motor winding A output, up to 4A peak current; connect to stepper motor winding."+ },+ {+ "number": "6",+ "name": "AOUT2",+ "type": "output",+ "description": "Motor winding A output, up to 4A peak current; connect to stepper motor winding."+ },+ {+ "number": "7",+ "name": "AOUT2",+ "type": "output",+ "description": "Motor winding A output, up to 4A peak current; connect to stepper motor winding."+ },+ {+ "number": "8",+ "name": "BOUT2",+ "type": "output",+ "description": "Motor winding B output, up to 4A peak current; connect to stepper motor winding."+ },+ {+ "number": "9",+ "name": "BOUT2",+ "type": "output",+ "description": "Motor winding B output, up to 4A peak current; connect to stepper motor winding."+ },+ {+ "number": "10",+ "name": "BOUT1",+ "type": "output",+ "description": "Motor winding B output, up to 4A peak current; connect to stepper motor winding."+ },+ {+ "number": "11",+ "name": "BOUT1",+ "type": "output",+ "description": "Motor winding B output, up to 4A peak current; connect to stepper motor winding."+ },+ {+ "number": "12",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground; connect to system ground."+ },+ {+ "number": "13",+ "name": "VM",+ "type": "power_in",+ "description": "Motor power supply input, 4.5 to 33V operating range; bypass with two 0.01µF and one bulk ceramic capacitor to PGND."+ },+ {+ "number": "14",+ "name": "GND",+ "type": "power_in",+ "description": "Device logic ground; connect to system ground."+ },+ {+ "number": "15",+ "name": "DVDD",+ "type": "power_out",+ "description": "Internal regulated 5V logic supply output, maximum 2mA load; bypass with 0.47-1µF capacitor to GND."+ },+ {+ "number": "16",+ "name": "nFAULT",+ "type": "tri_state",+ "description": "Fault indicator open-drain output, pulled low on fault condition; requires external pull-up resistor."+ },+ {+ "number": "17",+ "name": "VREF",+ "type": "power_in",+ "description": "Current reference input, 0.05 to 3.3V (DRV8424); sets full-scale motor current by ITRIP = VREF/1.32."+ },+ {+ "number": "18",+ "name": "M0",+ "type": "input",+ "description": "Microstepping mode select input with internal pull-down; configure with M1 for step mode 1/1 to 1/256."+ },+ {+ "number": "19",+ "name": "TOFF",+ "type": "input",+ "description": "PWM off-time four-level input; selects 7µs, 16µs, 24µs, or 32µs chopping time."+ },+ {+ "number": "20",+ "name": "DECAY1",+ "type": "input",+ "description": "Decay mode select input; configure with DECAY0 for slow, mixed, or smart decay modes."+ },+ {+ "number": "21",+ "name": "DECAY0",+ "type": "input",+ "description": "Decay mode select input; configure with DECAY1 for slow, mixed, or smart decay modes."+ },+ {+ "number": "22",+ "name": "M1",+ "type": "input",+ "description": "Microstepping mode select input with internal pull-down; configure with M0 for step mode 1/1 to 1/256."+ },+ {+ "number": "23",+ "name": "STEP",+ "type": "input",+ "description": "Step pulse input, rising edge advances stepper one microstep; accepts up to 500kHz with internal pull-down."+ },+ {+ "number": "24",+ "name": "DIR",+ "type": "input",+ "description": "Direction control input; logic level selects forward or reverse motor rotation with internal pull-down."+ },+ {+ "number": "25",+ "name": "ENABLE",+ "type": "input",+ "description": "Device enable control input; logic low disables outputs, logic high enables, with internal pull-up to DVDD."+ },+ {+ "number": "26",+ "name": "nSLEEP",+ "type": "input",+ "description": "Sleep mode control input; logic high enables device, logic low enters 2µA sleep mode with internal pull-down."+ },+ {+ "number": "27",+ "name": "CPL",+ "type": "passive",+ "description": "Charge pump switching node low side; connect 0.022µF ceramic capacitor to CPH."+ },+ {+ "number": "28",+ "name": "CPH",+ "type": "passive",+ "description": "Charge pump switching node high side; connect 0.022µF ceramic capacitor to CPL."+ },+ {+ "number": "29",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Thermal pad (PAD) does not have a traditional numeric pin assignment per KiCad convention; listed wi; Datasheet source is in Chinese; pin descriptions translated to English from Table 5-1 (pages 5-6).",+ "exposed pad 29 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 56,+ "cost_usd": 0.4952,+ "at": "2026-09-24T10:59:48"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/drv8425",+ "pages": 56,+ "sha256": "d2894da743bf3f58",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 29,+ "described": 29,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}