DRV5033

@@ -1,8 +1,11 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "drv5033",+  "title": "DRV5033",+  "brief": "TI omnipolar Hall-effect switch, SOT-23. Open-drain, 2.5-38 V, either-polarity sensing. Datasheet-verified.",   "version": "0.1.0",-  "type": "component",-  "description": "TI omnipolar Hall-effect switch, SOT-23. Open-drain, 2.5-38 V, either-polarity sensing. Datasheet-verified.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "sensor",@@ -11,6 +14,91 @@     "sot-23",     "texas-instruments"   ],+  "component": {+    "mpn": "DRV5033",+    "manufacturer": "Texas Instruments",+    "package": "SOT-23-3",+    "pin_count": 3,+    "category": "Sensor",+    "subcategory": "Hall-effect switch (magnetic)",+    "datasheet": "https://www.ti.com/lit/ds/symlink/drv5033.pdf",+    "parts": {+      "symbol": "drv5033.kicad_sym",+      "footprint": "drv5033.kicad_mod",+      "model_3d": "drv5033.glb"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "VCC",+        "type": "power_in",+        "description": "2.5 to 38 V power supply. Bypass this pin to GND with a 0.01 uF (minimum) ceramic capacitor rated for VCC. Typical operating supply current is 2.7 mA at 25 degC. Reverse-supply protection down to -22 V."+      },+      {+        "number": "2",+        "name": "OUT",+        "type": "output",+        "description": "Hall sensor open-drain output. Requires an external pullup resistor. Output goes low when |B| > B_OP and releases (Hi-Z) when |B| < B_RP. Maximum 30 mA sink, r_DS(on) ~22 ohm at 3.3 V/10 mA, overcurrent protection typ 30 mA."+      },+      {+        "number": "3",+        "name": "GND",+        "type": "power_in",+        "description": "Ground pin. Device reference for VCC and OUT."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/drv5033.pdf",+        "pages": 32,+        "sha256": "afccaa328566cc52",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 3,+        "described": 3,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Type": "Digital omnipolar Hall-effect switch",+      "Output": "Open-drain (active low, needs pull-up)",+      "Sensing": "Either polarity (omnipolar)",+      "Supply voltage": "2.5-38 V (reverse to -22 V)",+      "Output sink": "30 mA",+      "Front end": "Chopper-stabilized",+      "Package": "SOT-23-3",+      "Body (L\u00d7W\u00d7H)": "2.9 \u00d7 1.3 \u00d7 1.12 mm"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "drv5033",+    "hall effect sensor",+    "magnetic switch sensor",+    "omnipolar hall switch"+  ],+  "discovery_pitch": "DRV5033 digital omnipolar Hall-effect switch (SOT-23) with datasheet-verified pinout, KiCad symbol/footprint/3D, and full provenance.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -26,10 +114,5 @@     "docs/drv5033-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file