DRV2667RGPR

@@ -53,13 +53,13 @@         "number": "1",         "name": "PUMP",         "type": "power_out",-        "description": "Internal charge pump output voltage for gate drive; requires 0.1-\u00b5F storage capacitor (X5R or X7R type, 10-V rating minimum)."+        "description": "Internal charge pump output voltage for gate drive; requires 0.1-µF storage capacitor (X5R or X7R type, 10-V rating minimum)."       },       {         "number": "2",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply input ranging 3.3 V to 5.5 V; requires 1-\u00b5F decoupling capacitor."+        "description": "Positive supply input ranging 3.3 V to 5.5 V; requires 1-µF decoupling capacitor."       },       {         "number": "3",@@ -89,13 +89,13 @@         "number": "7",         "name": "SW",         "type": "passive",-        "description": "Boost converter internal switch node connecting external inductor (3.3 \u00b5H to 22 \u00b5H); inductor saturation current must exceed programmed limit."+        "description": "Boost converter internal switch node connecting external inductor (3.3 µH to 22 µH); inductor saturation current must exceed programmed limit."       },       {         "number": "8",         "name": "SW",         "type": "passive",-        "description": "Boost converter internal switch node connecting external inductor (3.3 \u00b5H to 22 \u00b5H); inductor saturation current must exceed programmed limit."+        "description": "Boost converter internal switch node connecting external inductor (3.3 µH to 22 µH); inductor saturation current must exceed programmed limit."       },       {         "number": "9",@@ -107,13 +107,13 @@         "number": "10",         "name": "BST",         "type": "power_out",-        "description": "Boost converter output voltage (programmable 15 V to 105 V maximum); requires 0.1-\u00b5F capacitor rated for boost output voltage."+        "description": "Boost converter output voltage (programmable 15 V to 105 V maximum); requires 0.1-µF capacitor rated for boost output voltage."       },       {         "number": "11",         "name": "BST",         "type": "power_out",-        "description": "Boost converter output voltage (programmable 15 V to 105 V maximum); requires 0.1-\u00b5F capacitor rated for boost output voltage."+        "description": "Boost converter output voltage (programmable 15 V to 105 V maximum); requires 0.1-µF capacitor rated for boost output voltage."       },       {         "number": "12",@@ -137,37 +137,37 @@         "number": "15",         "name": "REXT",         "type": "input",-        "description": "Boost converter peak current limit programming input; connect resistor to ground (6 k\u03a9 to 35 k\u03a9 range) to set inductor peak current."+        "description": "Boost converter peak current limit programming input; connect resistor to ground (6 kΩ to 35 kΩ range) to set inductor peak current."       },       {         "number": "16",         "name": "IN-",         "type": "input",-        "description": "Negative analog input for optional analog playback mode with 100-k\u03a9 input impedance and 1.8-V differential range."+        "description": "Negative analog input for optional analog playback mode with 100-kΩ input impedance and 1.8-V differential range."       },       {         "number": "17",         "name": "IN+",         "type": "input",-        "description": "Positive analog input for optional analog playback mode with 100-k\u03a9 input impedance and 1.8-V differential range."+        "description": "Positive analog input for optional analog playback mode with 100-kΩ input impedance and 1.8-V differential range."       },       {         "number": "18",         "name": "SCL",         "type": "input",-        "description": "I\u00b2C serial clock input supporting operation up to 400 kHz with 1.8-V logic threshold compatible to VDD."+        "description": "I²C serial clock input supporting operation up to 400 kHz with 1.8-V logic threshold compatible to VDD."       },       {         "number": "19",         "name": "SDA",         "type": "bidirectional",-        "description": "I\u00b2C serial data input/output with open-drain architecture; 1.8-V logic threshold compatible to VDD."+        "description": "I²C serial data input/output with open-drain architecture; 1.8-V logic threshold compatible to VDD."       },       {         "number": "20",         "name": "REG",         "type": "output",-        "description": "1.8-V regulated output for auxiliary circuits; requires 0.1-\u00b5F decoupling capacitor."+        "description": "1.8-V regulated output for auxiliary circuits; requires 0.1-µF decoupling capacitor."       },       {         "number": "21",@@ -210,6 +210,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "drv2667rgpr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.0,+          4.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "c9476a1612023de37f27b4972110ab6ac6dc0eaf5ac48957a2e1c497650082a5",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "drv2667rgpr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.0,+          4.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "fe6fffd913816237b1aeae12f0d38399c8220c6d15071994afd7f563ad85882c",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}