component
DRV2667RGPR
Public Made by Adomby adom
Texas Instruments Global Sourcing Parts, TQFN-20-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+16−13@@ -38,13 +38,13 @@ "number": "1", "name": "PUMP", "type": "power_out",- "description": "Internal charge pump output voltage for gate drive; requires 0.1-\u00b5F storage capacitor (X5R or X7R type, 10-V rating minimum)."+ "description": "Internal charge pump output voltage for gate drive; requires 0.1-µF storage capacitor (X5R or X7R type, 10-V rating minimum)." }, { "number": "2", "name": "VDD", "type": "power_in",- "description": "Positive supply input ranging 3.3 V to 5.5 V; requires 1-\u00b5F decoupling capacitor."+ "description": "Positive supply input ranging 3.3 V to 5.5 V; requires 1-µF decoupling capacitor." }, { "number": "3",@@ -74,13 +74,13 @@ "number": "7", "name": "SW", "type": "passive",- "description": "Boost converter internal switch node connecting external inductor (3.3 \u00b5H to 22 \u00b5H); inductor saturation current must exceed programmed limit."+ "description": "Boost converter internal switch node connecting external inductor (3.3 µH to 22 µH); inductor saturation current must exceed programmed limit." }, { "number": "8", "name": "SW", "type": "passive",- "description": "Boost converter internal switch node connecting external inductor (3.3 \u00b5H to 22 \u00b5H); inductor saturation current must exceed programmed limit."+ "description": "Boost converter internal switch node connecting external inductor (3.3 µH to 22 µH); inductor saturation current must exceed programmed limit." }, { "number": "9",@@ -92,13 +92,13 @@ "number": "10", "name": "BST", "type": "power_out",- "description": "Boost converter output voltage (programmable 15 V to 105 V maximum); requires 0.1-\u00b5F capacitor rated for boost output voltage."+ "description": "Boost converter output voltage (programmable 15 V to 105 V maximum); requires 0.1-µF capacitor rated for boost output voltage." }, { "number": "11", "name": "BST", "type": "power_out",- "description": "Boost converter output voltage (programmable 15 V to 105 V maximum); requires 0.1-\u00b5F capacitor rated for boost output voltage."+ "description": "Boost converter output voltage (programmable 15 V to 105 V maximum); requires 0.1-µF capacitor rated for boost output voltage." }, { "number": "12",@@ -122,37 +122,37 @@ "number": "15", "name": "REXT", "type": "input",- "description": "Boost converter peak current limit programming input; connect resistor to ground (6 k\u03a9 to 35 k\u03a9 range) to set inductor peak current."+ "description": "Boost converter peak current limit programming input; connect resistor to ground (6 kΩ to 35 kΩ range) to set inductor peak current." }, { "number": "16", "name": "IN-", "type": "input",- "description": "Negative analog input for optional analog playback mode with 100-k\u03a9 input impedance and 1.8-V differential range."+ "description": "Negative analog input for optional analog playback mode with 100-kΩ input impedance and 1.8-V differential range." }, { "number": "17", "name": "IN+", "type": "input",- "description": "Positive analog input for optional analog playback mode with 100-k\u03a9 input impedance and 1.8-V differential range."+ "description": "Positive analog input for optional analog playback mode with 100-kΩ input impedance and 1.8-V differential range." }, { "number": "18", "name": "SCL", "type": "input",- "description": "I\u00b2C serial clock input supporting operation up to 400 kHz with 1.8-V logic threshold compatible to VDD."+ "description": "I²C serial clock input supporting operation up to 400 kHz with 1.8-V logic threshold compatible to VDD." }, { "number": "19", "name": "SDA", "type": "bidirectional",- "description": "I\u00b2C serial data input/output with open-drain architecture; 1.8-V logic threshold compatible to VDD."+ "description": "I²C serial data input/output with open-drain architecture; 1.8-V logic threshold compatible to VDD." }, { "number": "20", "name": "REG", "type": "output",- "description": "1.8-V regulated output for auxiliary circuits; requires 0.1-\u00b5F decoupling capacitor."+ "description": "1.8-V regulated output for auxiliary circuits; requires 0.1-µF decoupling capacitor." }, { "number": "21",@@ -238,5 +238,8 @@ "docs/drv2667rgpr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }