component
DP83867CRRGZR
Public Made by Adomby adom
Texas Instruments Ethernet Controllers, VQFN-48-EP(7x7). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+17−14@@ -44,7 +44,7 @@ "number": "3", "name": "VDDA2P5", "type": "power_in",- "description": "2.5V analog supply (\u00b15%). Requires 1\u00b5F + 0.1\u00b5F decoupling to GND."+ "description": "2.5V analog supply (±5%). Requires 1µF + 0.1µF decoupling to GND." }, { "number": "4",@@ -62,7 +62,7 @@ "number": "6", "name": "VDD1P0", "type": "power_in",- "description": "1.0V digital core supply (+15.5%, -5%). Requires 1\u00b5F + 0.1\u00b5F decoupling to GND."+ "description": "1.0V digital core supply (+15.5%, -5%). Requires 1µF + 0.1µF decoupling to GND." }, { "number": "7",@@ -80,7 +80,7 @@ "number": "9", "name": "VDDA2P5", "type": "power_in",- "description": "2.5V analog supply (\u00b15%). Requires 1\u00b5F + 0.1\u00b5F decoupling to GND."+ "description": "2.5V analog supply (±5%). Requires 1µF + 0.1µF decoupling to GND." }, { "number": "10",@@ -98,13 +98,13 @@ "number": "12", "name": "RBIAS", "type": "passive",- "description": "Bias resistor connection. Connect an 11k\u03a9 \u00b11% resistor from RBIAS to GND to set internal reference currents."+ "description": "Bias resistor connection. Connect an 11kΩ ±1% resistor from RBIAS to GND to set internal reference currents." }, { "number": "13", "name": "VDDA1P8", "type": "power_in",- "description": "1.8V analog supply (\u00b15%). May be left unconnected (internal LDO) or driven with external 1.8V for lower power; when driven, requires 1\u00b5F + 0.1\u00b5F to GND."+ "description": "1.8V analog supply (±5%). May be left unconnected (internal LDO) or driven with external 1.8V for lower power; when driven, requires 1µF + 0.1µF to GND." }, { "number": "14",@@ -116,7 +116,7 @@ "number": "15", "name": "XI", "type": "input",- "description": "Crystal/oscillator input. 25MHz reference (\u00b150 ppm), from crystal (with XO) or single-ended oscillator."+ "description": "Crystal/oscillator input. 25MHz reference (±50 ppm), from crystal (with XO) or single-ended oscillator." }, { "number": "16",@@ -128,7 +128,7 @@ "number": "17", "name": "MDIO", "type": "bidirectional",- "description": "MII Management Data I/O. Bi-directional management data line. External pull-up required (1.5k\u03a9 per IEEE, 2.2k\u03a9 acceptable) to VDDIO."+ "description": "MII Management Data I/O. Bi-directional management data line. External pull-up required (1.5kΩ per IEEE, 2.2kΩ acceptable) to VDDIO." }, { "number": "18",@@ -140,7 +140,7 @@ "number": "19", "name": "VDDIO", "type": "power_in",- "description": "Digital I/O supply. Selectable 1.8V, 2.5V, or 3.3V (\u00b15%). Requires 1\u00b5F + 0.1\u00b5F to GND."+ "description": "Digital I/O supply. Selectable 1.8V, 2.5V, or 3.3V (±5%). Requires 1µF + 0.1µF to GND." }, { "number": "20",@@ -206,7 +206,7 @@ "number": "30", "name": "VDDIO", "type": "power_in",- "description": "Digital I/O supply. Selectable 1.8V, 2.5V, or 3.3V (\u00b15%)."+ "description": "Digital I/O supply. Selectable 1.8V, 2.5V, or 3.3V (±5%)." }, { "number": "31",@@ -272,7 +272,7 @@ "number": "41", "name": "VDDIO", "type": "power_in",- "description": "Digital I/O supply. Selectable 1.8V, 2.5V, or 3.3V (\u00b15%)."+ "description": "Digital I/O supply. Selectable 1.8V, 2.5V, or 3.3V (±5%)." }, { "number": "42",@@ -284,13 +284,13 @@ "number": "43", "name": "RESET_N", "type": "input",- "description": "Active-low hardware reset. Assert low for \u22651\u00b5s to reset all internal registers to defaults. Internal pull-up."+ "description": "Active-low hardware reset. Assert low for ≥1µs to reset all internal registers to defaults. Internal pull-up." }, { "number": "44", "name": "INT/PWDN", "type": "bidirectional",- "description": "Dual-function interrupt output / power-down input. Default is active-low power-down; can be reconfigured via register as active-low open-drain interrupt (needs 2.2k\u03a9 pull-up to VDDIO). Internal pull-up."+ "description": "Dual-function interrupt output / power-down input. Default is active-low power-down; can be reconfigured via register as active-low open-drain interrupt (needs 2.2kΩ pull-up to VDDIO). Internal pull-up." }, { "number": "45",@@ -314,7 +314,7 @@ "number": "48", "name": "VDDA1P8", "type": "power_in",- "description": "1.8V analog supply (\u00b15%). May be left unconnected (internal LDO) or driven externally with 1\u00b5F + 0.1\u00b5F decoupling."+ "description": "1.8V analog supply (±5%). May be left unconnected (internal LDO) or driven externally with 1µF + 0.1µF decoupling." }, { "number": "49",@@ -384,5 +384,8 @@ "docs/dp83867crrgzr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }