component
DIO6970TST6
Public Made by Adomby adom
DIOO DC-DC Converters, TSOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -44,25 +44,25 @@ "number": "3", "name": "VIN", "type": "power_in",- "description": "Power input, 4.5V to 24V (28V abs max). Bypass to GND with a low-ESR ceramic capacitor (\u22654.7\u00b5F X5R) placed close to the pin."+ "description": "Power input, 4.5V to 24V (28V abs max). Bypass to GND with a low-ESR ceramic capacitor (≥4.7µF X5R) placed close to the pin." }, { "number": "4", "name": "FB", "type": "input",- "description": "Output feedback pin. Connect to the center tap of the output resistor divider to program VOUT = 0.8V \u00d7 (1 + R1/R2). Internal reference is 0.8V typical (0.788-0.812V). Optional 10-47pF feed-forward cap in parallel with R1 speeds up transient response."+ "description": "Output feedback pin. Connect to the center tap of the output resistor divider to program VOUT = 0.8V × (1 + R1/R2). Internal reference is 0.8V typical (0.788-0.812V). Optional 10-47pF feed-forward cap in parallel with R1 speeds up transient response." }, { "number": "5", "name": "EN", "type": "input",- "description": "Enable control input. Pull high (VENH \u2265 1.5V) to enable the regulator; pull low (VENL \u2264 0.4V) to shut down. Do not float. Add a 1M\u03a9 pull-down to GND if driven from a high-impedance source connected to a battery rail."+ "description": "Enable control input. Pull high (VENH ≥ 1.5V) to enable the regulator; pull low (VENL ≤ 0.4V) to shut down. Do not float. Add a 1MΩ pull-down to GND if driven from a high-impedance source connected to a battery rail." }, { "number": "6", "name": "BS", "type": "passive",- "description": "Bootstrap pin for the high-side switch gate driver. Connect a 100nF (0.1\u00b5F) low-ESR ceramic capacitor between BS and SW to form a floating supply. Absolute max is SW+6V."+ "description": "Bootstrap pin for the high-side switch gate driver. Connect a 100nF (0.1µF) low-ESR ceramic capacitor between BS and SW to form a floating supply. Absolute max is SW+6V." } ], "provenance": {@@ -126,5 +126,8 @@ "docs/dio6970tst6-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }