dio6913tst6

@@ -33,5 +33,66 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "DIO6913TST6",+    "manufacturer": "DIOO",+    "package": "TSOT-23-6",+    "pin_count": 6,+    "category": "DC-DC Converters",+    "parts": {+      "symbol": "dio6913tst6.kicad_sym",+      "footprint": "dio6913tst6.kicad_mod",+      "model_3d": "dio6913tst6-etched.glb",+      "model_3d_plain": "dio6913tst6.glb",+      "model_3d_step": "dio6913tst6-etched.step",+      "model_3d_step_plain": "dio6913tst6.step",+      "lbr": "dio6913tst6.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "BS",+        "type": "passive",+        "description": "Bootstrap pin. Connect a 0.1µF capacitor (and typically a resistor) between LX and BS to form a floating supply across the high-side switch driver. Absolute max FB/BS voltage is 6V."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Power ground. Return path for both signal and power currents; connect to a large copper pour or ground plane for best thermal and noise performance."+      },+      {+        "number": "3",+        "name": "FB",+        "type": "input",+        "description": "Output feedback pin. Connect to the center tap of the output resistor divider to program VOUT = 0.6V × (1 + R1/R2). Internal reference is 0.6V (typ). Optional 10-47pF cap across R1 speeds transient response."+      },+      {+        "number": "4",+        "name": "EN",+        "type": "input",+        "description": "Enable control. Pull high (>1.5V rising threshold) to turn on the regulator; pull low (<0.4V falling threshold) to shut down. Do not float. Max voltage VIN+0.3V."+      },+      {+        "number": "5",+        "name": "IN",+        "type": "power_in",+        "description": "Power input. Supply voltage range 4.5V to 24V (28V absolute max). Bypass with a 10µF X5R (or better) low-ESR ceramic capacitor placed close to IN/GND with minimum loop area."+      },+      {+        "number": "6",+        "name": "LX",+        "type": "output",+        "description": "Switching node. Connect to the output inductor. Internal top (80mΩ) and bottom (40mΩ) FETs switch this node between IN and GND at ~500kHz. Max voltage VIN+0.3V; minimize PCB copper area on this net to reduce EMI."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}