DIO2133CT14

@@ -4,7 +4,7 @@   "slug": "dio2133ct14",   "title": "DIO2133CT14",   "brief": "DIOO Audio Power OpAmps, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.2.0",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -40,13 +40,13 @@         "number": "2",         "name": "-INR",         "type": "input",-        "description": "Right-channel negative (inverting) differential audio input. Feedback resistor Rfb connects between this pin and OUTR to set closed-loop gain (\u00b11V/V to \u00b110V/V)."+        "description": "Right-channel negative (inverting) differential audio input. Feedback resistor Rfb connects between this pin and OUTR to set closed-loop gain (±1V/V to ±10V/V)."       },       {         "number": "3",         "name": "OUTR",         "type": "output",-        "description": "Right-channel audio output. Drives 600\u03a9 load direct-coupled (no DC-blocking cap required) up to 3Vrms with 5V supply; HBM ESD-protected to 8kV."+        "description": "Right-channel audio output. Drives 600Ω load direct-coupled (no DC-blocking cap required) up to 3Vrms with 5V supply; HBM ESD-protected to 8kV."       },       {         "number": "4",@@ -58,31 +58,31 @@         "number": "5",         "name": "EN",         "type": "input",-        "description": "Chip enable, active-high (VIH \u2265 1.2V at VDD=5V, \u22651.1V at 3.3V; VIL \u2264 0.4V/0.3V). Driving EN low places the device in shutdown with ~90dB input-to-output attenuation and \u22641mA IDD."+        "description": "Chip enable, active-high (VIH ≥ 1.2V at VDD=5V, ≥1.1V at 3.3V; VIL ≤ 0.4V/0.3V). Driving EN low places the device in shutdown with ~90dB input-to-output attenuation and ≤1mA IDD."       },       {         "number": "6",         "name": "PVSS",         "type": "power_out",-        "description": "Negative supply rail generated by the internal charge pump. Bypass to ground with a 1\u00b5F CPVSS reservoir capacitor; provides the negative rail that eliminates the need for output DC-blocking capacitors."+        "description": "Negative supply rail generated by the internal charge pump. Bypass to ground with a 1µF CPVSS reservoir capacitor; provides the negative rail that eliminates the need for output DC-blocking capacitors."       },       {         "number": "7",         "name": "CN",         "type": "bidirectional",-        "description": "Charge-pump flying capacitor negative terminal. Connect a 1\u00b5F CPUMP capacitor between CP (pin 8) and CN; switching frequency \u2248310kHz."+        "description": "Charge-pump flying capacitor negative terminal. Connect a 1µF CPUMP capacitor between CP (pin 8) and CN; switching frequency ≈310kHz."       },       {         "number": "8",         "name": "CP",         "type": "bidirectional",-        "description": "Charge-pump flying capacitor positive terminal. Connect a 1\u00b5F CPUMP capacitor between CP and CN (pin 7)."+        "description": "Charge-pump flying capacitor positive terminal. Connect a 1µF CPUMP capacitor between CP and CN (pin 7)."       },       {         "number": "9",         "name": "PVDD",         "type": "power_in",-        "description": "Positive supply input, 3.0V to 5.5V (absolute max 7.5V). Powers the driver and charge pump; bypass locally to PGND. IDD \u2248 11mA at 3.3V, 12mA at 5V (no load)."+        "description": "Positive supply input, 3.0V to 5.5V (absolute max 7.5V). Powers the driver and charge pump; bypass locally to PGND. IDD ≈ 11mA at 3.3V, 12mA at 5V (no load)."       },       {         "number": "10",@@ -94,19 +94,19 @@         "number": "11",         "name": "UVP",         "type": "input",-        "description": "External under-voltage detection input; typical threshold VUVP = 1.11V (1.08V min, 1.14V max) with 5\u00b5A hysteresis current. Drive from a resistor divider off the monitored rail; when the divided voltage falls below VUVP the outputs are muted for pop-free shutdown."+        "description": "External under-voltage detection input; typical threshold VUVP = 1.11V (1.08V min, 1.14V max) with 5µA hysteresis current. Drive from a resistor divider off the monitored rail; when the divided voltage falls below VUVP the outputs are muted for pop-free shutdown."       },       {         "number": "12",         "name": "OUTL",         "type": "output",-        "description": "Left-channel audio output. Drives 600\u03a9 load direct-coupled (no DC-blocking cap required) up to 3Vrms with 5V supply; HBM ESD-protected to 8kV."+        "description": "Left-channel audio output. Drives 600Ω load direct-coupled (no DC-blocking cap required) up to 3Vrms with 5V supply; HBM ESD-protected to 8kV."       },       {         "number": "13",         "name": "-INL",         "type": "input",-        "description": "Left-channel negative (inverting) differential audio input. Feedback resistor Rfb connects between this pin and OUTL to set closed-loop gain (\u00b11V/V to \u00b110V/V)."+        "description": "Left-channel negative (inverting) differential audio input. Feedback resistor Rfb connects between this pin and OUTL to set closed-loop gain (±1V/V to ±10V/V)."       },       {         "number": "14",@@ -186,9 +186,9 @@     "docs/hero.png",     "docs/dio2133ct14-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "pads.json"   ],-  "visibility": {-    "public": true-  }+  "visibility": "public",+  "description": "DIOO Audio Power OpAmps, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D." }\ No newline at end of file