← Commit history

Initial commit: component/dac80508zrtet

Ray ·24cc10ca18 ·
2 files changed +266
README.mdadded+54
@@ -0,0 +1,54 @@+# DAC80508ZRTET++**Texas Instruments** · Digital To Analog Converters (DAC) · WQFN-16-EP(3x3)++DAC80508ZRTET from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | REF | bidirectional | Internal reference output (2.5V default, ±5mV initial accuracy max) or external reference input (1.2V to VDD depending on divider setting). |+| 2 | OUT0 | output | Analog DAC output channel 0. |+| 3 | OUT1 | output | Analog DAC output channel 1. |+| 4 | OUT2 | output | Analog DAC output channel 2. |+| 5 | OUT3 | output | Analog DAC output channel 3. |+| 6 | GND | power_in | Ground reference point for all on-chip circuitry. |+| 7 | VDD | power_in | Analog supply voltage, 2.7V to 5.5V. |+| 8 | OUT4 | output | Analog DAC output channel 4. |+| 9 | OUT5 | output | Analog DAC output channel 5. |+| 10 | OUT6 | output | Analog DAC output channel 6. |+| 11 | OUT7 | output | Analog DAC output channel 7. |+| 12 | CS | input | Active-low chip select, frame synchronization signal for serial interface input shift register. |+| 13 | SCLK | input | Serial interface clock, up to 50MHz. |+| 14 | SDI | input | Serial interface data input, clocked on falling edges of SCLK. |+| 15 | SDO/ALARM | tri_state | Serial data output (default, high-impedance when CS high) or open-drain alarm output for CRC/reference errors with 10kΩ pull-up to VIO. |+| 16 | VIO | power_in | I/O supply voltage, 1.7V to 5.5V, sets serial interface operating voltage. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-16-EP(3x3) |+| Category | Data Acquisition |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `DAC80508ZRTET`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `dac80508zrtet-etched.step` / `dac80508zrtet-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `dac80508zrtet.step` / `dac80508zrtet.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/dac60508) (59 pp, sha256 `0cc679c7f01fd2b7`, retrieved 2026-10-01, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/dac80508zrtet-datasheet.pdf)
page.jsonadded+212
@@ -0,0 +1,212 @@+{+  "slug": "dac80508zrtet",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Digital To Analog Converters (DAC), WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "dac80508zrtet",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "dac80508zrtet.kicad_sym",+    "dac80508zrtet.kicad_mod",+    "dac80508zrtet.glb",+    "dac80508zrtet.step",+    "dac80508zrtet.lbr",+    "docs/hero.png",+    "docs/dac80508zrtet-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "DAC80508ZRTET",+    "manufacturer": "Texas Instruments",+    "package": "WQFN-16-EP(3x3)",+    "pin_count": 17,+    "category": "Data Acquisition",+    "subcategory": "Digital To Analog Converters (DAC)",+    "datasheet": "https://www.ti.com/cn/lit/gpn/dac60508",+    "parts": {+      "symbol": "dac80508zrtet.kicad_sym",+      "footprint": "dac80508zrtet.kicad_mod",+      "model_3d": "dac80508zrtet-etched.glb",+      "model_3d_plain": "dac80508zrtet.glb",+      "model_3d_step": "dac80508zrtet-etched.step",+      "model_3d_step_plain": "dac80508zrtet.step",+      "lbr": "dac80508zrtet.lbr"+    },+    "distributor_links": {+      "lcsc": "C2863226",+      "digikey": "296-52293-2-ND",+      "mouser": "595-DAC80508ZRTET"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T08:02:01Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-52293-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-DAC80508ZRTET",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "REF",+        "type": "bidirectional",+        "description": "Internal reference output (2.5V default, ±5mV initial accuracy max) or external reference input (1.2V to VDD depending on divider setting)."+      },+      {+        "number": "2",+        "name": "OUT0",+        "type": "output",+        "description": "Analog DAC output channel 0."+      },+      {+        "number": "3",+        "name": "OUT1",+        "type": "output",+        "description": "Analog DAC output channel 1."+      },+      {+        "number": "4",+        "name": "OUT2",+        "type": "output",+        "description": "Analog DAC output channel 2."+      },+      {+        "number": "5",+        "name": "OUT3",+        "type": "output",+        "description": "Analog DAC output channel 3."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference point for all on-chip circuitry."+      },+      {+        "number": "7",+        "name": "VDD",+        "type": "power_in",+        "description": "Analog supply voltage, 2.7V to 5.5V."+      },+      {+        "number": "8",+        "name": "OUT4",+        "type": "output",+        "description": "Analog DAC output channel 4."+      },+      {+        "number": "9",+        "name": "OUT5",+        "type": "output",+        "description": "Analog DAC output channel 5."+      },+      {+        "number": "10",+        "name": "OUT6",+        "type": "output",+        "description": "Analog DAC output channel 6."+      },+      {+        "number": "11",+        "name": "OUT7",+        "type": "output",+        "description": "Analog DAC output channel 7."+      },+      {+        "number": "12",+        "name": "CS",+        "type": "input",+        "description": "Active-low chip select, frame synchronization signal for serial interface input shift register."+      },+      {+        "number": "13",+        "name": "SCLK",+        "type": "input",+        "description": "Serial interface clock, up to 50MHz."+      },+      {+        "number": "14",+        "name": "SDI",+        "type": "input",+        "description": "Serial interface data input, clocked on falling edges of SCLK."+      },+      {+        "number": "15",+        "name": "SDO/ALARM",+        "type": "tri_state",+        "description": "Serial data output (default, high-impedance when CS high) or open-drain alarm output for CRC/reference errors with 10kΩ pull-up to VIO."+      },+      {+        "number": "16",+        "name": "VIO",+        "type": "power_in",+        "description": "I/O supply voltage, 1.7V to 5.5V, sets serial interface operating voltage."+      },+      {+        "number": "17",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: SDO/ALARM pin classified as tri_state due to high-impedance behavior when CS is high and open-drain ; This extraction is for the DAC80508Z variant with SDO function. The datasheet also covers DAC80508ZC",+          "exposed pad 17 added from the footprint"+        ],+        "pages_sent": 13,+        "cost_usd": 0.1948,+        "at": "2026-10-01T08:01:45"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/dac60508",+        "pages": 59,+        "sha256": "0cc679c7f01fd2b7",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file