component
DAC43608RTER
Public Made by Adomby adom
Texas Instruments Digital To Analog Converters (DAC), WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+54@@ -0,0 +1,54 @@+# DAC43608RTER++**Texas Instruments** · Digital To Analog Converters (DAC) · WQFN-16-EP(3x3)++DAC43608RTER from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VOUTA | output | Analog output voltage of DAC A |+| 2 | VOUTB | output | Analog output voltage of DAC B |+| 3 | VOUTC | output | Analog output voltage of DAC C |+| 4 | VOUTD | output | Analog output voltage of DAC D |+| 5 | SDA | bidirectional | I2C serial data line, open-drain bidirectional data line that must be connected to power supply voltage through external pull-up resistor |+| 6 | SCL | input | Serial interface clock input |+| 7 | A0 | input | Quad-state address input |+| 8 | LDAC | input | Load DAC pin for synchronous output update, active low |+| 9 | VOUTE | output | Analog output voltage of DAC E |+| 10 | VOUTF | output | Analog output voltage of DAC F |+| 11 | VOUTG | output | Analog output voltage of DAC G |+| 12 | VOUTH | output | Analog output voltage of DAC H |+| 13 | VDD | power_in | Analog power supply voltage, 1.8V to 5.5V |+| 14 | AGND | power_in | Ground reference point for all circuits on this device |+| 15 | VREFIN | input | Reference input voltage for the device |+| 16 | CLR | input | Asynchronous clear pin, active low |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-16-EP(3x3) |+| Category | Data Acquisition |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `DAC43608RTER`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `dac43608rter-etched.step` / `dac43608rter-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `dac43608rter.step` / `dac43608rter.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/dac53608) (45 pp, sha256 `2860193286fcc606`, retrieved 2026-10-07, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/dac43608rter-datasheet.pdf)
page.jsonadded+254@@ -0,0 +1,254 @@+{+ "slug": "dac43608rter",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Digital To Analog Converters (DAC), WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "dac43608rter",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "dac43608rter.kicad_sym",+ "dac43608rter.kicad_mod",+ "dac43608rter.glb",+ "dac43608rter.step",+ "dac43608rter.lbr",+ "docs/hero.png",+ "docs/dac43608rter-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "dac43608rter-hero.glb",+ "dac43608rter-hero.overlay.json"+ ],+ "component": {+ "mpn": "DAC43608RTER",+ "manufacturer": "Texas Instruments",+ "package": "WQFN-16-EP(3x3)",+ "pin_count": 17,+ "category": "Data Acquisition",+ "subcategory": "Digital To Analog Converters (DAC)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/dac53608",+ "parts": {+ "symbol": "dac43608rter.kicad_sym",+ "footprint": "dac43608rter.kicad_mod",+ "model_3d": "dac43608rter-hero.glb",+ "model_3d_plain": "dac43608rter.glb",+ "model_3d_step": "dac43608rter-etched.step",+ "model_3d_step_plain": "dac43608rter.step",+ "lbr": "dac43608rter.lbr"+ },+ "distributor_links": {+ "lcsc": "C2679432",+ "digikey": "296-DAC43608RTERTR-ND",+ "mouser": "595-DAC43608RTER"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T08:40:16Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-DAC43608RTERTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-DAC43608RTER",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VOUTA",+ "type": "output",+ "description": "Analog output voltage of DAC A"+ },+ {+ "number": "2",+ "name": "VOUTB",+ "type": "output",+ "description": "Analog output voltage of DAC B"+ },+ {+ "number": "3",+ "name": "VOUTC",+ "type": "output",+ "description": "Analog output voltage of DAC C"+ },+ {+ "number": "4",+ "name": "VOUTD",+ "type": "output",+ "description": "Analog output voltage of DAC D"+ },+ {+ "number": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "I2C serial data line, open-drain bidirectional data line that must be connected to power supply voltage through external pull-up resistor"+ },+ {+ "number": "6",+ "name": "SCL",+ "type": "input",+ "description": "Serial interface clock input"+ },+ {+ "number": "7",+ "name": "A0",+ "type": "input",+ "description": "Quad-state address input"+ },+ {+ "number": "8",+ "name": "LDAC",+ "type": "input",+ "description": "Load DAC pin for synchronous output update, active low"+ },+ {+ "number": "9",+ "name": "VOUTE",+ "type": "output",+ "description": "Analog output voltage of DAC E"+ },+ {+ "number": "10",+ "name": "VOUTF",+ "type": "output",+ "description": "Analog output voltage of DAC F"+ },+ {+ "number": "11",+ "name": "VOUTG",+ "type": "output",+ "description": "Analog output voltage of DAC G"+ },+ {+ "number": "12",+ "name": "VOUTH",+ "type": "output",+ "description": "Analog output voltage of DAC H"+ },+ {+ "number": "13",+ "name": "VDD",+ "type": "power_in",+ "description": "Analog power supply voltage, 1.8V to 5.5V"+ },+ {+ "number": "14",+ "name": "AGND",+ "type": "power_in",+ "description": "Ground reference point for all circuits on this device"+ },+ {+ "number": "15",+ "name": "VREFIN",+ "type": "input",+ "description": "Reference input voltage for the device"+ },+ {+ "number": "16",+ "name": "CLR",+ "type": "input",+ "description": "Asynchronous clear pin, active low"+ },+ {+ "number": "17",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Exposed pad (EP) mentioned in package designation is not explicitly listed in pin table with pin num",+ "exposed pad 17 added from the footprint"+ ],+ "pages_sent": 23,+ "cost_usd": 0.1865,+ "at": "2026-10-07T08:39:59"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/dac53608",+ "pages": 45,+ "sha256": "2860193286fcc606",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "dac43608rter.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 3,+ 0.785+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "dac43608rter-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 3,+ 0.785+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "309df58ff64671301ad7c26e5cb3e16f63caf4c3241d6c51801b49a5a1f08fcb",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}