component
D2822M SOP8
Public Made by Adomby adom
Silicore Audio Power OpAmps, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+10−7@@ -32,13 +32,13 @@ "number": "1", "name": "1OUT", "type": "output",- "description": "Channel 1 audio power amplifier output. Drives speaker/headphone load (typ. 32 \u03a9 / 16 \u03a9 / 8 \u03a9); peak output current up to 0.8 A. AC-couple to load via output capacitor in single-ended mode."+ "description": "Channel 1 audio power amplifier output. Drives speaker/headphone load (typ. 32 Ω / 16 Ω / 8 Ω); peak output current up to 0.8 A. AC-couple to load via output capacitor in single-ended mode." }, { "number": "2", "name": "Vcc", "type": "power_in",- "description": "Positive supply voltage. Operating range 1.8 V to 7.5 V (absolute max 9.0 V). Typical 3-6 V; bypass with 10 \u00b5F electrolytic + 0.1 \u00b5F ceramic near the pin."+ "description": "Positive supply voltage. Operating range 1.8 V to 7.5 V (absolute max 9.0 V). Typical 3-6 V; bypass with 10 µF electrolytic + 0.1 µF ceramic near the pin." }, { "number": "3",@@ -56,25 +56,25 @@ "number": "5", "name": "2IN-", "type": "input",- "description": "Channel 2 inverting input. Typically bypassed to ground through a 100 \u00b5F electrolytic (sets closed-loop gain of ~40 dB with internal feedback). Input impedance \u2265 100 k\u03a9."+ "description": "Channel 2 inverting input. Typically bypassed to ground through a 100 µF electrolytic (sets closed-loop gain of ~40 dB with internal feedback). Input impedance ≥ 100 kΩ." }, { "number": "6", "name": "2IN+", "type": "input",- "description": "Channel 2 non-inverting input. Audio signal input (AC-coupled through source impedance / 10 k\u03a9 bias resistor). In BTL bridge mode this pin is tied to ground while pin 7 receives the signal."+ "description": "Channel 2 non-inverting input. Audio signal input (AC-coupled through source impedance / 10 kΩ bias resistor). In BTL bridge mode this pin is tied to ground while pin 7 receives the signal." }, { "number": "7", "name": "1IN+", "type": "input",- "description": "Channel 1 non-inverting input. Audio signal input; source typically fed through a 10 k\u03a9 bias/pull-down resistor to ground."+ "description": "Channel 1 non-inverting input. Audio signal input; source typically fed through a 10 kΩ bias/pull-down resistor to ground." }, { "number": "8", "name": "1IN-", "type": "input",- "description": "Channel 1 inverting input. Typically bypassed to ground with a 100 \u00b5F electrolytic to set the AC gain. In BTL bridge mode this pin is fed from the output of the other channel to invert its signal."+ "description": "Channel 1 inverting input. Typically bypassed to ground with a 100 µF electrolytic to set the AC gain. In BTL bridge mode this pin is fed from the output of the other channel to invert its signal." } ], "provenance": {@@ -139,5 +139,8 @@ "docs/d2822m-sop8-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }