CP2104

@@ -1,8 +1,11 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "cp2104",+  "title": "CP2104",+  "brief": "Silicon Labs USB-to-UART bridge, QFN-24. USB 2.0 full-speed, up to 2 Mbps, integrated EEPROM + clock + regulator. Datasheet-verified.",   "version": "0.1.0",-  "type": "component",-  "description": "Silicon Labs USB-to-UART bridge, QFN-24. USB 2.0 full-speed, up to 2 Mbps, integrated EEPROM + clock + regulator. Datasheet-verified.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "interface",@@ -12,6 +15,218 @@     "qfn-24",     "silicon-labs"   ],+  "component": {+    "mpn": "CP2104",+    "manufacturer": "Silicon Labs",+    "package": "QFN-24",+    "pin_count": 24,+    "category": "Interface",+    "subcategory": "USB-to-UART bridge",+    "datasheet": "https://www.silabs.com/documents/public/data-sheets/cp2104.pdf",+    "parts": {+      "symbol": "cp2104.kicad_sym",+      "footprint": "cp2104.kicad_mod",+      "model_3d": "cp2104.glb",+      "model_3d_step": "cp2104.step",+      "lbr": "cp2104.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "RI",+        "type": "input",+        "description": "Ring Indicator control input (active low). Modem-status handshake line."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference. Must be tied to ground."+      },+      {+        "number": "3",+        "name": "D+",+        "type": "bidirectional",+        "description": "USB D+ full-speed (12 Mbps) differential data line. Connect to the USB connector D+ pin."+      },+      {+        "number": "4",+        "name": "D-",+        "type": "bidirectional",+        "description": "USB D- full-speed (12 Mbps) differential data line. Connect to the USB connector D- pin."+      },+      {+        "number": "5",+        "name": "VIO",+        "type": "power_in",+        "description": "I/O supply voltage input. Sets digital I/O rail from 1.8 V up to VDD. Decouple to GND."+      },+      {+        "number": "6",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital core supply (3.0 to 3.6 V). Also the output of the on-chip 3.45 V voltage regulator when REGIN is driven from VBUS (self- or USB-powered). Decouple to GND."+      },+      {+        "number": "7",+        "name": "REGIN",+        "type": "power_in",+        "description": "5 V regulator input (3.0 to 5.25 V). Input to the on-chip 3.45 V LDO whose output appears on VDD. Typically tied to VBUS."+      },+      {+        "number": "8",+        "name": "VBUS",+        "type": "input",+        "description": "VBUS sense input. Connect to the VBUS signal of the USB connector so the device can detect bus attach (2.5 V threshold)."+      },+      {+        "number": "9",+        "name": "RST",+        "type": "bidirectional",+        "description": "Device reset (active low). Open-drain output of internal POR / VDD monitor; may also be driven low externally for at least 15 us to initiate a system reset."+      },+      {+        "number": "10",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect. Leave floating or tie to VIO."+      },+      {+        "number": "11",+        "name": "GPIO.3",+        "type": "bidirectional",+        "description": "User-configurable digital I/O. Supply is VIO (1.8 V to VDD). May be left unconnected when unused."+      },+      {+        "number": "12",+        "name": "GPIO.2",+        "type": "bidirectional",+        "description": "User-configurable digital I/O; optional RS-485 transceiver bus-control output (Section 7.2). Supply is VIO."+      },+      {+        "number": "13",+        "name": "GPIO.1",+        "type": "bidirectional",+        "description": "User-configurable digital I/O; optional receive-toggle output (Section 7.1). Supply is VIO."+      },+      {+        "number": "14",+        "name": "GPIO.0",+        "type": "bidirectional",+        "description": "User-configurable digital I/O; optional transmit-toggle output (Section 7.1). Supply is VIO."+      },+      {+        "number": "15",+        "name": "SUSPEND",+        "type": "output",+        "description": "Active-low USB suspend indicator. Driven low while the CP2104 is in the USB Suspend state."+      },+      {+        "number": "16",+        "name": "VPP",+        "type": "passive",+        "description": "OTP ROM programming supply pin. Connect a 4.7 uF capacitor between this pin and ground to support ROM programming via the USB interface. During programming VPP is 5.75 V to VIO+3.6 V."+      },+      {+        "number": "17",+        "name": "SUSPEND",+        "type": "output",+        "description": "Active-high USB suspend indicator. Driven high while the CP2104 is in the USB Suspend state."+      },+      {+        "number": "18",+        "name": "CTS",+        "type": "input",+        "description": "Clear-To-Send hardware flow-control input (active low). Modem handshake line."+      },+      {+        "number": "19",+        "name": "RTS",+        "type": "output",+        "description": "Request-To-Send hardware flow-control output (active low). Modem handshake line."+      },+      {+        "number": "20",+        "name": "RXD",+        "type": "input",+        "description": "Asynchronous UART receive data input. Data rates 300 bps to 2 Mbps; 5/6/7/8 data bits; 1/1.5/2 stop bits; odd/even/mark/space/no parity."+      },+      {+        "number": "21",+        "name": "TXD",+        "type": "output",+        "description": "Asynchronous UART transmit data output. Data rates 300 bps to 2 Mbps; 5/6/7/8 data bits; 1/1.5/2 stop bits; odd/even/mark/space/no parity."+      },+      {+        "number": "22",+        "name": "DSR",+        "type": "input",+        "description": "Data-Set-Ready modem control input (active low)."+      },+      {+        "number": "23",+        "name": "DTR",+        "type": "output",+        "description": "Data-Terminal-Ready modem control output (active low)."+      },+      {+        "number": "24",+        "name": "DCD",+        "type": "input",+        "description": "Data-Carrier-Detect modem control input (active low)."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.silabs.com/documents/public/data-sheets/cp2104.pdf",+        "pages": 22,+        "sha256": "9569257991f26467",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 24,+        "described": 24,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Type": "USB-to-UART bridge",+      "USB": "USB 2.0 full-speed",+      "UART data rate": "300 bps to 2 Mbps",+      "GPIO": "4 configurable",+      "Integrated": "Oscillator, regulator, EEPROM",+      "Supply": "VBUS or self-powered (3.0-3.6 V core)",+      "Package": "QFN-24 (4x4 mm)"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "cp2104",+    "usb to uart bridge",+    "usb serial chip",+    "virtual com port ic"+  ],+  "discovery_pitch": "Silicon Labs CP2104 USB-to-UART bridge (QFN-24) with datasheet-verified pinout, KiCad symbol/footprint/3D, and full provenance.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -29,10 +244,5 @@     "docs/cp2104-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file