component
COS3525AP
Public Made by Adomby adom
COSINE AC-DC Controllers and Regulators, SOP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+12−9@@ -50,37 +50,37 @@ "number": "4", "name": "OSC Output", "type": "output",- "description": "Oscillator output. Provides a clock signal (typically ~4V amplitude, 0.5\u00b5s width) used to synchronize additional slave devices."+ "description": "Oscillator output. Provides a clock signal (typically ~4V amplitude, 0.5µs width) used to synchronize additional slave devices." }, { "number": "5", "name": "CT", "type": "passive",- "description": "Timing capacitor connection pin for oscillator frequency programming (recommended 0.001-0.01 \u00b5F). Should be connected to device ground using minimal trace length."+ "description": "Timing capacitor connection pin for oscillator frequency programming (recommended 0.001-0.01 µF). Should be connected to device ground using minimal trace length." }, { "number": "6", "name": "RT", "type": "passive",- "description": "Timing resistor connection pin for oscillator frequency programming. Recommended range 2-150 k\u03a9. Sets oscillator charging current together with CT."+ "description": "Timing resistor connection pin for oscillator frequency programming. Recommended range 2-150 kΩ. Sets oscillator charging current together with CT." }, { "number": "7", "name": "Discharge", "type": "passive",- "description": "Discharge terminal. A single resistor (0-500 \u03a9) between CT and Discharge provides adjustable dead-time control between the two outputs."+ "description": "Discharge terminal. A single resistor (0-500 Ω) between CT and Discharge provides adjustable dead-time control between the two outputs." }, { "number": "8", "name": "Soft Start", "type": "passive",- "description": "Soft-start input pin. Connect an external capacitor to ground; it is charged by an internal 50 \u00b5A current source to slowly ramp up the duty cycle at startup."+ "description": "Soft-start input pin. Connect an external capacitor to ground; it is charged by an internal 50 µA current source to slowly ramp up the duty cycle at startup." }, { "number": "9", "name": "Compensation", "type": "output",- "description": "Output of the error amplifier, used for external loop compensation network attachment. Also can be pulled down (sinking \u2265100 \u00b5A) to disable the outputs."+ "description": "Output of the error amplifier, used for external loop compensation network attachment. Also can be pulled down (sinking ≥100 µA) to disable the outputs." }, { "number": "10",@@ -104,7 +104,7 @@ "number": "13", "name": "VC", "type": "power_in",- "description": "Collector supply for the output driver stage (4.5V to 40V operating). Should be bypassed with a 0.1 \u00b5F low-ESL ceramic capacitor placed with minimal trace length."+ "description": "Collector supply for the output driver stage (4.5V to 40V operating). Should be bypassed with a 0.1 µF low-ESL ceramic capacitor placed with minimal trace length." }, { "number": "14",@@ -122,7 +122,7 @@ "number": "16", "name": "VREF", "type": "power_out",- "description": "5.1V reference output (trimmed to 1%, load capability up to 20 mA). Bypass with a 0.1 \u00b5F low-ESL ceramic capacitor with a minimal trace to the ground plane."+ "description": "5.1V reference output (trimmed to 1%, load capability up to 20 mA). Bypass with a 0.1 µF low-ESL ceramic capacitor with a minimal trace to the ground plane." } ], "provenance": {@@ -186,5 +186,8 @@ "docs/cos3525ap-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }