cos2172sra

@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "COS2172SRA",+    "manufacturer": "COSINE",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "Operational Amplifier",+    "parts": {+      "symbol": "cos2172sra.kicad_sym",+      "footprint": "cos2172sra.kicad_mod",+      "model_3d": "cos2172sra-etched.glb",+      "model_3d_plain": "cos2172sra.glb",+      "model_3d_step": "cos2172sra-etched.step",+      "model_3d_step_plain": "cos2172sra.step",+      "lbr": "cos2172sra.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "OUT1",+        "type": "output",+        "description": "Output of amplifier A. Output voltage swing extends to within ~500mV of each supply rail (RRIO) with sourcing capability of +40mA and sinking of -48mA short-circuit current."+      },+      {+        "number": "2",+        "name": "-IN1",+        "type": "input",+        "description": "Inverting input of amplifier A. Voltage range of this pin can go from -Vs -0.3V to +Vs + 0.3V. Input terminals are diode-clamped to the power-supply rails; limit current to ±10mA if signal exceeds the rails by 0.5V."+      },+      {+        "number": "3",+        "name": "+IN1",+        "type": "input",+        "description": "Non-inverting input of amplifier A. Same voltage range as -IN1 (-Vs -0.3V to +Vs +0.3V). Rail-to-rail input; common-mode range spans V-S -0.1V to V+S -2V per the electrical characteristics."+      },+      {+        "number": "4",+        "name": "-Vs",+        "type": "power_in",+        "description": "Negative power supply or ground. For single-supply operation tie to GND; for dual-supply operation tie to the negative rail (down to -20V). Bypass with a 0.1µF ceramic capacitor placed close to the pin if not connected directly to ground."+      },+      {+        "number": "5",+        "name": "+IN2",+        "type": "input",+        "description": "Non-inverting input of amplifier B. Same voltage range as -IN2 (-Vs -0.3V to +Vs +0.3V). Rail-to-rail input capability."+      },+      {+        "number": "6",+        "name": "-IN2",+        "type": "input",+        "description": "Inverting input of amplifier B. Voltage range from -Vs -0.3V to +Vs +0.3V. Input terminals are diode-clamped to the supply rails."+      },+      {+        "number": "7",+        "name": "OUT2",+        "type": "output",+        "description": "Output of amplifier B. Rail-to-rail output that swings to within ~500mV of each supply rail with a 10kΩ load at Vs=40V."+      },+      {+        "number": "8",+        "name": "+Vs",+        "type": "power_in",+        "description": "Positive power supply, 4.5V to 40V single-supply (or up to +20V in dual-supply operation). Quiescent current is 1.2mA per amplifier. Bypass with a 0.1µF ceramic capacitor placed as close to the pin as possible; a 2.2µF tantalum capacitor may be added for better performance."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}