Codex

@@ -6,13 +6,21 @@ These videos document the progression of Codex Astra driving Autodesk Fusion thr  The BQ25792 comparison disables one inherited all-object same-net spacing rule on diagnostic copies because it conflicts with intended same-net connections. Other clearance rules remain enabled and the source is preserved. Native DRC verifies the encoded rules; it does not certify power, thermal, signal-integrity or insulation safety. -## Start here: the two-minute Astra progression+## Latest team overview: released routing, verified checks++This newly narrated short reel follows the progression from simple routing to the BQ25792 board, retained copper, thermal planning, expanded pours and bottleneck rerouting. Historical native Fusion footage retains its 10× action labels and inspection holds. The updated ending reflects the independent release checks: six-net per-trace routing completed in 55.1 seconds on 1.10.2; the saved fixture then passed the corrected, unmodified InstaPCB 2L profile with zero errors, warnings or airwires on 1.10.5, and explicit net highlighting was visually verified.++<video width="100%" controls playsinline preload="metadata" src="https://wiki.adom.inc/api/pages/adom/codex/files/videos/fusion/00-fusion-astra-team-final.mp4"></video>++These fixture checks do not certify the full BQ design, thermal power ratings or automatic Hydrogen prompt delivery. General routing and copper-engineering skills belong to Fusion Bridge; the worked boards and recording scripts are optional examples. Select Codex and Astra in Hydrogen and manually paste the [reproduction prompt](https://wiki.adom.inc/adom/codex/files/docs/REPRODUCE-FUSION.md). [Highlight fix and retest](https://wiki.adom.inc/adom/fusion-bridge/issues/81) · [InstaPCB rule fix and retest](https://wiki.adom.inc/adom/fusion-bridge/issues/82).++## Earlier two-minute progression overview  From six simple nets to crossover routing, obstacles and the real BQ25792 board, this narrated highlight reel follows each new engineering objective: retain copper for ablation, clean up route angles, reserve thermal copper, expand heatsinks, then reroute traces that obstruct heat spreading. Astra calculated the plans; Adom Bridge executed visible native Fusion edits. The footage shows selected action at **10×**, with waits removed and explicitly labeled inspection holds and analysis graphics.  <video width="100%" controls playsinline preload="metadata" src="https://wiki.adom.inc/api/pages/adom/codex/files/videos/fusion/00-fusion-astra-progression-highlights.mp4"></video> -**2:03, newly narrated.** The ending explains the Hydrogen → Codex → Astra workflow and manufacturer selection. **The routing changes are merged and released in Fusion Bridge 1.10.0 insiders. Team rollout is pending native installed-release acceptance; the bounded test on arav-rog is currently blocked by Autodesk sign-in.** These are historical development recordings, not footage of the installed-release acceptance test. Thermal figures are model comparisons; diagnostic DRC results are not full manufacturer-rule certification. Watch the individual videos below for the details and limitations.+**2:03, newly narrated.** The ending explains the Hydrogen → Codex → Astra workflow and manufacturer selection. **Historical ending:** this older cut predates the passing release checks described above; its pending-sign-in wording is obsolete. These are historical development recordings, not footage of the installed-release acceptance test. Thermal figures are model comparisons; diagnostic DRC results are not full manufacturer-rule certification. Watch the individual videos below for the details and limitations.  [Reproduction guide](https://wiki.adom.inc/adom/codex/files/docs/REPRODUCE-FUSION.md) · [Download highlight reel](https://wiki.adom.inc/api/pages/adom/codex/files/videos/fusion/00-fusion-astra-progression-highlights.mp4) 

⋯ 1 unchanged line ⋯