component
CN3163
Public Made by Adomby adom
ShangHai Consonance Elec Battery Management, ESOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+10−7@@ -38,7 +38,7 @@ "number": "2", "name": "ISET", "type": "passive",- "description": "Constant-current charge programming and charge-current monitor. Connect an external resistor R_ISET from ISET to GND to program the charge current. V(ISET) = 0.12 V in trickle mode and 1.205 V in constant-current mode. Charge current can be monitored as I_CH = (V_ISET \u00d7 986) / R_ISET."+ "description": "Constant-current charge programming and charge-current monitor. Connect an external resistor R_ISET from ISET to GND to program the charge current. V(ISET) = 0.12 V in trickle mode and 1.205 V in constant-current mode. Charge current can be monitored as I_CH = (V_ISET × 986) / R_ISET." }, { "number": "3",@@ -50,31 +50,31 @@ "number": "4", "name": "VIN", "type": "power_in",- "description": "Positive supply input, 4.4 V to 6 V. Powers internal circuitry. When V(VIN) \u2212 V(BAT) < 10 mV the chip enters low-power sleep mode with BAT pin current < 3 \u03bcA."+ "description": "Positive supply input, 4.4 V to 6 V. Powers internal circuitry. When V(VIN) − V(BAT) < 10 mV the chip enters low-power sleep mode with BAT pin current < 3 μA." }, { "number": "5", "name": "BAT", "type": "power_out",- "description": "Battery connection. Connect to the positive terminal of the Li-ion cell. Sources the charge current and constant-voltage charge voltage; draws < 3 \u03bcA in UVLO or sleep mode."+ "description": "Battery connection. Connect to the positive terminal of the Li-ion cell. Sources the charge current and constant-voltage charge voltage; draws < 3 μA in UVLO or sleep mode." }, { "number": "6", "name": "DONE", "type": "output",- "description": "Open-drain end-of-charge status output (active-low). Pulled low by an internal switch when charging has terminated; otherwise high-impedance. Sink capability 10 mA at V_DONE = 0.3 V; leakage < 1 \u03bcA at 6 V."+ "description": "Open-drain end-of-charge status output (active-low). Pulled low by an internal switch when charging has terminated; otherwise high-impedance. Sink capability 10 mA at V_DONE = 0.3 V; leakage < 1 μA at 6 V." }, { "number": "7", "name": "CHRG", "type": "output",- "description": "Open-drain charge-in-progress status output (active-low). Pulled low by an internal switch while charging is active; otherwise high-impedance. Sink capability 10 mA at V_CHRG = 0.3 V; leakage < 1 \u03bcA at 6 V."+ "description": "Open-drain charge-in-progress status output (active-low). Pulled low by an internal switch while charging is active; otherwise high-impedance. Sink capability 10 mA at V_CHRG = 0.3 V; leakage < 1 μA at 6 V." }, { "number": "8", "name": "FB", "type": "input",- "description": "Battery voltage sense (feedback) input. Sense the battery positive terminal here to eliminate errors from wire/contact resistance between BAT pin and the cell. An external resistor between FB and BAT can be used to raise the constant-voltage charge voltage per V_REG = 4.2 + 3.707e-6 \u00d7 Rx."+ "description": "Battery voltage sense (feedback) input. Sense the battery positive terminal here to eliminate errors from wire/contact resistance between BAT pin and the cell. An external resistor between FB and BAT can be used to raise the constant-voltage charge voltage per V_REG = 4.2 + 3.707e-6 × Rx." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/cn3163-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }