CN1185

@@ -0,0 +1,52 @@+# CN1185++**ShangHai Consonance Elec** · Supervisor and Reset ICs · TSSOP-16++CN1185 from ShangHai Consonance Elec, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN1 | input | Comparator 1 negative input. Connect directly to the monitored voltage or via an external resistor divider to set the trip threshold. Typical trip threshold 1.22V or 1.256V depending on CHRG. |+| 2 | OUT1 | output | Comparator 1 open-drain output. Pulls low (internal NMOS to GND) when IN1 rises above the upper trip threshold; goes high-impedance when IN1 falls below the lower trip threshold. Pull-down current ≥10mA at OUTx=0.3V. |+| 3 | IN2 | input | Comparator 2 negative input. Connect directly to the monitored voltage or via an external resistor divider to set the trip threshold. |+| 4 | OUT2 | output | Comparator 2 open-drain output. Pulls low when IN2 rises above the upper trip threshold; high-impedance when IN2 falls below the lower trip threshold. |+| 5 | IN3 | input | Comparator 3 negative input. Connect directly to the monitored voltage or via an external resistor divider to set the trip threshold. |+| 6 | OUT3 | output | Comparator 3 open-drain output. Pulls low when IN3 rises above the upper trip threshold; high-impedance when IN3 falls below the lower trip threshold. |+| 7 | IN4 | input | Comparator 4 negative input. Connect directly to the monitored voltage or via an external resistor divider to set the trip threshold. |+| 8 | OUT4 | output | Comparator 4 open-drain output. Pulls low when IN4 rises above the upper trip threshold; high-impedance when IN4 falls below the lower trip threshold. |+| 9 | CHRG | input | Comparator trip-threshold control logic input. High: falling trip threshold typ 1.22V. Low: falling trip threshold typ 1.256V (≈3% higher, for charge-state compensation). Affects all four comparators simultaneously. |+| 10 | NC | unconnected | No connection. |+| 11 | HYS1 | input | Comparator hysteresis setting logic input (LSB). Together with HYS2 selects hysteresis of 1%, 3%, 6%, or 10% of the falling trip threshold. VIL≤0.6V, VIH≥0.7×VDD. |+| 12 | HYS2 | input | Comparator hysteresis setting logic input (MSB). Together with HYS1 selects hysteresis of 1%, 3%, 6%, or 10% of the falling trip threshold. VIL≤0.6V, VIH≥0.7×VDD. |+| 13 | GND | power_in | Negative supply / ground reference. |+| 14 | BLINK | input | Blink control logic input. When a comparator output is low, CHRG=low, and BLINK=high, that output toggles at ~2Hz (50% duty, ~500ms per state) - used to indicate charging in progress via the LED indicator. |+| 15 | NC | unconnected | No connection. |+| 16 | VDD | power_in | Positive supply input, 2.7V to 6V operating range (absolute max 6.5V). Typical supply current 7.3µA at VDD=3.7V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | ShangHai Consonance Elec |+| Package | TSSOP-16 |+| Category | PMIC |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `CN1185`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [ShangHai Consonance Elec datasheet](docs/cn1185-datasheet.pdf) (10 pp, sha256 `aeec55518128be10`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/cn1185-datasheet.pdf)

@@ -0,0 +1,34 @@+{+  "slug": "cn1185",+  "version": "0.1.0",+  "type": "component",+  "description": "ShangHai Consonance Elec Supervisor and Reset ICs, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "cn1185"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "cn1185.kicad_sym",+    "cn1185.kicad_mod",+    "cn1185.glb",+    "cn1185.step",+    "cn1185.lbr",+    "docs/hero.png",+    "docs/cn1185-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file