component
CKS32F103C8T6
Public Made by Adomby adom
CKS Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+356−8@@ -1,13 +1,366 @@ {+ "schema_version": 1,+ "type": "component", "slug": "cks32f103c8t6",+ "title": "CKS32F103C8T6",+ "brief": "CKS Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "CKS Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "mcu", "cks32f103c8t6" ],+ "component": {+ "mpn": "CKS32F103C8T6",+ "manufacturer": "CKS",+ "package": "LQFP-48(7x7)",+ "pin_count": 48,+ "category": "MCU",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/3bd433b372f264e764f10d3ec1014e26.pdf",+ "parts": {+ "symbol": "cks32f103c8t6.kicad_sym",+ "footprint": "cks32f103c8t6.kicad_mod",+ "model_3d": "cks32f103c8t6.glb",+ "model_3d_step": "cks32f103c8t6.step",+ "lbr": "cks32f103c8t6.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup battery input, 1.8-3.6 V. Powers RTC, LSE 32 kHz oscillator and backup registers when VDD is absent."+ },+ {+ "number": "2",+ "name": "PC13-TAMPER-RTC",+ "type": "bidirectional",+ "description": "GPIO PC13; alt: TAMPER input, RTC alarm/second output. Supplied by the backup power switch - output limited to 2 MHz / 30 pF load and cannot source current (e.g. LED)."+ },+ {+ "number": "3",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "GPIO PC14; alt: LSE 32.768 kHz crystal input (OSC32_IN). Backup-domain pin with the same drive limits as PC13."+ },+ {+ "number": "4",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "GPIO PC15; alt: LSE 32.768 kHz crystal output (OSC32_OUT). Backup-domain pin with the same drive limits as PC13."+ },+ {+ "number": "5",+ "name": "OSC_IN",+ "type": "input",+ "description": "HSE main crystal oscillator input (default after reset). Can be remapped to GPIO PD0 by software."+ },+ {+ "number": "6",+ "name": "OSC_OUT",+ "type": "output",+ "description": "HSE main crystal oscillator output (default after reset). Can be remapped to GPIO PD1 by software."+ },+ {+ "number": "7",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Active-low bidirectional reset. Driven low by internal power-on/PVD reset sources; can also be pulled low externally to reset the MCU."+ },+ {+ "number": "8",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground reference for ADC, PLL, RC oscillators and reset block. Must be tied to VSS."+ },+ {+ "number": "9",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog supply, 2.0-3.6 V (\u22652.4 V when ADC is used). Powers ADC, reset, RC oscillator and PLL analog sections."+ },+ {+ "number": "10",+ "name": "PA0-WKUP",+ "type": "bidirectional",+ "description": "GPIO PA0; alt: WKUP wake-up, USART2_CTS, ADC12_IN0, TIM2_CH1_ETR."+ },+ {+ "number": "11",+ "name": "PA1",+ "type": "bidirectional",+ "description": "GPIO PA1; alt: USART2_RTS, ADC12_IN1, TIM2_CH2."+ },+ {+ "number": "12",+ "name": "PA2",+ "type": "bidirectional",+ "description": "GPIO PA2; alt: USART2_TX, ADC12_IN2, TIM2_CH3."+ },+ {+ "number": "13",+ "name": "PA3",+ "type": "bidirectional",+ "description": "GPIO PA3; alt: USART2_RX, ADC12_IN3, TIM2_CH4."+ },+ {+ "number": "14",+ "name": "PA4",+ "type": "bidirectional",+ "description": "GPIO PA4; alt: SPI1_NSS, USART2_CK, ADC12_IN4."+ },+ {+ "number": "15",+ "name": "PA5",+ "type": "bidirectional",+ "description": "GPIO PA5; alt: SPI1_SCK, ADC12_IN5."+ },+ {+ "number": "16",+ "name": "PA6",+ "type": "bidirectional",+ "description": "GPIO PA6; alt: SPI1_MISO, ADC12_IN6, TIM3_CH1, TIM1_BKIN."+ },+ {+ "number": "17",+ "name": "PA7",+ "type": "bidirectional",+ "description": "GPIO PA7; alt: SPI1_MOSI, ADC12_IN7, TIM3_CH2, TIM1_CH1N."+ },+ {+ "number": "18",+ "name": "PB0",+ "type": "bidirectional",+ "description": "GPIO PB0; alt: ADC12_IN8, TIM3_CH3, TIM1_CH2N."+ },+ {+ "number": "19",+ "name": "PB1",+ "type": "bidirectional",+ "description": "GPIO PB1; alt: ADC12_IN9, TIM3_CH4, TIM1_CH3N."+ },+ {+ "number": "20",+ "name": "PB2/BOOT1",+ "type": "bidirectional",+ "description": "GPIO PB2, 5 V tolerant. Also samples BOOT1 at reset (with BOOT0) to select the boot memory (main flash / system memory / SRAM)."+ },+ {+ "number": "21",+ "name": "PB10",+ "type": "bidirectional",+ "description": "GPIO PB10, 5 V tolerant; alt: I2C2_SCL, USART3_TX, TIM2_CH3."+ },+ {+ "number": "22",+ "name": "PB11",+ "type": "bidirectional",+ "description": "GPIO PB11, 5 V tolerant; alt: I2C2_SDA, USART3_RX, TIM2_CH4."+ },+ {+ "number": "23",+ "name": "VSS_1",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "24",+ "name": "VDD_1",+ "type": "power_in",+ "description": "Digital supply, 2.0-3.6 V. Powers internal regulator and I/O."+ },+ {+ "number": "25",+ "name": "PB12",+ "type": "bidirectional",+ "description": "GPIO PB12, 5 V tolerant; alt: SPI2_NSS, I2C2_SMBA, USART3_CK, TIM1_BKIN."+ },+ {+ "number": "26",+ "name": "PB13",+ "type": "bidirectional",+ "description": "GPIO PB13, 5 V tolerant; alt: SPI2_SCK, USART3_CTS, TIM1_CH1N."+ },+ {+ "number": "27",+ "name": "PB14",+ "type": "bidirectional",+ "description": "GPIO PB14, 5 V tolerant; alt: SPI2_MISO, USART3_RTS, TIM1_CH2N."+ },+ {+ "number": "28",+ "name": "PB15",+ "type": "bidirectional",+ "description": "GPIO PB15, 5 V tolerant; alt: SPI2_MOSI, TIM1_CH3N."+ },+ {+ "number": "29",+ "name": "PA8",+ "type": "bidirectional",+ "description": "GPIO PA8, 5 V tolerant; alt: USART1_CK, TIM1_CH1, MCO (master clock output)."+ },+ {+ "number": "30",+ "name": "PA9",+ "type": "bidirectional",+ "description": "GPIO PA9, 5 V tolerant; alt: USART1_TX, TIM1_CH2."+ },+ {+ "number": "31",+ "name": "PA10",+ "type": "bidirectional",+ "description": "GPIO PA10, 5 V tolerant; alt: USART1_RX, TIM1_CH3."+ },+ {+ "number": "32",+ "name": "PA11",+ "type": "bidirectional",+ "description": "GPIO PA11, 5 V tolerant; alt: USART1_CTS, USBDM, CAN_RX, TIM1_CH4."+ },+ {+ "number": "33",+ "name": "PA12",+ "type": "bidirectional",+ "description": "GPIO PA12, 5 V tolerant; alt: USART1_RTS, USBDP, CAN_TX, TIM1_ETR."+ },+ {+ "number": "34",+ "name": "PA13",+ "type": "bidirectional",+ "description": "JTMS/SWDIO after reset (default). Can be reassigned as GPIO PA13 by disabling JTAG/SWD debug via AFIO."+ },+ {+ "number": "35",+ "name": "VSS_2",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "36",+ "name": "VDD_2",+ "type": "power_in",+ "description": "Digital supply, 2.0-3.6 V."+ },+ {+ "number": "37",+ "name": "PA14",+ "type": "bidirectional",+ "description": "JTCK/SWCLK after reset (default). Can be reassigned as GPIO PA14 by disabling JTAG/SWD via AFIO."+ },+ {+ "number": "38",+ "name": "PA15",+ "type": "bidirectional",+ "description": "JTDI after reset (default). Can be released to GPIO PA15 (also TIM2_CH1_ETR, SPI1_NSS) by disabling JTAG via AFIO."+ },+ {+ "number": "39",+ "name": "PB3",+ "type": "bidirectional",+ "description": "JTDO after reset (default). Can be released to GPIO PB3 (also TRACESWO, TIM2_CH2, SPI1_SCK) by disabling JTAG via AFIO."+ },+ {+ "number": "40",+ "name": "PB4",+ "type": "bidirectional",+ "description": "JNTRST after reset (default). Can be released to GPIO PB4 (also TIM3_CH1, SPI1_MISO) by disabling JTAG via AFIO."+ },+ {+ "number": "41",+ "name": "PB5",+ "type": "bidirectional",+ "description": "GPIO PB5 (not 5 V tolerant); alt: I2C1_SMBA, TIM3_CH2, SPI1_MOSI."+ },+ {+ "number": "42",+ "name": "PB6",+ "type": "bidirectional",+ "description": "GPIO PB6, 5 V tolerant; alt: I2C1_SCL, TIM4_CH1, USART1_TX."+ },+ {+ "number": "43",+ "name": "PB7",+ "type": "bidirectional",+ "description": "GPIO PB7, 5 V tolerant; alt: I2C1_SDA, TIM4_CH2, USART1_RX."+ },+ {+ "number": "44",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot mode select strap, sampled at reset. Together with BOOT1 (PB2) selects between main flash, system memory (bootloader) and embedded SRAM."+ },+ {+ "number": "45",+ "name": "PB8",+ "type": "bidirectional",+ "description": "GPIO PB8, 5 V tolerant; alt: I2C1_SCL (remap), TIM4_CH3, CAN_RX (remap)."+ },+ {+ "number": "46",+ "name": "PB9",+ "type": "bidirectional",+ "description": "GPIO PB9, 5 V tolerant; alt: I2C1_SDA (remap), TIM4_CH4, CAN_TX (remap)."+ },+ {+ "number": "47",+ "name": "VSS_3",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "48",+ "name": "VDD_3",+ "type": "power_in",+ "description": "Digital supply, 2.0-3.6 V."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/3bd433b372f264e764f10d3ec1014e26.pdf",+ "pages": 64,+ "sha256": "221001e6207f4f99",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 48,+ "described": 48,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "CKS",+ "Package": "LQFP-48(7x7)",+ "Category": "MCU",+ "Pins": "48"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "cks32f103c8t6"+ ],+ "discovery_pitch": "CKS32F103C8T6 (CKS) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +378,5 @@ "docs/cks32f103c8t6-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }