component
CJ6101B33M
Public Made by Adomby adom
Changjing Voltage Reference, SOT-23-5L. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -32,7 +32,7 @@ "number": "1", "name": "VIN", "type": "power_in",- "description": "Unregulated power input, 1.8 V to 8 V (abs max 9 V). Bypass to VSS with a 1 \u00b5F ceramic capacitor close to the pin; a small series resistor (~3 \u03a9) may be added with an X5R ceramic to damp start-up transients."+ "description": "Unregulated power input, 1.8 V to 8 V (abs max 9 V). Bypass to VSS with a 1 µF ceramic capacitor close to the pin; a small series resistor (~3 Ω) may be added with an X5R ceramic to damp start-up transients." }, { "number": "2",@@ -44,7 +44,7 @@ "number": "3", "name": "CE", "type": "input",- "description": "Chip-enable logic input. On the 'B' option (CJ6101B) it is active-high with an internal pull-down resistor to VSS and an internal output-discharge resistor on VOUT, so leaving CE open keeps the regulator off. VCE(H) \u2265 1.5 V (up to VIN) enables the regulator; VCE(L) \u2264 0.3 V disables it (standby current \u2248 0.1 \u00b5A)."+ "description": "Chip-enable logic input. On the 'B' option (CJ6101B) it is active-high with an internal pull-down resistor to VSS and an internal output-discharge resistor on VOUT, so leaving CE open keeps the regulator off. VCE(H) ≥ 1.5 V (up to VIN) enables the regulator; VCE(L) ≤ 0.3 V disables it (standby current ≈ 0.1 µA)." }, { "number": "4",@@ -56,7 +56,7 @@ "number": "5", "name": "VOUT", "type": "power_out",- "description": "Regulated 3.3 V output, up to 300 mA continuous (600 mA absolute-max). Requires a 1 \u00b5F ceramic (or tantalum) capacitor to VSS close to the pin for loop stability; typical dropout is 110 mV at 100 mA and output noise \u2248 27 \u00d7 VOUT \u00b5VRMS (10 Hz-100 kHz)."+ "description": "Regulated 3.3 V output, up to 300 mA continuous (600 mA absolute-max). Requires a 1 µF ceramic (or tantalum) capacitor to VSS close to the pin for loop stability; typical dropout is 110 mV at 100 mA and output noise ≈ 27 × VOUT µVRMS (10 Hz-100 kHz)." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/cj6101b33m-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }