cj6101b18m

@@ -33,5 +33,60 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "CJ6101B18M",+    "manufacturer": "Changjing",+    "package": "SOT-23-5L",+    "pin_count": 5,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "parts": {+      "symbol": "cj6101b18m.kicad_sym",+      "footprint": "cj6101b18m.kicad_mod",+      "model_3d": "cj6101b18m-etched.glb",+      "model_3d_plain": "cj6101b18m.glb",+      "model_3d_step": "cj6101b18m-etched.step",+      "model_3d_step_plain": "cj6101b18m.step",+      "lbr": "cj6101b18m.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VIN",+        "type": "power_in",+        "description": "Unregulated positive supply input. Operating range 1.8 V to 8 V (abs-max -0.3 V to +9 V). Bypass with a 1 μF ceramic or tantalum capacitor close to the pin; series 3 Ω recommended with X5R MLCC to damp start-up transients."+      },+      {+        "number": "2",+        "name": "VSS",+        "type": "power_in",+        "description": "Device ground / signal return. All voltages in the datasheet are referenced to this pin. Tie directly to the ground plane and to the negative terminal of CIN and COUT."+      },+      {+        "number": "3",+        "name": "CE",+        "type": "input",+        "description": "Chip Enable, active-high on the 'B'-designator variant (VCE_H ≥ 1.5 V, VCE_L ≤ 0.3 V). 'B' option integrates a CE pull-down resistor so the pin defaults to disabled if left floating; drive high to enable the regulator. Standby current with CE=VSS is 0.1 μA typ."+      },+      {+        "number": "4",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to VSS for best PCB stability; do not use as a routing via."+      },+      {+        "number": "5",+        "name": "VOUT",+        "type": "power_out",+        "description": "Regulated output, factory-trimmed to 1.8 V on this MPN (accuracy ±2 % / ±1 % typ.). Delivers up to 300 mA continuous; current limit 550-850 mA (typ 700 mA). Requires a ≥1 μF output capacitor to VSS for loop stability; ceramic COUT improves transient response."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}