← Commit history

ch450h: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·31d32b8a0b · ·parent 496f931
2 files changed +104−24
package.json+62−22
@@ -65,121 +65,121 @@         "number": "1",         "name": "DIG3",         "type": "output",-        "description": "Digit-3 cathode drive output for 7-segment display, active-low; doubles as keyboard column-scan output active-high; VOL \u22640.8 V at 80 mA sink, max continuous per-pin current 120 mA."+        "description": "Digit-3 cathode drive output for 7-segment display, active-low; doubles as keyboard column-scan output active-high; VOL ≤0.8 V at 80 mA sink, max continuous per-pin current 120 mA."       },       {         "number": "2",         "name": "DIG4",         "type": "output",-        "description": "Digit-4 cathode drive output for 7-segment display, active-low; doubles as keyboard column-scan output active-high; VOL \u22640.8 V at 80 mA sink, VOH \u22654.5 V at 8 mA."+        "description": "Digit-4 cathode drive output for 7-segment display, active-low; doubles as keyboard column-scan output active-high; VOL ≤0.8 V at 80 mA sink, VOH ≥4.5 V at 8 mA."       },       {         "number": "3",         "name": "SCL",         "type": "input",-        "description": "2-wire serial clock input; internal pull-up 100-300 \u00b5A; data sampled on rising edge; VIL \u22640.8 V, VIH \u22652.0 V; clock rate 0-2 MHz."+        "description": "2-wire serial clock input; internal pull-up 100-300 µA; data sampled on rising edge; VIL ≤0.8 V, VIH ≥2.0 V; clock rate 0-2 MHz."       },       {         "number": "4",         "name": "SDA",         "type": "bidirectional",-        "description": "2-wire serial data input and open-drain output; internal pull-up 250-400 \u00b5A; MSB first; VIL \u22640.8 V, VIH \u22652.0 V; output valid within 30 ns of SCL falling edge."+        "description": "2-wire serial data input and open-drain output; internal pull-up 250-400 µA; MSB first; VIL ≤0.8 V, VIH ≥2.0 V; output valid within 30 ns of SCL falling edge."       },       {         "number": "5",         "name": "GND",         "type": "power_in",-        "description": "Common ground reference; continuous current rating not less than 100 mA; decouple with \u22650.1 \u00b5F ceramic and \u2265100 \u00b5F electrolytic capacitor near VCC-GND pins."+        "description": "Common ground reference; continuous current rating not less than 100 mA; decouple with ≥0.1 µF ceramic and ≥100 µF electrolytic capacitor near VCC-GND pins."       },       {         "number": "6",         "name": "DIG5",         "type": "output",-        "description": "Digit-5 cathode drive output for 7-segment display, active-low; doubles as keyboard column-scan output active-high; VOL \u22640.8 V at 80 mA sink."+        "description": "Digit-5 cathode drive output for 7-segment display, active-low; doubles as keyboard column-scan output active-high; VOL ≤0.8 V at 80 mA sink."       },       {         "number": "7",         "name": "DIG6",         "type": "output",-        "description": "Digit-6 cathode drive output for 7-segment display, active-low; doubles as keyboard column-scan output active-high; VOL \u22640.8 V at 80 mA sink."+        "description": "Digit-6 cathode drive output for 7-segment display, active-low; doubles as keyboard column-scan output active-high; VOL ≤0.8 V at 80 mA sink."       },       {         "number": "8",         "name": "DIG7",         "type": "output",-        "description": "Digit-7 cathode drive output for 7-segment display, active-low; doubles as keyboard column-scan output active-high; VOL \u22640.8 V at 80 mA sink."+        "description": "Digit-7 cathode drive output for 7-segment display, active-low; doubles as keyboard column-scan output active-high; VOL ≤0.8 V at 80 mA sink."       },       {         "number": "9",         "name": "RSTH",         "type": "output",-        "description": "Power-on reset output, active-high; threshold voltage 2.3-2.9 V; reset pulse duration 6-50 ms; VOH \u22654.5 V at 4 mA, VOL \u22640.5 V at 4 mA."+        "description": "Power-on reset output, active-high; threshold voltage 2.3-2.9 V; reset pulse duration 6-50 ms; VOH ≥4.5 V at 4 mA, VOL ≤0.5 V at 4 mA."       },       {         "number": "10",         "name": "SEG0",         "type": "tri_state",-        "description": "Segment-A drive, tri-state output active-high (min 15 mA source, VOH \u22654.5 V at 15 mA, VOL \u22640.5 V at 18 mA); keyboard row-scan input active-high with internal pull-down \u221250 \u00b5A; VILseg \u22640.5 V, VIHseg \u22651.8 V."+        "description": "Segment-A drive, tri-state output active-high (min 15 mA source, VOH ≥4.5 V at 15 mA, VOL ≤0.5 V at 18 mA); keyboard row-scan input active-high with internal pull-down −50 µA; VILseg ≤0.5 V, VIHseg ≥1.8 V."       },       {         "number": "11",         "name": "SEG1",         "type": "tri_state",-        "description": "Segment-B drive, tri-state output active-high (VOH \u22654.5 V at 15 mA, VOL \u22640.5 V at 18 mA); keyboard row-scan input active-high with internal pull-down \u221250 \u00b5A."+        "description": "Segment-B drive, tri-state output active-high (VOH ≥4.5 V at 15 mA, VOL ≤0.5 V at 18 mA); keyboard row-scan input active-high with internal pull-down −50 µA."       },       {         "number": "12",         "name": "VCC",         "type": "power_in",-        "description": "Positive supply voltage 3.0-5.5 V; continuous current not less than 100 mA; max 6.0 V absolute; decouple with \u22650.1 \u00b5F ceramic and \u2265100 \u00b5F electrolytic near pin."+        "description": "Positive supply voltage 3.0-5.5 V; continuous current not less than 100 mA; max 6.0 V absolute; decouple with ≥0.1 µF ceramic and ≥100 µF electrolytic near pin."       },       {         "number": "13",         "name": "SEG2",         "type": "tri_state",-        "description": "Segment-C drive, tri-state output active-high (VOH \u22654.5 V at 15 mA, VOL \u22640.5 V at 18 mA); keyboard row-scan input active-high with internal pull-down \u221250 \u00b5A."+        "description": "Segment-C drive, tri-state output active-high (VOH ≥4.5 V at 15 mA, VOL ≤0.5 V at 18 mA); keyboard row-scan input active-high with internal pull-down −50 µA."       },       {         "number": "14",         "name": "SEG3",         "type": "tri_state",-        "description": "Segment-D drive, tri-state output active-high (VOH \u22654.5 V at 15 mA, VOL \u22640.5 V at 18 mA); keyboard row-scan input active-high with internal pull-down \u221250 \u00b5A; can wake CH450 from sleep when active."+        "description": "Segment-D drive, tri-state output active-high (VOH ≥4.5 V at 15 mA, VOL ≤0.5 V at 18 mA); keyboard row-scan input active-high with internal pull-down −50 µA; can wake CH450 from sleep when active."       },       {         "number": "15",         "name": "SEG4",         "type": "tri_state",-        "description": "Segment-E drive, tri-state output active-high (VOH \u22654.5 V at 15 mA, VOL \u22640.5 V at 18 mA); keyboard row-scan input active-high with internal pull-down \u221250 \u00b5A."+        "description": "Segment-E drive, tri-state output active-high (VOH ≥4.5 V at 15 mA, VOL ≤0.5 V at 18 mA); keyboard row-scan input active-high with internal pull-down −50 µA."       },       {         "number": "16",         "name": "SEG5",         "type": "tri_state",-        "description": "Segment-F drive, tri-state output active-high (VOH \u22654.5 V at 15 mA, VOL \u22640.5 V at 18 mA); keyboard row-scan input active-high with internal pull-down \u221250 \u00b5A."+        "description": "Segment-F drive, tri-state output active-high (VOH ≥4.5 V at 15 mA, VOL ≤0.5 V at 18 mA); keyboard row-scan input active-high with internal pull-down −50 µA."       },       {         "number": "17",         "name": "SEG6",         "type": "tri_state",-        "description": "Segment-G drive, tri-state output active-high (VOH \u22654.5 V at 15 mA, VOL \u22640.5 V at 18 mA); keyboard row-scan input active-high with internal pull-down \u221250 \u00b5A."+        "description": "Segment-G drive, tri-state output active-high (VOH ≥4.5 V at 15 mA, VOL ≤0.5 V at 18 mA); keyboard row-scan input active-high with internal pull-down −50 µA."       },       {         "number": "18",         "name": "SEG7",         "type": "tri_state",-        "description": "Decimal-point segment drive, tri-state output active-high; keyboard row-scan input active-high with internal pull-down \u221250 \u00b5A; max continuous per-pin segment current 25 mA, total all-SEG current 130 mA."+        "description": "Decimal-point segment drive, tri-state output active-high; keyboard row-scan input active-high with internal pull-down −50 µA; max continuous per-pin segment current 25 mA, total all-SEG current 130 mA."       },       {         "number": "19",         "name": "INT#",         "type": "tri_state",-        "description": "Keyboard interrupt output, active-low, open-drain with internal pull-up 500-5000 \u00b5A; asserted when valid keypress detected; deasserted automatically after MCU reads keycode via SDA."+        "description": "Keyboard interrupt output, active-low, open-drain with internal pull-up 500-5000 µA; asserted when valid keypress detected; deasserted automatically after MCU reads keycode via SDA."       },       {         "number": "20",         "name": "DIG2",         "type": "output",-        "description": "Digit-2 cathode drive output for 7-segment display, active-low; doubles as keyboard column-scan output active-high; VOL \u22640.8 V at 80 mA sink, max continuous per-pin current 120 mA."+        "description": "Digit-2 cathode drive output for 7-segment display, active-low; doubles as keyboard column-scan output active-high; VOL ≤0.8 V at 80 mA sink, max continuous per-pin current 120 mA."       }     ],     "provenance": {@@ -214,6 +214,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ch450h.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          10.26,+          12.8,+          2.65+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "ce89141de2ed0b30b2f59ab78a2ebd46a30351a664637e30ee483f07c83bad59",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ch450h-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          10.26,+          12.8,+          2.65+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "cce79db4e5e3ea10a58bd7cfb6485998555781c2f5ec54cee8d1a6d21ee9669a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -199,7 +199,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ch450h.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          10.26,+          12.8,+          2.65+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "ce89141de2ed0b30b2f59ab78a2ebd46a30351a664637e30ee483f07c83bad59",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ch450h-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          10.26,+          12.8,+          2.65+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "cce79db4e5e3ea10a58bd7cfb6485998555781c2f5ec54cee8d1a6d21ee9669a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -246,4 +286,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}