component
CD74ACT153M96
Public Made by Adomby adom
Texas Instruments Signal Switches, Multiplexers, Decoders, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# CD74ACT153M96++**Texas Instruments** · Signal Switches, Multiplexers, Decoders · SOIC-16++CD74ACT153M96 from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | 1G | input | Active-low strobe input for the first 4-line section; the function table shows Y is forced low when 1G is high, and it presents a 0.47 unit load. |+| 2 | B | input | Select input B, common to both 4-line sections, with a 1 unit load per the ACT input load table. |+| 3 | 1C3 | input | Data input 3 of the first 4-line section, selected when A and B address it, with a 1 unit load. |+| 4 | 1C2 | input | Data input 2 of the first 4-line section, selected when A and B address it, with a 1 unit load. |+| 5 | 1C1 | input | Data input 1 of the first 4-line section, selected when A and B address it, with a 1 unit load. |+| 6 | 1C0 | input | Data input 0 of the first 4-line section, selected when A and B address it, with a 1 unit load. |+| 7 | 1Y | output | Output of the first 4-line section; the datasheet rates it for ±24 mA drive current (IOH −24 mA, IOL 24 mA at 4.5 V minimum VCC). |+| 8 | GND | power_in | Ground reference for the device. |+| 9 | 2Y | output | Output of the second 4-line section; the datasheet rates it for ±24 mA drive current (IOH −24 mA, IOL 24 mA at 4.5 V minimum VCC). |+| 10 | 2C0 | input | Data input 0 of the second 4-line section, selected when A and B address it, with a 1 unit load. |+| 11 | 2C1 | input | Data input 1 of the second 4-line section, selected when A and B address it, with a 1 unit load. |+| 12 | 2C2 | input | Data input 2 of the second 4-line section, selected when A and B address it, with a 1 unit load. |+| 13 | 2C3 | input | Data input 3 of the second 4-line section, selected when A and B address it, with a 1 unit load. |+| 14 | A | input | Select input A, common to both 4-line sections, with a 1 unit load per the ACT input load table. |+| 15 | 2G | input | Active-low strobe input for the second 4-line section; the function table shows Y is forced low when 2G is high, and it presents a 0.47 unit load. |+| 16 | VCC | power_in | Supply voltage, recommended 4.5 V to 5.5 V; absolute maximum is −0.5 V to 6 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16 |+| Category | Logic |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `CD74ACT153M96`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16 (KiCad packages3D, STEP)+- 3D model files: `cd74act153m96-etched.step` / `cd74act153m96-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cd74act153m96.step` / `cd74act153m96.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/cd74act153) (17 pp, sha256 `252ed0277b857d3a`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/cd74act153m96-datasheet.pdf)
page.jsonadded+248@@ -0,0 +1,248 @@+{+ "slug": "cd74act153m96",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Signal Switches, Multiplexers, Decoders, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "logic",+ "cd74act153m96",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "cd74act153m96.kicad_sym",+ "cd74act153m96.kicad_mod",+ "cd74act153m96.glb",+ "cd74act153m96.step",+ "cd74act153m96.lbr",+ "docs/hero.png",+ "docs/cd74act153m96-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "cd74act153m96-hero.glb",+ "cd74act153m96-hero.overlay.json"+ ],+ "component": {+ "mpn": "CD74ACT153M96",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-16",+ "pin_count": 16,+ "category": "Logic",+ "subcategory": "Signal Switches, Multiplexers, Decoders",+ "datasheet": "https://www.ti.com/cn/lit/gpn/cd74act153",+ "parts": {+ "symbol": "cd74act153m96.kicad_sym",+ "footprint": "cd74act153m96.kicad_mod",+ "model_3d": "cd74act153m96-hero.glb",+ "model_3d_plain": "cd74act153m96.glb",+ "model_3d_step": "cd74act153m96-etched.step",+ "model_3d_step_plain": "cd74act153m96.step",+ "lbr": "cd74act153m96.lbr"+ },+ "distributor_links": {+ "lcsc": "C1879876",+ "digikey": "296-CD74ACT153M96TR-ND",+ "mouser": "595-CD74ACT153M96"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T19:59:27Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-CD74ACT153M96TR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-CD74ACT153M96",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "1G",+ "type": "input",+ "description": "Active-low strobe input for the first 4-line section; the function table shows Y is forced low when 1G is high, and it presents a 0.47 unit load."+ },+ {+ "number": "2",+ "name": "B",+ "type": "input",+ "description": "Select input B, common to both 4-line sections, with a 1 unit load per the ACT input load table."+ },+ {+ "number": "3",+ "name": "1C3",+ "type": "input",+ "description": "Data input 3 of the first 4-line section, selected when A and B address it, with a 1 unit load."+ },+ {+ "number": "4",+ "name": "1C2",+ "type": "input",+ "description": "Data input 2 of the first 4-line section, selected when A and B address it, with a 1 unit load."+ },+ {+ "number": "5",+ "name": "1C1",+ "type": "input",+ "description": "Data input 1 of the first 4-line section, selected when A and B address it, with a 1 unit load."+ },+ {+ "number": "6",+ "name": "1C0",+ "type": "input",+ "description": "Data input 0 of the first 4-line section, selected when A and B address it, with a 1 unit load."+ },+ {+ "number": "7",+ "name": "1Y",+ "type": "output",+ "description": "Output of the first 4-line section; the datasheet rates it for ±24 mA drive current (IOH −24 mA, IOL 24 mA at 4.5 V minimum VCC)."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "9",+ "name": "2Y",+ "type": "output",+ "description": "Output of the second 4-line section; the datasheet rates it for ±24 mA drive current (IOH −24 mA, IOL 24 mA at 4.5 V minimum VCC)."+ },+ {+ "number": "10",+ "name": "2C0",+ "type": "input",+ "description": "Data input 0 of the second 4-line section, selected when A and B address it, with a 1 unit load."+ },+ {+ "number": "11",+ "name": "2C1",+ "type": "input",+ "description": "Data input 1 of the second 4-line section, selected when A and B address it, with a 1 unit load."+ },+ {+ "number": "12",+ "name": "2C2",+ "type": "input",+ "description": "Data input 2 of the second 4-line section, selected when A and B address it, with a 1 unit load."+ },+ {+ "number": "13",+ "name": "2C3",+ "type": "input",+ "description": "Data input 3 of the second 4-line section, selected when A and B address it, with a 1 unit load."+ },+ {+ "number": "14",+ "name": "A",+ "type": "input",+ "description": "Select input A, common to both 4-line sections, with a 1 unit load per the ACT input load table."+ },+ {+ "number": "15",+ "name": "2G",+ "type": "input",+ "description": "Active-low strobe input for the second 4-line section; the function table shows Y is forced low when 2G is high, and it presents a 0.47 unit load."+ },+ {+ "number": "16",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage, recommended 4.5 V to 5.5 V; absolute maximum is −0.5 V to 6 V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The datasheet lists the pin names in text-extraction order (pins 1–8 down the left column, then 16–9; Package is the D (SOIC-16) variant implied by the M96 suffix (tape and reel, SOIC, 16 pins, 2500 per; Pin descriptions for 1Y, 2Y and VCC cite drive and supply limits from the electrical, recommended an"+ ],+ "pages_sent": 17,+ "cost_usd": 0.0697,+ "at": "2026-10-08T19:59:08"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/cd74act153",+ "pages": 17,+ "sha256": "252ed0277b857d3a",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "cd74act153m96.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 9.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "cd74act153m96-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 9.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "a1ad08eecf2c28bdc1ecebdef467f6992f3210413e74bb62484f02239d113ea4",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}