component
CD4098BE
Public Made by Adomby adom
Texas Instruments Monostable Multivibrators, DIP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# CD4098BE++**Texas Instruments** · Monostable Multivibrators · DIP-16++CD4098BE from Texas Instruments, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CX1 | passive | External timing capacitor terminal for MONO1, electrically connected internally to pins 8 and 15 (VSS). |+| 2 | RXCX(1) | passive | Junction of external timing resistor RX and capacitor CX for MONO1 (RX minimum 5 kΩ, CX maximum 100 µF). |+| 3 | RESET(1) | input | Active-low reset input of MONO1 that immediately terminates the output pulse; tie to VDD if unused, or to VSS if the whole section is unused. |+| 4 | +TR(1) | input | Leading-edge trigger input of MONO1; tie to VSS if unused. |+| 5 | -TR(1) | input | Trailing-edge trigger input of MONO1; tie to VDD if unused. |+| 6 | Q1 | output | Buffered Q output of MONO1. |+| 7 | Q1̅ | output | Buffered complementary Q-bar output of MONO1. |+| 8 | VSS | power_in | Ground (negative supply) terminal, electrically connected internally to pins 1 and 15. |+| 9 | Q2̅ | output | Buffered complementary Q-bar output of MONO2. |+| 10 | Q2 | output | Buffered Q output of MONO2. |+| 11 | -TR(2) | input | Trailing-edge trigger input of MONO2; tie to VDD if unused. |+| 12 | +TR(2) | input | Leading-edge trigger input of MONO2; tie to VSS if unused. |+| 13 | RESET(2) | input | Active-low reset input of MONO2 that immediately terminates the output pulse; tie to VDD if unused, or to VSS if the whole section is unused. |+| 14 | RXCX(2) | passive | Junction of external timing resistor RX and capacitor CX for MONO2 (RX minimum 5 kΩ, CX maximum 100 µF). |+| 15 | CX2 | passive | External timing capacitor terminal for MONO2, electrically connected internally to pins 1 and 8 (VSS). |+| 16 | VDD | power_in | Positive supply terminal; recommended 3 V to 18 V, absolute maximum -0.5 V to +20 V referenced to VSS. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | DIP-16 |+| Category | Logic |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `CD4098BE`+- Footprint: `Package_DIP:DIP-16_W7.62mm`+- 3D model: DIP-16 (KiCad packages3D, STEP)+- 3D model files: `cd4098be-etched.step` / `cd4098be-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cd4098be.step` / `cd4098be.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/cd4098b) (17 pp, sha256 `699241f92bb31789`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/cd4098be-datasheet.pdf)
page.jsonadded+248@@ -0,0 +1,248 @@+{+ "slug": "cd4098be",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Monostable Multivibrators, DIP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "logic",+ "cd4098be",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "cd4098be.kicad_sym",+ "cd4098be.kicad_mod",+ "cd4098be.glb",+ "cd4098be.step",+ "cd4098be.lbr",+ "docs/hero.png",+ "docs/cd4098be-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "cd4098be-hero.glb",+ "cd4098be-hero.overlay.json"+ ],+ "component": {+ "mpn": "CD4098BE",+ "manufacturer": "Texas Instruments",+ "package": "DIP-16",+ "pin_count": 16,+ "category": "Logic",+ "subcategory": "Monostable Multivibrators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/cd4098b",+ "parts": {+ "symbol": "cd4098be.kicad_sym",+ "footprint": "cd4098be.kicad_mod",+ "model_3d": "cd4098be-hero.glb",+ "model_3d_plain": "cd4098be.glb",+ "model_3d_step": "cd4098be-etched.step",+ "model_3d_step_plain": "cd4098be.step",+ "lbr": "cd4098be.lbr"+ },+ "distributor_links": {+ "lcsc": "C5343",+ "digikey": "296-3526-ND",+ "mouser": "595-CD4098BE"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T04:27:35Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-3526-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-CD4098BE",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "CX1",+ "type": "passive",+ "description": "External timing capacitor terminal for MONO1, electrically connected internally to pins 8 and 15 (VSS)."+ },+ {+ "number": "2",+ "name": "RXCX(1)",+ "type": "passive",+ "description": "Junction of external timing resistor RX and capacitor CX for MONO1 (RX minimum 5 kΩ, CX maximum 100 µF)."+ },+ {+ "number": "3",+ "name": "RESET(1)",+ "type": "input",+ "description": "Active-low reset input of MONO1 that immediately terminates the output pulse; tie to VDD if unused, or to VSS if the whole section is unused."+ },+ {+ "number": "4",+ "name": "+TR(1)",+ "type": "input",+ "description": "Leading-edge trigger input of MONO1; tie to VSS if unused."+ },+ {+ "number": "5",+ "name": "-TR(1)",+ "type": "input",+ "description": "Trailing-edge trigger input of MONO1; tie to VDD if unused."+ },+ {+ "number": "6",+ "name": "Q1",+ "type": "output",+ "description": "Buffered Q output of MONO1."+ },+ {+ "number": "7",+ "name": "Q1̅",+ "type": "output",+ "description": "Buffered complementary Q-bar output of MONO1."+ },+ {+ "number": "8",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (negative supply) terminal, electrically connected internally to pins 1 and 15."+ },+ {+ "number": "9",+ "name": "Q2̅",+ "type": "output",+ "description": "Buffered complementary Q-bar output of MONO2."+ },+ {+ "number": "10",+ "name": "Q2",+ "type": "output",+ "description": "Buffered Q output of MONO2."+ },+ {+ "number": "11",+ "name": "-TR(2)",+ "type": "input",+ "description": "Trailing-edge trigger input of MONO2; tie to VDD if unused."+ },+ {+ "number": "12",+ "name": "+TR(2)",+ "type": "input",+ "description": "Leading-edge trigger input of MONO2; tie to VSS if unused."+ },+ {+ "number": "13",+ "name": "RESET(2)",+ "type": "input",+ "description": "Active-low reset input of MONO2 that immediately terminates the output pulse; tie to VDD if unused, or to VSS if the whole section is unused."+ },+ {+ "number": "14",+ "name": "RXCX(2)",+ "type": "passive",+ "description": "Junction of external timing resistor RX and capacitor CX for MONO2 (RX minimum 5 kΩ, CX maximum 100 µF)."+ },+ {+ "number": "15",+ "name": "CX2",+ "type": "passive",+ "description": "External timing capacitor terminal for MONO2, electrically connected internally to pins 1 and 8 (VSS)."+ },+ {+ "number": "16",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive supply terminal; recommended 3 V to 18 V, absolute maximum -0.5 V to +20 V referenced to VSS."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "vision",+ "consensus_model": "claude-opus-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Datasheet says terminals 1, 8, 15 are electrically connected internally; the logic diagram shows the; The overbars on Q-bar are hard to read in the low-quality scan. Names were taken from the terminal d",+ "vision extraction: provenance cannot be text-verified; needs consensus"+ ],+ "pages_sent": 12,+ "cost_usd": 0.1697,+ "at": "2026-10-08T04:27:19"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/cd4098b",+ "pages": 17,+ "sha256": "699241f92bb31789",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "cd4098be.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 19.177,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "17a30b1f0ab3fd5384a1231e3c63c394888d5b952c542a8c189e023ed3467464",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "cd4098be-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 19.177,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "fb56e03908b1450e37d5b5ccec4b640dd64490967f4c4b3a4f7a9748a0487d3a",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}