cc6920bso-50a

@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "CC6920BSO-50A",+    "manufacturer": "Cross chip",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "Current Sensors",+    "parts": {+      "symbol": "cc6920bso-50a.kicad_sym",+      "footprint": "cc6920bso-50a.kicad_mod",+      "model_3d": "cc6920bso-50a-etched.glb",+      "model_3d_plain": "cc6920bso-50a.glb",+      "model_3d_step": "cc6920bso-50a-etched.step",+      "model_3d_step_plain": "cc6920bso-50a.step",+      "lbr": "cc6920bso-50a.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "IP+",+        "type": "passive",+        "description": "Current Sampled + (primary conductor input, positive terminal). Tied internally to pin 2. Primary current flows from IP+ (pins 1,2) to IP- (pins 3,4). Continuous rating 40 A, peak 100 A for 3 s; conductor resistance ~0.9 mΩ."+      },+      {+        "number": "2",+        "name": "IP+",+        "type": "passive",+        "description": "Current Sampled + (primary conductor input, positive terminal). Tied internally to pin 1. Parallel with pin 1 to share primary current."+      },+      {+        "number": "3",+        "name": "IP-",+        "type": "passive",+        "description": "Current Sampled - (primary conductor output, negative terminal). Tied internally to pin 4. Return path for the sensed primary current."+      },+      {+        "number": "4",+        "name": "IP-",+        "type": "passive",+        "description": "Current Sampled - (primary conductor output, negative terminal). Tied internally to pin 3."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Signal ground / device return for the secondary (Hall sensor) side. Reference for VCC, VOUT, and VZCR."+      },+      {+        "number": "6",+        "name": "VZCR",+        "type": "output",+        "description": "Zero Current Reference Signal Output. Buffered VCC/2 reference (typ. 1.65 V at VCC=3.3 V). Source current ≤ 400 µA, sink current ≤ 3000 µA. Used to bias external amplifiers to the same zero-current midpoint as VOUT."+      },+      {+        "number": "7",+        "name": "OUT",+        "type": "output",+        "description": "Analog voltage output proportional to sensed primary current. VOUT = VCC/2 + 0.0264 × IP (V) for the 50A variant (26.4 mV/A). Zero-current output = VCC/2 (typ. 1.65 V at VCC=3.3 V); guaranteed linear range 0.33-2.97 V. Recommended load ≥1.5 kΩ, ≤1 nF; source ≤6 mA, sink ≤30 mA."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Power supply input, 3.0-3.6 V (typ. 3.3 V). Typical supply current 20 mA. Bypass with 0.1 µF to GND close to the pin."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}