cc6920bso-10a

@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "CC6920BSO-10A",+    "manufacturer": "Cross chip",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "Current Sensors",+    "parts": {+      "symbol": "cc6920bso-10a.kicad_sym",+      "footprint": "cc6920bso-10a.kicad_mod",+      "model_3d": "cc6920bso-10a-etched.glb",+      "model_3d_plain": "cc6920bso-10a.glb",+      "model_3d_step": "cc6920bso-10a-etched.step",+      "model_3d_step_plain": "cc6920bso-10a.step",+      "lbr": "cc6920bso-10a.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "IP+",+        "type": "passive",+        "description": "Current-sampled positive input terminal. Tie to pin 2 externally; primary current flows from IP+ (pins 1,2) through the internal ~0.9 mΩ copper conductor to IP- (pins 3,4). Rated up to ±50 A continuous, 100 A peak for 3 s."+      },+      {+        "number": "2",+        "name": "IP+",+        "type": "passive",+        "description": "Current-sampled positive input terminal (second leg of the primary conductor). Electrically common with pin 1; parallel externally to carry the full primary current. 3500 VRMS isolated from pins 5-8."+      },+      {+        "number": "3",+        "name": "IP-",+        "type": "passive",+        "description": "Current-sampled negative input terminal. Electrically common with pin 4; the primary current exits here after passing through the internal copper conductor. 3500 VRMS isolated from pins 5-8."+      },+      {+        "number": "4",+        "name": "IP-",+        "type": "passive",+        "description": "Current-sampled negative input terminal (second leg). Electrically common with pin 3; parallel externally to carry full primary current. Positive IP is defined as current flowing IP+ → IP-."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Signal-side ground reference for VCC, VOUT, and VZCR. Isolated from the primary IP+/IP- current path by 3500 VRMS."+      },+      {+        "number": "6",+        "name": "VZCR",+        "type": "output",+        "description": "Zero-current reference signal output, typically VCC/2 (1.65 V at VCC=3.3 V). Provides a matched reference for downstream ratiometric ADC or differential-amplifier stages. Source ≤400 µA, sink ≤3000 µA (reserve ~0.3 mA headroom per datasheet note)."+      },+      {+        "number": "7",+        "name": "OUT",+        "type": "output",+        "description": "Analog voltage output proportional to sensed primary current. For CC6920BSO-10A: VOUT = VCC/2 + 0.132 × IP(A), sensitivity 132 mV/A (127-135 mV/A). Guaranteed accurate/linear over 0.33-2.97 V; rise time ~1 µs, bandwidth 250 kHz. Drive: ≤6 mA source, ≤30 mA sink, load ≥1.5 kΩ, CL ≤1 nF."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply input, 3.0-3.6 V (3.3 V typ), absolute max 7 V. Supply current ~20 mA typ (25 mA max). Decouple with 0.1 µF to GND close to the pin (per typical application circuits)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}