component
CC2642R1FRGZR
Public Made by Adomby adom
Texas Instruments RF Transceiver ICs, VQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+86@@ -0,0 +1,86 @@+# CC2642R1FRGZR++**Texas Instruments** · RF Transceiver ICs · VQFN-48-EP(7x7)++CC2642R1FRGZR from Texas Instruments, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | RF_P | bidirectional | Positive RF input signal to LNA during RX and positive RF output signal from PA during TX. |+| 2 | RF_N | bidirectional | Negative RF input signal to LNA during RX and negative RF output signal from PA during TX. |+| 3 | X32K_Q1 | passive | 32 kHz crystal oscillator pin 1; NC or GND if unused. |+| 4 | X32K_Q2 | passive | 32 kHz crystal oscillator pin 2; NC or GND if unused. |+| 5 | DIO_0 | bidirectional | Digital GPIO. |+| 6 | DIO_1 | bidirectional | Digital GPIO. |+| 7 | DIO_2 | bidirectional | Digital GPIO. |+| 8 | DIO_3 | bidirectional | Digital GPIO. |+| 9 | DIO_4 | bidirectional | Digital GPIO. |+| 10 | DIO_5 | bidirectional | Digital GPIO with high-drive capability. |+| 11 | DIO_6 | bidirectional | Digital GPIO with high-drive capability. |+| 12 | DIO_7 | bidirectional | Digital GPIO with high-drive capability. |+| 13 | VDDS2 | power_in | 1.8 V to 3.8 V DIO supply; must be at the same potential as VDDS. |+| 14 | DIO_8 | bidirectional | Digital GPIO. |+| 15 | DIO_9 | bidirectional | Digital GPIO. |+| 16 | DIO_10 | bidirectional | Digital GPIO. |+| 17 | DIO_11 | bidirectional | Digital GPIO. |+| 18 | DIO_12 | bidirectional | Digital GPIO. |+| 19 | DIO_13 | bidirectional | Digital GPIO. |+| 20 | DIO_14 | bidirectional | Digital GPIO. |+| 21 | DIO_15 | bidirectional | Digital GPIO. |+| 22 | VDDS3 | power_in | 1.8 V to 3.8 V DIO supply; must be at the same potential as VDDS. |+| 23 | DCOUPL | passive | For decoupling of the internal 1.27 V regulated digital supply; do not supply external circuitry from this pin. |+| 24 | JTAG_TMSC | bidirectional | Digital JTAG TMSC with high-drive capability. |+| 25 | JTAG_TCKC | input | Digital JTAG TCKC input. |+| 26 | DIO_16 | bidirectional | Digital GPIO, JTAG_TDO, high-drive capability. |+| 27 | DIO_17 | bidirectional | Digital GPIO, JTAG_TDI, high-drive capability. |+| 28 | DIO_18 | bidirectional | Digital GPIO. |+| 29 | DIO_19 | bidirectional | Digital GPIO. |+| 30 | DIO_20 | bidirectional | Digital GPIO. |+| 31 | DIO_21 | bidirectional | Digital GPIO. |+| 32 | DIO_22 | bidirectional | Digital GPIO. |+| 33 | DCDC_SW | power_out | Power output from the internal DC/DC converter; NC if the DC/DC converter is not used. |+| 34 | VDDS_DCDC | power_in | 1.8 V to 3.8 V DC/DC converter supply; connect to VDDS if the DC/DC is unused. |+| 35 | RESET_N | input | Digital reset, active low, with no internal pullup resistor. |+| 36 | DIO_23 | bidirectional | Digital or analog GPIO with analog capability. |+| 37 | DIO_24 | bidirectional | Digital or analog GPIO with analog capability. |+| 38 | DIO_25 | bidirectional | Digital or analog GPIO with analog capability. |+| 39 | DIO_26 | bidirectional | Digital or analog GPIO with analog capability. |+| 40 | DIO_27 | bidirectional | Digital or analog GPIO with analog capability. |+| 41 | DIO_28 | bidirectional | Digital or analog GPIO with analog capability. |+| 42 | DIO_29 | bidirectional | Digital or analog GPIO with analog capability. |+| 43 | DIO_30 | bidirectional | Digital or analog GPIO with analog capability. |+| 44 | VDDS | power_in | 1.8 V to 3.8 V main chip supply. |+| 45 | VDDR | power_in | Internal 1.68 V supply that must be powered from the internal DC/DC converter or the internal LDO; do not supply external circuitry from this pin. |+| 46 | X48M_N | passive | 48 MHz crystal oscillator pin 1. |+| 47 | X48M_P | passive | 48 MHz crystal oscillator pin 2. |+| 48 | VDDR_RF | power_in | Internal 1.68 V supply that must be powered from the internal DC/DC converter or LDO; connect to VDDR if the DC/DC is not used. |+| 49 | EGP | power_in | Exposed ground pad; the only ground connection for the device and must have a good electrical connection to PCB ground. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-48-EP(7x7) |+| Category | RF And Wireless |+| Pins | 49 |++## CAD (KiCad official)++- Symbol: `CC2642R1FRGZR`+- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`+- 3D model: VQFN-48-EP(7x7) (KiCad packages3D, STEP)+- 3D model files: `cc2642r1frgzr-etched.step` / `cc2642r1frgzr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cc2642r1frgzr.step` / `cc2642r1frgzr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/cc2642r) (59 pp, sha256 `2629b89d248767de`, retrieved 2026-09-29, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/cc2642r1frgzr-datasheet.pdf)
page.jsonadded+405@@ -0,0 +1,405 @@+{+ "slug": "cc2642r1frgzr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments RF Transceiver ICs, VQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "rf and wireless",+ "cc2642r1frgzr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "cc2642r1frgzr.kicad_sym",+ "cc2642r1frgzr.kicad_mod",+ "cc2642r1frgzr.glb",+ "cc2642r1frgzr.step",+ "cc2642r1frgzr.lbr",+ "docs/hero.png",+ "docs/cc2642r1frgzr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "CC2642R1FRGZR",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-48-EP(7x7)",+ "pin_count": 49,+ "category": "RF And Wireless",+ "subcategory": "RF Transceiver ICs",+ "datasheet": "https://www.ti.com/cn/lit/gpn/cc2642r",+ "parts": {+ "symbol": "cc2642r1frgzr.kicad_sym",+ "footprint": "cc2642r1frgzr.kicad_mod",+ "model_3d": "cc2642r1frgzr-etched.glb",+ "model_3d_plain": "cc2642r1frgzr.glb",+ "model_3d_step": "cc2642r1frgzr-etched.step",+ "model_3d_step_plain": "cc2642r1frgzr.step",+ "lbr": "cc2642r1frgzr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2151618",+ "digikey": "296-CC2642R1FRGZRTR-ND",+ "mouser": "595-CC2642R1FRGZR"+ },+ "distributor_check": {+ "checked_at": "2026-09-29T22:39:21Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-CC2642R1FRGZRTR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-CC2642R1FRGZR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "RF_P",+ "type": "bidirectional",+ "description": "Positive RF input signal to LNA during RX and positive RF output signal from PA during TX."+ },+ {+ "number": "2",+ "name": "RF_N",+ "type": "bidirectional",+ "description": "Negative RF input signal to LNA during RX and negative RF output signal from PA during TX."+ },+ {+ "number": "3",+ "name": "X32K_Q1",+ "type": "passive",+ "description": "32 kHz crystal oscillator pin 1; NC or GND if unused."+ },+ {+ "number": "4",+ "name": "X32K_Q2",+ "type": "passive",+ "description": "32 kHz crystal oscillator pin 2; NC or GND if unused."+ },+ {+ "number": "5",+ "name": "DIO_0",+ "type": "bidirectional",+ "description": "Digital GPIO."+ },+ {+ "number": "6",+ "name": "DIO_1",+ "type": "bidirectional",+ "description": "Digital GPIO."+ },+ {+ "number": "7",+ "name": "DIO_2",+ "type": "bidirectional",+ "description": "Digital GPIO."+ },+ {+ "number": "8",+ "name": "DIO_3",+ "type": "bidirectional",+ "description": "Digital GPIO."+ },+ {+ "number": "9",+ "name": "DIO_4",+ "type": "bidirectional",+ "description": "Digital GPIO."+ },+ {+ "number": "10",+ "name": "DIO_5",+ "type": "bidirectional",+ "description": "Digital GPIO with high-drive capability."+ },+ {+ "number": "11",+ "name": "DIO_6",+ "type": "bidirectional",+ "description": "Digital GPIO with high-drive capability."+ },+ {+ "number": "12",+ "name": "DIO_7",+ "type": "bidirectional",+ "description": "Digital GPIO with high-drive capability."+ },+ {+ "number": "13",+ "name": "VDDS2",+ "type": "power_in",+ "description": "1.8 V to 3.8 V DIO supply; must be at the same potential as VDDS."+ },+ {+ "number": "14",+ "name": "DIO_8",+ "type": "bidirectional",+ "description": "Digital GPIO."+ },+ {+ "number": "15",+ "name": "DIO_9",+ "type": "bidirectional",+ "description": "Digital GPIO."+ },+ {+ "number": "16",+ "name": "DIO_10",+ "type": "bidirectional",+ "description": "Digital GPIO."+ },+ {+ "number": "17",+ "name": "DIO_11",+ "type": "bidirectional",+ "description": "Digital GPIO."+ },+ {+ "number": "18",+ "name": "DIO_12",+ "type": "bidirectional",+ "description": "Digital GPIO."+ },+ {+ "number": "19",+ "name": "DIO_13",+ "type": "bidirectional",+ "description": "Digital GPIO."+ },+ {+ "number": "20",+ "name": "DIO_14",+ "type": "bidirectional",+ "description": "Digital GPIO."+ },+ {+ "number": "21",+ "name": "DIO_15",+ "type": "bidirectional",+ "description": "Digital GPIO."+ },+ {+ "number": "22",+ "name": "VDDS3",+ "type": "power_in",+ "description": "1.8 V to 3.8 V DIO supply; must be at the same potential as VDDS."+ },+ {+ "number": "23",+ "name": "DCOUPL",+ "type": "passive",+ "description": "For decoupling of the internal 1.27 V regulated digital supply; do not supply external circuitry from this pin."+ },+ {+ "number": "24",+ "name": "JTAG_TMSC",+ "type": "bidirectional",+ "description": "Digital JTAG TMSC with high-drive capability."+ },+ {+ "number": "25",+ "name": "JTAG_TCKC",+ "type": "input",+ "description": "Digital JTAG TCKC input."+ },+ {+ "number": "26",+ "name": "DIO_16",+ "type": "bidirectional",+ "description": "Digital GPIO, JTAG_TDO, high-drive capability."+ },+ {+ "number": "27",+ "name": "DIO_17",+ "type": "bidirectional",+ "description": "Digital GPIO, JTAG_TDI, high-drive capability."+ },+ {+ "number": "28",+ "name": "DIO_18",+ "type": "bidirectional",+ "description": "Digital GPIO."+ },+ {+ "number": "29",+ "name": "DIO_19",+ "type": "bidirectional",+ "description": "Digital GPIO."+ },+ {+ "number": "30",+ "name": "DIO_20",+ "type": "bidirectional",+ "description": "Digital GPIO."+ },+ {+ "number": "31",+ "name": "DIO_21",+ "type": "bidirectional",+ "description": "Digital GPIO."+ },+ {+ "number": "32",+ "name": "DIO_22",+ "type": "bidirectional",+ "description": "Digital GPIO."+ },+ {+ "number": "33",+ "name": "DCDC_SW",+ "type": "power_out",+ "description": "Power output from the internal DC/DC converter; NC if the DC/DC converter is not used."+ },+ {+ "number": "34",+ "name": "VDDS_DCDC",+ "type": "power_in",+ "description": "1.8 V to 3.8 V DC/DC converter supply; connect to VDDS if the DC/DC is unused."+ },+ {+ "number": "35",+ "name": "RESET_N",+ "type": "input",+ "description": "Digital reset, active low, with no internal pullup resistor."+ },+ {+ "number": "36",+ "name": "DIO_23",+ "type": "bidirectional",+ "description": "Digital or analog GPIO with analog capability."+ },+ {+ "number": "37",+ "name": "DIO_24",+ "type": "bidirectional",+ "description": "Digital or analog GPIO with analog capability."+ },+ {+ "number": "38",+ "name": "DIO_25",+ "type": "bidirectional",+ "description": "Digital or analog GPIO with analog capability."+ },+ {+ "number": "39",+ "name": "DIO_26",+ "type": "bidirectional",+ "description": "Digital or analog GPIO with analog capability."+ },+ {+ "number": "40",+ "name": "DIO_27",+ "type": "bidirectional",+ "description": "Digital or analog GPIO with analog capability."+ },+ {+ "number": "41",+ "name": "DIO_28",+ "type": "bidirectional",+ "description": "Digital or analog GPIO with analog capability."+ },+ {+ "number": "42",+ "name": "DIO_29",+ "type": "bidirectional",+ "description": "Digital or analog GPIO with analog capability."+ },+ {+ "number": "43",+ "name": "DIO_30",+ "type": "bidirectional",+ "description": "Digital or analog GPIO with analog capability."+ },+ {+ "number": "44",+ "name": "VDDS",+ "type": "power_in",+ "description": "1.8 V to 3.8 V main chip supply."+ },+ {+ "number": "45",+ "name": "VDDR",+ "type": "power_in",+ "description": "Internal 1.68 V supply that must be powered from the internal DC/DC converter or the internal LDO; do not supply external circuitry from this pin."+ },+ {+ "number": "46",+ "name": "X48M_N",+ "type": "passive",+ "description": "48 MHz crystal oscillator pin 1."+ },+ {+ "number": "47",+ "name": "X48M_P",+ "type": "passive",+ "description": "48 MHz crystal oscillator pin 2."+ },+ {+ "number": "48",+ "name": "VDDR_RF",+ "type": "power_in",+ "description": "Internal 1.68 V supply that must be powered from the internal DC/DC converter or LDO; connect to VDDR if the DC/DC is not used."+ },+ {+ "number": "49",+ "name": "EGP",+ "type": "power_in",+ "description": "Exposed ground pad; the only ground connection for the device and must have a good electrical connection to PCB ground."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Exposed ground pad (EGP) is listed in Table 7-1 Signal Descriptions on page 7 but has no assigned pi",+ "exposed pad 49 added from the footprint"+ ],+ "pages_sent": 14,+ "cost_usd": 0.208,+ "at": "2026-09-29T22:39:02"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/cc2642r",+ "pages": 59,+ "sha256": "2629b89d248767de",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 49,+ "described": 49,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}