← Commit history

Initial commit: component/cc1201rhbr

Ray ·d2b6815cbf ·
2 files changed +380
README.mdadded+70
@@ -0,0 +1,70 @@+# CC1201RHBR++**Texas Instruments** · RF Transceiver ICs · VQFN-32-EP(5x5)++CC1201RHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD_GUARD | power_in | 2.0-3.6 V VDD supply input. |+| 2 | RESET_N | input | Asynchronous, active-low digital reset input. |+| 3 | GPIO3 | bidirectional | General-purpose digital I/O. |+| 4 | GPIO2 | bidirectional | General-purpose digital I/O. |+| 5 | DVDD | power_in | 2.0-3.6 V digital VDD to internal digital regulator. |+| 6 | DCPL | power_out | Digital regulator output (2.0-3.6 V) to external decoupling capacitor. |+| 7 | SI | input | Serial data input. |+| 8 | SCLK | input | Serial data clock input. |+| 9 | SO(GPIO1) | bidirectional | Serial data output (general-purpose I/O). |+| 10 | GPIO0 | bidirectional | General-purpose digital I/O. |+| 11 | CSn | input | Active-low chip select input. |+| 12 | DVDD | power_in | 2.0-3.6 V digital VDD supply input. |+| 13 | AVDD_IF | power_in | 2.0-3.6 V analog IF VDD supply input. |+| 14 | RBIAS | passive | External high-precision resistor connection point. |+| 15 | AVDD_RF | power_in | 2.0-3.6 V analog RF VDD supply input. |+| 16 | N.C. | unconnected | Not connected. |+| 17 | PA | output | Single-ended TX output (requires DC path to VDD). |+| 18 | TRX_SW | tri_state | TX and RX switch, connected internally to GND in TX and floating (high-impedance) in RX. |+| 19 | LNA_P | input | Differential RX input positive (requires DC path to ground). |+| 20 | LNA_N | input | Differential RX input negative (requires DC path to ground). |+| 21 | DCPL_VCO | power_out | External decoupling pin for VCO supply regulator (2.0-3.6 V). |+| 22 | AVDD_SYNTH1 | power_in | 2.0-3.6 V synthesizer VDD supply input. |+| 23 | LPF0 | passive | External loop filter component connection. |+| 24 | LPF1 | passive | External loop filter component connection. |+| 25 | AVDD_PFD_CHP | power_in | 2.0-3.6 V PFD/charge-pump VDD supply input. |+| 26 | DCPL_PFD_CHP | power_out | External decoupling pin for PFD and charge-pump regulator (2.0-3.6 V). |+| 27 | AVDD_SYNTH2 | power_in | 2.0-3.6 V synthesizer VDD supply input. |+| 28 | AVDD_XOSC | power_in | 2.0-3.6 V crystal oscillator VDD supply input. |+| 29 | DCPL_XOSC | power_out | External decoupling pin for XOSC supply regulator (2.0-3.6 V). |+| 30 | XOSC_Q1 | passive | Crystal oscillator pin 1 (ground if using TCXO or external clock via EXT_XOSC). |+| 31 | XOSC_Q2 | passive | Crystal oscillator pin 2 (float if using TCXO or external clock via EXT_XOSC). |+| 32 | EXT_XOSC | input | External clock input (ground if crystal connected to XOSC_Q1/Q2). |+| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-32-EP(5x5) |+| Category | RF And Wireless |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `CC1201RHBR`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)+- 3D model files: `cc1201rhbr-etched.step` / `cc1201rhbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cc1201rhbr.step` / `cc1201rhbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/cc1201) (37 pp, sha256 `31597f5b6e39cb70`, retrieved 2026-10-01, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/cc1201rhbr-datasheet.pdf)
page.jsonadded+310
@@ -0,0 +1,310 @@+{+  "slug": "cc1201rhbr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments RF Transceiver ICs, VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "rf and wireless",+    "cc1201rhbr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "cc1201rhbr.kicad_sym",+    "cc1201rhbr.kicad_mod",+    "cc1201rhbr.glb",+    "cc1201rhbr.step",+    "cc1201rhbr.lbr",+    "docs/hero.png",+    "docs/cc1201rhbr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "CC1201RHBR",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-32-EP(5x5)",+    "pin_count": 33,+    "category": "RF And Wireless",+    "subcategory": "RF Transceiver ICs",+    "datasheet": "https://www.ti.com/cn/lit/gpn/cc1201",+    "parts": {+      "symbol": "cc1201rhbr.kicad_sym",+      "footprint": "cc1201rhbr.kicad_mod",+      "model_3d": "cc1201rhbr-etched.glb",+      "model_3d_plain": "cc1201rhbr.glb",+      "model_3d_step": "cc1201rhbr-etched.step",+      "model_3d_step_plain": "cc1201rhbr.step",+      "lbr": "cc1201rhbr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2151506",+      "digikey": "296-39977-2-ND",+      "mouser": "595-CC1201RHBR"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T04:29:09Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-39977-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-CC1201RHBR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VDD_GUARD",+        "type": "power_in",+        "description": "2.0-3.6 V VDD supply input."+      },+      {+        "number": "2",+        "name": "RESET_N",+        "type": "input",+        "description": "Asynchronous, active-low digital reset input."+      },+      {+        "number": "3",+        "name": "GPIO3",+        "type": "bidirectional",+        "description": "General-purpose digital I/O."+      },+      {+        "number": "4",+        "name": "GPIO2",+        "type": "bidirectional",+        "description": "General-purpose digital I/O."+      },+      {+        "number": "5",+        "name": "DVDD",+        "type": "power_in",+        "description": "2.0-3.6 V digital VDD to internal digital regulator."+      },+      {+        "number": "6",+        "name": "DCPL",+        "type": "power_out",+        "description": "Digital regulator output (2.0-3.6 V) to external decoupling capacitor."+      },+      {+        "number": "7",+        "name": "SI",+        "type": "input",+        "description": "Serial data input."+      },+      {+        "number": "8",+        "name": "SCLK",+        "type": "input",+        "description": "Serial data clock input."+      },+      {+        "number": "9",+        "name": "SO(GPIO1)",+        "type": "bidirectional",+        "description": "Serial data output (general-purpose I/O)."+      },+      {+        "number": "10",+        "name": "GPIO0",+        "type": "bidirectional",+        "description": "General-purpose digital I/O."+      },+      {+        "number": "11",+        "name": "CSn",+        "type": "input",+        "description": "Active-low chip select input."+      },+      {+        "number": "12",+        "name": "DVDD",+        "type": "power_in",+        "description": "2.0-3.6 V digital VDD supply input."+      },+      {+        "number": "13",+        "name": "AVDD_IF",+        "type": "power_in",+        "description": "2.0-3.6 V analog IF VDD supply input."+      },+      {+        "number": "14",+        "name": "RBIAS",+        "type": "passive",+        "description": "External high-precision resistor connection point."+      },+      {+        "number": "15",+        "name": "AVDD_RF",+        "type": "power_in",+        "description": "2.0-3.6 V analog RF VDD supply input."+      },+      {+        "number": "16",+        "name": "N.C.",+        "type": "unconnected",+        "description": "Not connected."+      },+      {+        "number": "17",+        "name": "PA",+        "type": "output",+        "description": "Single-ended TX output (requires DC path to VDD)."+      },+      {+        "number": "18",+        "name": "TRX_SW",+        "type": "tri_state",+        "description": "TX and RX switch, connected internally to GND in TX and floating (high-impedance) in RX."+      },+      {+        "number": "19",+        "name": "LNA_P",+        "type": "input",+        "description": "Differential RX input positive (requires DC path to ground)."+      },+      {+        "number": "20",+        "name": "LNA_N",+        "type": "input",+        "description": "Differential RX input negative (requires DC path to ground)."+      },+      {+        "number": "21",+        "name": "DCPL_VCO",+        "type": "power_out",+        "description": "External decoupling pin for VCO supply regulator (2.0-3.6 V)."+      },+      {+        "number": "22",+        "name": "AVDD_SYNTH1",+        "type": "power_in",+        "description": "2.0-3.6 V synthesizer VDD supply input."+      },+      {+        "number": "23",+        "name": "LPF0",+        "type": "passive",+        "description": "External loop filter component connection."+      },+      {+        "number": "24",+        "name": "LPF1",+        "type": "passive",+        "description": "External loop filter component connection."+      },+      {+        "number": "25",+        "name": "AVDD_PFD_CHP",+        "type": "power_in",+        "description": "2.0-3.6 V PFD/charge-pump VDD supply input."+      },+      {+        "number": "26",+        "name": "DCPL_PFD_CHP",+        "type": "power_out",+        "description": "External decoupling pin for PFD and charge-pump regulator (2.0-3.6 V)."+      },+      {+        "number": "27",+        "name": "AVDD_SYNTH2",+        "type": "power_in",+        "description": "2.0-3.6 V synthesizer VDD supply input."+      },+      {+        "number": "28",+        "name": "AVDD_XOSC",+        "type": "power_in",+        "description": "2.0-3.6 V crystal oscillator VDD supply input."+      },+      {+        "number": "29",+        "name": "DCPL_XOSC",+        "type": "power_out",+        "description": "External decoupling pin for XOSC supply regulator (2.0-3.6 V)."+      },+      {+        "number": "30",+        "name": "XOSC_Q1",+        "type": "passive",+        "description": "Crystal oscillator pin 1 (ground if using TCXO or external clock via EXT_XOSC)."+      },+      {+        "number": "31",+        "name": "XOSC_Q2",+        "type": "passive",+        "description": "Crystal oscillator pin 2 (float if using TCXO or external clock via EXT_XOSC)."+      },+      {+        "number": "32",+        "name": "EXT_XOSC",+        "type": "input",+        "description": "External clock input (ground if crystal connected to XOSC_Q1/Q2)."+      },+      {+        "number": "33",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Exposed pad (EP) not assigned explicit pin number in datasheet table; designated as 'EP' per standar",+          "exposed pad 33 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 11,+        "cost_usd": 0.1658,+        "at": "2026-10-01T04:28:51"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/cc1201",+        "pages": 37,+        "sha256": "31597f5b6e39cb70",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 33,+        "described": 33,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file