← Commit history
README.mdadded+70@@ -0,0 +1,70 @@+# CC1125RHBR++**Texas Instruments** · RF Transceiver ICs · HVQFN-32-EP(5x5)++CC1125RHBR from Texas Instruments, in a HVQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD_GUARD | power_in | 2.0-3.6 V power supply input for guard circuit. |+| 2 | RESET_N | input | Asynchronous active-low digital reset input. |+| 3 | GPIO3 | bidirectional | General-purpose digital I/O pin. |+| 4 | GPIO2 | bidirectional | General-purpose digital I/O pin. |+| 5 | DVDD | power_in | 2.0-3.6 V digital power supply input to internal digital regulator. |+| 6 | DCPL | power_out | Digital regulator decoupling capacitor connection requiring external capacitor to ground. |+| 7 | SI | input | Serial data input for SPI interface. |+| 8 | SCLK | input | Serial clock input for SPI interface. |+| 9 | SO(GPIO1) | bidirectional | Serial data output for SPI interface or general-purpose I/O pin. |+| 10 | GPIO0 | bidirectional | General-purpose digital I/O pin. |+| 11 | CSn | input | Active-low chip select input for SPI interface. |+| 12 | DVDD | power_in | 2.0-3.6 V digital power supply input for digital circuits. |+| 13 | AVDD_IF | power_in | 2.0-3.6 V analog power supply input for intermediate frequency circuits. |+| 14 | RBIAS | passive | External high-precision resistor connection for bias network. |+| 15 | AVDD_RF | power_in | 2.0-3.6 V analog power supply input for RF circuits. |+| 16 | N.C. | unconnected | Not connected internally. |+| 17 | PA | output | Single-ended TX power amplifier output requiring DC path to VDD. |+| 18 | TRX_SW | tri_state | TX/RX switch control connected internally to GND in TX mode and floating in RX mode. |+| 19 | LNA_P | input | Differential RX input positive requiring DC path to GND. |+| 20 | LNA_N | input | Differential RX input negative requiring DC path to GND. |+| 21 | DCPL_VCO | power_out | VCO supply regulator decoupling capacitor connection requiring external capacitor. |+| 22 | AVDD_SYNTH1 | power_in | 2.0-3.6 V analog power supply input for frequency synthesizer circuit. |+| 23 | LPF0 | passive | External loop filter component connection for PLL. |+| 24 | LPF1 | passive | External loop filter component connection for PLL. |+| 25 | AVDD_PFD_CHP | power_in | 2.0-3.6 V analog power supply input for phase frequency detector and charge pump circuits. |+| 26 | DCPL_PFD_CHP | power_out | PFD and charge pump regulator decoupling capacitor connection requiring external capacitor. |+| 27 | AVDD_SYNTH2 | power_in | 2.0-3.6 V analog power supply input for frequency synthesizer circuit. |+| 28 | AVDD_XOSC | power_in | 2.0-3.6 V analog power supply input for crystal oscillator circuit. |+| 29 | DCPL_XOSC | power_out | Crystal oscillator regulator decoupling capacitor connection requiring external capacitor. |+| 30 | XOSC_Q1 | passive | Crystal oscillator pin 1, must be grounded if external TCXO or clock is connected to EXT_XOSC. |+| 31 | XOSC_Q2 | passive | Crystal oscillator pin 2, must be left floating if external TCXO or clock is connected to EXT_XOSC. |+| 32 | EXT_XOSC | input | External clock input, must be grounded if internal crystal is connected to XOSC_Q1 and XOSC_Q2. |+| 33 | GND | power_in | Ground connection and exposed thermal pad, must be connected to solid ground plane. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HVQFN-32-EP(5x5) |+| Category | RF And Wireless |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `CC1125RHBR`+- Footprint: `Package_DFN_QFN:HVQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm`+- 3D model: HVQFN-32-EP(5x5) (KiCad packages3D, STEP)+- 3D model files: `cc1125rhbr-etched.step` / `cc1125rhbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cc1125rhbr.step` / `cc1125rhbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/cc1125) (38 pp, sha256 `abea680a01c90aee`, retrieved 2026-10-01, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/cc1125rhbr-datasheet.pdf)
page.jsonadded+308@@ -0,0 +1,308 @@+{+ "slug": "cc1125rhbr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments RF Transceiver ICs, HVQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "rf and wireless",+ "cc1125rhbr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "cc1125rhbr.kicad_sym",+ "cc1125rhbr.kicad_mod",+ "cc1125rhbr.glb",+ "cc1125rhbr.step",+ "cc1125rhbr.lbr",+ "docs/hero.png",+ "docs/cc1125rhbr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "CC1125RHBR",+ "manufacturer": "Texas Instruments",+ "package": "HVQFN-32-EP(5x5)",+ "pin_count": 33,+ "category": "RF And Wireless",+ "subcategory": "RF Transceiver ICs",+ "datasheet": "https://www.ti.com/cn/lit/gpn/cc1125",+ "parts": {+ "symbol": "cc1125rhbr.kicad_sym",+ "footprint": "cc1125rhbr.kicad_mod",+ "model_3d": "cc1125rhbr-etched.glb",+ "model_3d_plain": "cc1125rhbr.glb",+ "model_3d_step": "cc1125rhbr-etched.step",+ "model_3d_step_plain": "cc1125rhbr.step",+ "lbr": "cc1125rhbr.lbr"+ },+ "distributor_links": {+ "lcsc": "C133234",+ "digikey": "296-35669-2-ND",+ "mouser": "595-CC1125RHBR"+ },+ "distributor_check": {+ "checked_at": "2026-10-01T17:21:57Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-35669-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-CC1125RHBR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VDD_GUARD",+ "type": "power_in",+ "description": "2.0-3.6 V power supply input for guard circuit."+ },+ {+ "number": "2",+ "name": "RESET_N",+ "type": "input",+ "description": "Asynchronous active-low digital reset input."+ },+ {+ "number": "3",+ "name": "GPIO3",+ "type": "bidirectional",+ "description": "General-purpose digital I/O pin."+ },+ {+ "number": "4",+ "name": "GPIO2",+ "type": "bidirectional",+ "description": "General-purpose digital I/O pin."+ },+ {+ "number": "5",+ "name": "DVDD",+ "type": "power_in",+ "description": "2.0-3.6 V digital power supply input to internal digital regulator."+ },+ {+ "number": "6",+ "name": "DCPL",+ "type": "power_out",+ "description": "Digital regulator decoupling capacitor connection requiring external capacitor to ground."+ },+ {+ "number": "7",+ "name": "SI",+ "type": "input",+ "description": "Serial data input for SPI interface."+ },+ {+ "number": "8",+ "name": "SCLK",+ "type": "input",+ "description": "Serial clock input for SPI interface."+ },+ {+ "number": "9",+ "name": "SO(GPIO1)",+ "type": "bidirectional",+ "description": "Serial data output for SPI interface or general-purpose I/O pin."+ },+ {+ "number": "10",+ "name": "GPIO0",+ "type": "bidirectional",+ "description": "General-purpose digital I/O pin."+ },+ {+ "number": "11",+ "name": "CSn",+ "type": "input",+ "description": "Active-low chip select input for SPI interface."+ },+ {+ "number": "12",+ "name": "DVDD",+ "type": "power_in",+ "description": "2.0-3.6 V digital power supply input for digital circuits."+ },+ {+ "number": "13",+ "name": "AVDD_IF",+ "type": "power_in",+ "description": "2.0-3.6 V analog power supply input for intermediate frequency circuits."+ },+ {+ "number": "14",+ "name": "RBIAS",+ "type": "passive",+ "description": "External high-precision resistor connection for bias network."+ },+ {+ "number": "15",+ "name": "AVDD_RF",+ "type": "power_in",+ "description": "2.0-3.6 V analog power supply input for RF circuits."+ },+ {+ "number": "16",+ "name": "N.C.",+ "type": "unconnected",+ "description": "Not connected internally."+ },+ {+ "number": "17",+ "name": "PA",+ "type": "output",+ "description": "Single-ended TX power amplifier output requiring DC path to VDD."+ },+ {+ "number": "18",+ "name": "TRX_SW",+ "type": "tri_state",+ "description": "TX/RX switch control connected internally to GND in TX mode and floating in RX mode."+ },+ {+ "number": "19",+ "name": "LNA_P",+ "type": "input",+ "description": "Differential RX input positive requiring DC path to GND."+ },+ {+ "number": "20",+ "name": "LNA_N",+ "type": "input",+ "description": "Differential RX input negative requiring DC path to GND."+ },+ {+ "number": "21",+ "name": "DCPL_VCO",+ "type": "power_out",+ "description": "VCO supply regulator decoupling capacitor connection requiring external capacitor."+ },+ {+ "number": "22",+ "name": "AVDD_SYNTH1",+ "type": "power_in",+ "description": "2.0-3.6 V analog power supply input for frequency synthesizer circuit."+ },+ {+ "number": "23",+ "name": "LPF0",+ "type": "passive",+ "description": "External loop filter component connection for PLL."+ },+ {+ "number": "24",+ "name": "LPF1",+ "type": "passive",+ "description": "External loop filter component connection for PLL."+ },+ {+ "number": "25",+ "name": "AVDD_PFD_CHP",+ "type": "power_in",+ "description": "2.0-3.6 V analog power supply input for phase frequency detector and charge pump circuits."+ },+ {+ "number": "26",+ "name": "DCPL_PFD_CHP",+ "type": "power_out",+ "description": "PFD and charge pump regulator decoupling capacitor connection requiring external capacitor."+ },+ {+ "number": "27",+ "name": "AVDD_SYNTH2",+ "type": "power_in",+ "description": "2.0-3.6 V analog power supply input for frequency synthesizer circuit."+ },+ {+ "number": "28",+ "name": "AVDD_XOSC",+ "type": "power_in",+ "description": "2.0-3.6 V analog power supply input for crystal oscillator circuit."+ },+ {+ "number": "29",+ "name": "DCPL_XOSC",+ "type": "power_out",+ "description": "Crystal oscillator regulator decoupling capacitor connection requiring external capacitor."+ },+ {+ "number": "30",+ "name": "XOSC_Q1",+ "type": "passive",+ "description": "Crystal oscillator pin 1, must be grounded if external TCXO or clock is connected to EXT_XOSC."+ },+ {+ "number": "31",+ "name": "XOSC_Q2",+ "type": "passive",+ "description": "Crystal oscillator pin 2, must be left floating if external TCXO or clock is connected to EXT_XOSC."+ },+ {+ "number": "32",+ "name": "EXT_XOSC",+ "type": "input",+ "description": "External clock input, must be grounded if internal crystal is connected to XOSC_Q1 and XOSC_Q2."+ },+ {+ "number": "33",+ "name": "GND",+ "type": "power_in",+ "description": "Ground connection and exposed thermal pad, must be connected to solid ground plane."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "1/33 pins cited to the wrong page (name found elsewhere): ['33:GND@p6']"+ ],+ "pages_sent": 38,+ "cost_usd": 0.3375,+ "at": "2026-10-01T17:21:42"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/cc1125",+ "pages": 38,+ "sha256": "abea680a01c90aee",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 33,+ "described": 33,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}