cbm3485as8

@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "CBM3485AS8",+    "manufacturer": "Corebai Microelectronics",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "RS-485 / RS-422 ICs",+    "parts": {+      "symbol": "cbm3485as8.kicad_sym",+      "footprint": "cbm3485as8.kicad_mod",+      "model_3d": "cbm3485as8-etched.glb",+      "model_3d_plain": "cbm3485as8.glb",+      "model_3d_step": "cbm3485as8-etched.step",+      "model_3d_step_plain": "cbm3485as8.step",+      "lbr": "cbm3485as8.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "RO",+        "type": "output",+        "description": "Receiver output. Drives logic-high (VOH ≥ 2.5V at IO = -1.5mA) when A-B > +0.2V, logic-low (VOL ≤ 0.4V at IO = 2.5mA) when A-B < -0.2V. High-impedance when RE is high; guaranteed logic-high when the differential input is open (fail-safe)."+      },+      {+        "number": "2",+        "name": "RE",+        "type": "input",+        "description": "Receiver output enable, active-low. When low the receiver output RO is enabled; when high RO is placed into a high-impedance (three-state) condition. VIH ≥ 2.0V, VIL ≤ 0.8V; input current ±2µA."+      },+      {+        "number": "3",+        "name": "DE",+        "type": "input",+        "description": "Driver output enable, active-high. When high the differential driver outputs A and B are enabled; when low the outputs are placed into a high-impedance state. VIH ≥ 2.0V, VIL ≤ 0.8V; input current ±2µA."+      },+      {+        "number": "4",+        "name": "DI",+        "type": "input",+        "description": "Driver input. TTL/CMOS-compatible logic input transmitted onto the differential bus (A, B) when DE is asserted. VIH ≥ 2.0V, VIL ≤ 0.8V; input current ±2µA. DI = 1 drives A high / B low; DI = 0 drives A low / B high."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Ground / device 0V reference. All voltages are referenced to this pin."+      },+      {+        "number": "6",+        "name": "A",+        "type": "bidirectional",+        "description": "Non-inverting differential bus I/O. Driver non-inverting output when DE is high; receiver non-inverting input when RE is low. Common-mode range -7V to +12V; input resistance 12kΩ min; receiver differential threshold ±0.2V. ±15kV IEC61000-4-2 air / ±8kV contact ESD on bus pins."+      },+      {+        "number": "7",+        "name": "B",+        "type": "bidirectional",+        "description": "Inverting differential bus I/O. Driver inverting output when DE is high; receiver inverting input when RE is low. Common-mode range -7V to +12V; input resistance 12kΩ min; receiver differential threshold ±0.2V. ±15kV IEC61000-4-2 air / ±8kV contact ESD on bus pins."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply, single 3.3V nominal (3.0V to 3.6V operating). No-load supply current 300µA typ (500µA typ with DE = VCC). Absolute maximum 7V."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}