component
CAT24C04WI-GT3
Public Made by Adomby adom
onsemi EEPROM, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "cat24c04wi-gt3",+ "title": "CAT24C04WI-GT3",+ "brief": "onsemi EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "onsemi EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "memory", "cat24c04wi-gt3" ],+ "component": {+ "mpn": "CAT24C04WI-GT3",+ "manufacturer": "onsemi",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "EEPROM",+ "datasheet": "https://www.onsemi.com/pdf/datasheet/cat24c04wi-gt3-d.pdf",+ "parts": {+ "symbol": "cat24c04wi-gt3.kicad_sym",+ "footprint": "cat24c04wi-gt3.kicad_mod",+ "model_3d": "cat24c04wi-gt3.glb",+ "model_3d_step": "cat24c04wi-gt3.step",+ "lbr": "cat24c04wi-gt3.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No Connect. On the CAT24C04 the A0 address input is not used because internal address bit a8 is derived from the slave address."+ },+ {+ "number": "2",+ "name": "A1",+ "type": "input",+ "description": "Device Address Input bit 1. Sets one of the two external address bits used when cascading up to four CAT24C04 devices on the same I2C bus. Internal weak pull-down to VSS when undriven; typical input current up to 50 uA depending on VCC."+ },+ {+ "number": "3",+ "name": "A2",+ "type": "input",+ "description": "Device Address Input bit 2. Second external slave-address selection pin used when cascading up to four CAT24C04 devices. Internal weak pull-down to VSS when undriven."+ },+ {+ "number": "4",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference for the device (0 V)."+ },+ {+ "number": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "Serial Data I/O for the I2C bus. Open-drain output - requires an external pull-up resistor to VCC. Receives input data and transmits EEPROM read data; output is clocked on the negative edge of SCL."+ },+ {+ "number": "6",+ "name": "SCL",+ "type": "input",+ "description": "Serial Clock Input for the I2C bus. Accepts the clock generated by the master; supports Standard (100 kHz) and Fast (400 kHz) modes. Schmitt-trigger input with noise suppression filter."+ },+ {+ "number": "7",+ "name": "WP",+ "type": "input",+ "description": "Write Protect input. When held HIGH, all write operations to the entire memory array are inhibited. Internal weak pull-down to VSS when undriven; leave HIGH to enable full write protection."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply voltage, 1.7 V to 5.5 V. Absolute maximum 6.5 V referenced to VSS."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.onsemi.com/pdf/datasheet/cat24c04wi-gt3-d.pdf",+ "pages": 23,+ "sha256": "1068a4f09584c5b3",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "onsemi",+ "Package": "SOIC-8",+ "Category": "Memory",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "cat24c04wi-gt3"+ ],+ "discovery_pitch": "CAT24C04WI-GT3 (onsemi) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/cat24c04wi-gt3-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }