ca-is3211vcj

@@ -33,5 +33,66 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "CA-IS3211VCJ",+    "manufacturer": "Chipanalog",+    "package": "SOIC-6-300mil",+    "pin_count": 6,+    "category": "Digital Isolators",+    "parts": {+      "symbol": "ca-is3211vcj.kicad_sym",+      "footprint": "ca-is3211vcj.kicad_mod",+      "model_3d": "ca-is3211vcj-etched.glb",+      "model_3d_plain": "ca-is3211vcj.glb",+      "model_3d_step": "ca-is3211vcj-etched.step",+      "model_3d_step_plain": "ca-is3211vcj.step",+      "lbr": "ca-is3211vcj.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "ANODE",+        "type": "input",+        "description": "Driver input, the anode of the input LED-equivalent diode. Forward current sourced into ANODE (through a series limiting resistor) turns on the gate driver output. Max avg input current 25 mA; max reverse voltage 7 V."+      },+      {+        "number": "2",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to a convenient net; do not use to route signals."+      },+      {+        "number": "3",+        "name": "CATHODE",+        "type": "input",+        "description": "Driver input, the cathode of the input LED-equivalent diode. Current returns through this pin from ANODE; typically pulled low (or to logic driver output) to complete the input current loop."+      },+      {+        "number": "4",+        "name": "VEE",+        "type": "power_in",+        "description": "Negative power supply input for the output-side; the negative output supply rail. For bipolar operation, bypass VEE to output-side ground with 0.1 μF||10 μF as close as possible to the device. For single-supply operation, connect VEE to output-side GND. VCC−VEE range: −0.3 V to 32 V absolute max."+      },+      {+        "number": "5",+        "name": "VOUT",+        "type": "output",+        "description": "Gate driver output. Rail-to-rail output between VCC and VEE, capable of 6 A peak sink / 5 A peak source. Drives the gate of an external power MOSFET, IGBT or SiC transistor; pulled low when VCC is unpowered, open-circuit, or in UVLO."+      },+      {+        "number": "6",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive power supply input for the output-side; the positive output supply rail. Bypass VCC to output-side ground with 0.1 μF||10 μF as close as possible to the device. VCC−VEE operating range 14 V to 30 V for the 12 V UVLO (VCJ) version."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}