component
BTS723GW
Public Made by Adomby adom
Infineon AC-DC Controllers and Regulators, SOIC-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.md+14@@ -38,6 +38,20 @@ BTS723GW from Infineon, in a SOIC-14. Pinout and pin descriptions extracted from - Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm` - 3D model: SOIC-14 (KiCad packages3D, STEP) +## 3D model downloads++Two STEP files. Same geometry, different body top:++| File | Size | Use it when |+|---|---|---|+| [`bts723gw.step`](bts723gw.step) | 195 KB | You want the bare part, or you mark your own boards. |+| [`bts723gw-etched.step`](bts723gw-etched.step) | 2.2 MB | You want the part with `BTS723GW` already on it. |++The marking in the etched file is real recessed geometry cut into the solid, not a+texture or a decal: 541 faces against 237 in the bare model. It+survives export, section views, and rendering in any CAD tool, and it drops straight+into KiCad or Fusion with no extra setup.+ ## Provenance Data extracted from the manufacturer datasheet, not a distributor listing:
package.json+1−1@@ -1,6 +1,6 @@ { "slug": "bts723gw",- "version": "0.1.0",+ "version": "0.2.0", "type": "component", "description": "Infineon AC-DC Controllers and Regulators, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [
page.json+13−13@@ -4,7 +4,7 @@ "slug": "bts723gw", "title": "BTS723GW", "brief": "Infineon AC-DC Controllers and Regulators, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.2.0", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -40,31 +40,31 @@ "number": "2", "name": "IN1", "type": "input",- "description": "Input for channel 1: activates channel 1 on logic-high signal. CMOS-compatible, ground-referenced with integrated 20 k\u03a9 input series resistor. Absolute max input voltage \u00b142 V DC; max input current \u00b12.0 mA DC."+ "description": "Input for channel 1: activates channel 1 on logic-high signal. CMOS-compatible, ground-referenced with integrated 20 kΩ input series resistor. Absolute max input voltage ±42 V DC; max input current ±2.0 mA DC." }, { "number": "3", "name": "ST1", "type": "output",- "description": "Diagnostic feedback for channel 1: open-drain status output. Integrated pull-up via SPU pin; reports open-load (OFF state) and thermal shutdown (ON state). Max status current \u00b12.0 mA DC."+ "description": "Diagnostic feedback for channel 1: open-drain status output. Integrated pull-up via SPU pin; reports open-load (OFF state) and thermal shutdown (ON state). Max status current ±2.0 mA DC." }, { "number": "4", "name": "GND", "type": "power_in",- "description": "Logic ground. Independent from load ground. External current-limit resistor (150 \u03a9 recommended) advised for Vbb > Vbb(AZ)."+ "description": "Logic ground. Independent from load ground. External current-limit resistor (150 Ω recommended) advised for Vbb > Vbb(AZ)." }, { "number": "5", "name": "ST2", "type": "output",- "description": "Diagnostic feedback for channel 2: open-drain status output. Integrated pull-up via SPU pin; reports open-load (OFF state) and thermal shutdown (ON state). Max status current \u00b12.0 mA DC."+ "description": "Diagnostic feedback for channel 2: open-drain status output. Integrated pull-up via SPU pin; reports open-load (OFF state) and thermal shutdown (ON state). Max status current ±2.0 mA DC." }, { "number": "6", "name": "IN2", "type": "input",- "description": "Input for channel 2: activates channel 2 on logic-high signal. CMOS-compatible, ground-referenced with integrated 20 k\u03a9 input series resistor. Absolute max input voltage \u00b142 V DC; max input current \u00b12.0 mA DC."+ "description": "Input for channel 2: activates channel 2 on logic-high signal. CMOS-compatible, ground-referenced with integrated 20 kΩ input series resistor. Absolute max input voltage ±42 V DC; max input current ±2.0 mA DC." }, { "number": "7",@@ -82,7 +82,7 @@ "number": "9", "name": "OUT2", "type": "power_out",- "description": "Protected high-side power output of channel 2. On-state resistance ~90 m\u03a9 typ (each channel, Tj=25\u00b0C); nominal load current 2.9 A (one channel active); current limitation 8 A. Pins 9 and 10 must be connected in parallel for spec operation."+ "description": "Protected high-side power output of channel 2. On-state resistance ~90 mΩ typ (each channel, Tj=25°C); nominal load current 2.9 A (one channel active); current limitation 8 A. Pins 9 and 10 must be connected in parallel for spec operation." }, { "number": "10",@@ -94,13 +94,13 @@ "number": "11", "name": "SPU", "type": "input",- "description": "Status Pull-Up: connection for external pull-up voltage source (max \u00b142 V DC) for the open-drain ST1/ST2 status outputs. Pull-up resistors (~12 k\u03a9 / 850 \u03a9 network) are integrated internally."+ "description": "Status Pull-Up: connection for external pull-up voltage source (max ±42 V DC) for the open-drain ST1/ST2 status outputs. Pull-up resistors (~12 kΩ / 850 Ω network) are integrated internally." }, { "number": "12", "name": "OUT1", "type": "power_out",- "description": "Protected high-side power output of channel 1. On-state resistance ~90 m\u03a9 typ (each channel, Tj=25\u00b0C); nominal load current 2.9 A (one channel active); current limitation 8 A. Pins 12 and 13 must be connected in parallel for spec operation."+ "description": "Protected high-side power output of channel 1. On-state resistance ~90 mΩ typ (each channel, Tj=25°C); nominal load current 2.9 A (one channel active); current limitation 8 A. Pins 12 and 13 must be connected in parallel for spec operation." }, { "number": "13",@@ -186,9 +186,9 @@ "docs/hero.png", "docs/bts723gw-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json" ],- "visibility": {- "public": true- }+ "visibility": "public",+ "description": "Infineon AC-DC Controllers and Regulators, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D." }