component
BTS6163D
Public Made by Adomby adom
Infineon AC-DC Controllers and Regulators, TO-252-4. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -38,25 +38,25 @@ "number": "2", "name": "IN", "type": "input",- "description": "Control input; activates the power switch when pulled low (shorted to ground via R_IN). Required current capability of input switch typ. 1.6 mA (max 2.4 mA); turn-off current max 30 \u00b5A. Under-voltage shutdown at V_bIN \u2248 2.5-3.5 V."+ "description": "Control input; activates the power switch when pulled low (shorted to ground via R_IN). Required current capability of input switch typ. 1.6 mA (max 2.4 mA); turn-off current max 30 µA. Under-voltage shutdown at V_bIN ≈ 2.5-3.5 V." }, { "number": "3", "name": "Vbb", "type": "power_in",- "description": "Positive supply voltage. Operating range 5.5-62 V; absolute max 62 V (48 V for full short-circuit protection); load-dump 70 V. Tab and pin 3 are internally shorted. Integrated series resistor R_bb \u2248 100 \u03a9 in the V_bb line."+ "description": "Positive supply voltage. Operating range 5.5-62 V; absolute max 62 V (48 V for full short-circuit protection); load-dump 70 V. Tab and pin 3 are internally shorted. Integrated series resistor R_bb ≈ 100 Ω in the V_bb line." }, { "number": "Tab", "name": "Vbb", "type": "power_in",- "description": "Exposed thermal tab, internally shorted to pin 3 (Vbb). Provides the primary thermal path; must be soldered to Vbb copper for the specified R_thJA (45-55 K/W on 50\u00d750 mm 1.5 mm FR4 with 6 cm\u00b2 copper)."+ "description": "Exposed thermal tab, internally shorted to pin 3 (Vbb). Provides the primary thermal path; must be soldered to Vbb copper for the specified R_thJA (45-55 K/W on 50×50 mm 1.5 mm FR4 with 6 cm² copper)." }, { "number": "4", "name": "IS", "type": "output",- "description": "Sense/diagnostic output. In normal operation delivers a current proportional to the load current with ratio k_ILIS \u2248 9000 (I_S = I_L / k_ILIS). In fault conditions (overload, overtemperature, short circuit) sources a defined fault current I_IS,fault \u2248 4.0-7.5 mA. Requires external R_IS (typ. 1 k\u03a9) to signal GND; leave open if unused."+ "description": "Sense/diagnostic output. In normal operation delivers a current proportional to the load current with ratio k_ILIS ≈ 9000 (I_S = I_L / k_ILIS). In fault conditions (overload, overtemperature, short circuit) sources a defined fault current I_IS,fault ≈ 4.0-7.5 mA. Requires external R_IS (typ. 1 kΩ) to signal GND; leave open if unused." }, { "number": "5",@@ -126,5 +126,8 @@ "docs/bts6163d-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }