component
BTS441RG
Public Made by Adomby adom
Infineon Others, TO-263-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+5246
README.mdadded+103@@ -0,0 +1,103 @@+# BTS441RG++**Infineon** · Others · TO-263-4++BTS441RG from Infineon, in a TO-263-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Ground pin of the logic and protection circuitry, with operating current IGND of 2 mA typ (4 mA max) at VIN = 5 V, and a 150 Ω external resistor required in the GND connection for reverse battery protection. |+| 2 | IN | input | Ground-referenced CMOS-compatible input with 3.8 kΩ typ input resistance, turn-on threshold 1.2 to 2.2 V, turn-off threshold min 0.8 V, and DC input voltage range -10 to +16 V. |+| 3 | VBB | power_in | Positive supply pin with operating voltage 4.75 V to 41 V (Vbb(on)), 43 V max supply rating, and on-state resistance to OUT of 20 mΩ max at 25 °C. |+| 4 | ST | output | Open-drain diagnostic status output that reports open load in the OFF state and overtemperature, with a low voltage of max 0.4 V at IST = 1.6 mA and a DC current rating of ±5.0 mA. |+| 5 | OUT | power_out | Protected high-side power output to the load, with nominal load current 21 A, current limit 65 A typ, and inductive-load clamp VON(CL) of 43 to 52 V at 25 to 150 °C. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Infineon |+| Package | TO-263-4 |+| Category | Others |+| Pins | 5 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Supply voltage | Vbb | | | 43 | V | Tj=25 °C | 5 |+| Supply voltage for full short circuit protection | Vbb | | | 34 | V | Tj Start=-40 ...+150°C | 5 |+| Load dump protection | VLoad dump | | | 60 | V | VA=13.5 V, RI=2 Ω, RL=0,5 Ω, td=200 ms, IN=low or high | 5 |+| Operating temperature range | Tj | -40 | | 150 | °C | | 5 |+| Storage temperature range | Tstg | -55 | | 150 | °C | | 5 |+| Power dissipation (DC) | Ptot | | | 125 | W | TC≤25°C | 5 |+| Maximal switchable inductance, single pulse | ZL | | | 2.1 | mH | Vbb=12V, Tj,start=150°C, TC=150°C const., IL(ISO)=21 A, RL=0 Ω, EAS=0.7J | 5 |+| ESD capability IN (HBM) | VESD | | | 1 | kV | IN, MIL-STD883D method 3015.7; R=1.5kΩ; C=100pF | 5 |+| ESD capability ST (HBM) | VESD | | | 4 | kV | ST, MIL-STD883D method 3015.7; R=1.5kΩ; C=100pF | 5 |+| ESD capability Out to all other pins shorted (HBM) | VESD | | | 8 | kV | Out to all other pins shorted | 5 |+| Input voltage (DC) | VIN | -10 | | 16 | V | | 5 |+| Current through input pin (DC) | IIN | -2 | | 2 | mA | | 5 |+| Current through status pin (DC) | IST | -5 | | 5 | mA | | 5 |+| Thermal resistance chip - case | RthJC | | | 1 | K/W | | 5 |+| Thermal resistance junction - ambient (free air) | RthJA | | | 75 | K/W | free air | 5 |+| Thermal resistance junction - ambient, SMD | RthJA | | | 33 | K/W | SMD version, device on pcb, 6cm2 copper | 5 |+| On-state resistance | RON | | 15 | 20 | mΩ | IL=2 A, Vbb≥7V, Tj=25 °C | 6 |+| On-state resistance | RON | | 28 | 37 | mΩ | IL=2 A, Vbb≥7V, Tj=150 °C | 6 |+| Nominal load current | IL(ISO) | 17 | 21 | | A | ISO 10483-1, 6.7: VON=0.5V, TC=85°C | 6 |+| Output current while GND disconnected or GND pulled up | IL(GNDhigh) | | | 2 | mA | Vbb=30 V, VIN=0 | 6 |+| Turn-on time | ton | 40 | 90 | 200 | μs | IN to 90% VOUT, RL=12 Ω | 6 |+| Turn-off time | toff | 40 | 110 | 250 | μs | IN to 10% VOUT, RL=12 Ω | 6 |+| Slew rate on | dV/dton | 0.1 | | 1 | V/μs | 10 to 30% VOUT, RL=12 Ω | 6 |+| Slew rate off | -dV/dtoff | 0.1 | | 1 | V/μs | 70 to 40% VOUT, RL=12 Ω | 6 |+| Operating voltage | Vbb(on) | 4.75 | | 41 | V | Tj=-40°C | 6 |+| Operating voltage | Vbb(on) | 4.75 | | 43 | V | Tj=+25°C | 6 |+| Operating voltage | Vbb(on) | 5 | | 43 | V | Tj=+150°C | 6 |+| Overvoltage protection | Vbb(AZ) | 41 | | | V | Ibb=40 mA, Tj=-40°C | 6 |+| Overvoltage protection | Vbb(AZ) | 43 | 47 | 52 | V | Ibb=40 mA, Tj=+25...+150°C | 6 |+| Standby current | Ibb(off) | | 5 | 10 | μA | VIN=0, Tj=-40...+25°C | 6 |+| Standby current | Ibb(off) | | | 10 | μA | VIN=0, Tj=+105°C | 6 |+| Standby current | Ibb(off) | | | 25 | μA | VIN=0, Tj=+150°C | 6 |+| Off-state output current | IL(off) | | 1.5 | 10 | μA | VIN=0 | 6 |+| Operating current (Pin 1) | IGND | | 2 | 4 | mA | VIN=5 V | 6 |+| Current limit | IL(lim) | | | 85 | A | Tj=-40°C | 7 |+| Current limit | IL(lim) | | 65 | | A | Tj=25°C | 7 |+| Current limit | IL(lim) | 40 | | | A | Tj=+150°C | 7 |+| Repetitive short circuit current limit | IL(SCr) | | 55 | | A | Tj=Tjt | 7 |+| Thermal shutdown time | Toff(SC) | | 14 | | ms | Tj,start=25°C | 7 |+| Output clamp (inductive load switch off) | VON(CL) | 41 | | | V | VOUT=Vbb-VON(CL), IL=40 mA, Tj=-40°C | 7 |+| Output clamp (inductive load switch off) | VON(CL) | 43 | 47 | 52 | V | VOUT=Vbb-VON(CL), IL=40 mA, Tj=25..150°C | 7 |+| Thermal overload trip temperature | Tjt | 150 | | | °C | | 7 |+| Thermal hysteresis | ΔTjt | | 10 | | K | | 7 |+| Reverse battery | -Vbb | | | 32 | V | pin 3 to 1, requires 150 Ω resistor in GND connection | 7 |+| Reverse battery voltage drop | -VON(rev) | | 540 | | mV | IL=-2A, Tj=+150°C | 7 |+| Open load detection voltage | VOUT(OL) | 1 | 2 | 4 | V | | 8 |+| Input resistance | RI | 2.5 | 3.8 | 6.5 | kΩ | | 8 |+| Input turn-on threshold voltage | VIN(T+) | 1.2 | | 2.2 | V | | 8 |+| Input turn-off threshold voltage | VIN(T-) | 0.8 | | | V | | 8 |+| Input threshold hysteresis | ΔVIN(T) | | 0.3 | | V | | 8 |+| Off state input current | IIN(off) | 1 | | 15 | μA | VIN=0.4 V | 8 |+| On state input current | IIN(on) | 4.5 | 12 | 24 | μA | VIN=5 V | 8 |+| Delay time for status with open load after switch off | tST delay | | | 500 | μs | | 8 |+| Status zener limit voltage | VST(high) | 5.4 | 6.1 | | V | IST=+1.6 mA | 8 |+| ST low voltage | VST(low) | | | 0.4 | V | IST=+1.6 mA | 8 |++## CAD (KiCad official)++- Symbol: `BTS441RG`+- Footprint: `Package_TO_SOT_SMD:TO-263-4`+- 3D model: TO-263-4 (KiCad packages3D, STEP)+- 3D model files: `bts441rg-etched.step` / `bts441rg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `bts441rg.step` / `bts441rg.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Infineon datasheet](docs/bts441rg-datasheet.pdf) (16 pp, sha256 `5258cb038d177ad2`, retrieved 2026-10-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/bts441rg-datasheet.pdf)
bts441rg-etched.glbadded⋯ 1 unchanged line ⋯
bts441rg-hero.glbadded⋯ 1 unchanged line ⋯
bts441rg-hero.overlay.jsonadded+194@@ -0,0 +1,194 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "BTS441RG",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 5,+ "span_mm": 18.55,+ "dash_mm": 0.45,+ "gap_mm": 0.27,+ "pad_stroke_mm": 0.09+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 5,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 5,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 1.292,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -9.375,+ 5.625,+ -5.0,+ 5.0+ ],+ "pads_bbox_mm": [+ -9.95,+ 6.2,+ -5.4,+ 5.4+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "bts441rg-etched.glb",+ "glb_sha256": "9fb8372b3baaaa2fe88eb8d7c6729f8e039e4b73734056a327b9d2b9c7d099e7",+ "footprint": "bts441rg.kicad_mod",+ "footprint_sha256": "9d8a848eaa47ac9aafc0ba9fc8831035f3224dde38d5e5fceb14f7fe0eab9e58",+ "pins": "page.json component.pins",+ "pins_sha256": "01f1d044fd1183b86bce51e3e6f1c6f2a0c6dfd0a4ef6cbc9696040eec895955"+ },+ "generator": "adom-wiki 1.7.77 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "GND",+ "x": -10.1,+ "y": -3.4,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "IN",+ "x": -10.1,+ "y": -1.7,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "VBB",+ "x": 6.35,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "ST",+ "x": -10.1,+ "y": 1.7,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "OUT",+ "x": -10.1,+ "y": 3.4,+ "align": "right",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -7.65,+ -3.4+ ],+ "size_mm": [+ 4.6,+ 1.1+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -7.65,+ -1.7+ ],+ "size_mm": [+ 4.6,+ 1.1+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ 1.5,+ 0.0+ ],+ "size_mm": [+ 9.4,+ 10.8+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -7.65,+ 1.7+ ],+ "size_mm": [+ 4.6,+ 1.1+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -7.65,+ 3.4+ ],+ "size_mm": [+ 4.6,+ 1.1+ ],+ "rot": 0.0+ }+ ]+}
bts441rg.glbadded⋯ 1 unchanged line ⋯
bts441rg.kicad_modadded+325@@ -0,0 +1,325 @@+(footprint "TO-263-4"+ (version 20260206)+ (generator "kicad-footprint-generator")+ (layer "F.Cu")+ (descr "TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-5-1/")+ (tags "D2PAK DDPAK TO-263 D2PAK-5 TO-263-5 SOT-426")+ (property "Reference" "REF**"+ (at 0 -6.65 0)+ (layer "F.SilkS")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "TO-263-4"+ (at 0 6.65 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "KiLib_Generator" "package/TO_SOT/SMD"+ (at 0 0 0)+ (layer "F.SilkS")+ (hide yes)+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -4.825 -5.2)+ (end -4.825 -4.25)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -4.825 5.2)+ (end -4.825 4.25)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -3.46 -5.2)+ (end -4.825 -5.2)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -3.46 5.2)+ (end -4.825 5.2)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_poly+ (pts+ (xy -7.65 -4.21)+ (xy -7.99 -4.68)+ (xy -7.31 -4.68)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ )+ (fp_rect+ (start -10.2 -5.65)+ (end 6.45 5.65)+ (stroke+ (width 0.05)+ (type solid)+ )+ (fill no)+ (layer "F.CrtYd")+ )+ (fp_line+ (start -9.325 -3.8)+ (end -9.325 -3)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start -9.325 -3)+ (end -4.625 -3)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start -9.325 -2.1)+ (end -9.325 -1.3)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start -9.325 -1.3)+ (end -4.625 -1.3)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start -9.325 1.3)+ (end -9.325 2.1)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start -9.325 2.1)+ (end -4.625 2.1)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start -9.325 3)+ (end -9.325 3.8)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start -9.325 3.8)+ (end -4.625 3.8)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start -4.625 -3.8)+ (end -9.325 -3.8)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start -4.625 -2.1)+ (end -9.325 -2.1)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start -4.625 1.3)+ (end -9.325 1.3)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start -4.625 3)+ (end -9.325 3)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start 4.625 -5)+ (end 5.625 -5)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start 5.625 -5)+ (end 5.625 5)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start 5.625 5)+ (end 4.625 5)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_poly+ (pts+ (xy 4.625 -5)+ (xy 4.625 5)+ (xy -4.625 5)+ (xy -4.625 -4)+ (xy -3.625 -5)+ )+ (stroke+ (width 0.1)+ (type solid)+ )+ (fill no)+ (layer "F.Fab")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (pad "" smd roundrect+ (at -0.925 -2.775)+ (size 4.55 5.25)+ (layers "F.Paste")+ (roundrect_rratio 0.054945)+ )+ (pad "" smd roundrect+ (at -0.925 2.775)+ (size 4.55 5.25)+ (layers "F.Paste")+ (roundrect_rratio 0.054945)+ )+ (pad "" smd roundrect+ (at 3.925 -2.775)+ (size 4.55 5.25)+ (layers "F.Paste")+ (roundrect_rratio 0.054945)+ )+ (pad "" smd roundrect+ (at 3.925 2.775)+ (size 4.55 5.25)+ (layers "F.Paste")+ (roundrect_rratio 0.054945)+ )+ (pad "1" smd roundrect+ (at -7.65 -3.4)+ (size 4.6 1.1)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.227273)+ )+ (pad "2" smd roundrect+ (at -7.65 -1.7)+ (size 4.6 1.1)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.227273)+ )+ (pad "3" smd roundrect+ (at 1.5 0)+ (size 9.4 10.8)+ (layers "F.Cu" "F.Mask")+ (roundrect_rratio 0.026596)+ )+ (pad "4" smd roundrect+ (at -7.65 1.7)+ (size 4.6 1.1)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.227273)+ )+ (pad "5" smd roundrect+ (at -7.65 3.4)+ (size 4.6 1.1)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.227273)+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/TO-263-4.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
bts441rg.kicad_symadded+33@@ -0,0 +1,33 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "BTS441RG" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 7.62 0) (effects (font (size 1.27 1.27))))+ (property "Value" "BTS441RG" (at 0 -7.62 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "BTS441RG_0_1"+ (rectangle (start -12.70 5.08) (end 12.70 -5.08)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "BTS441RG_1_1"+ (pin power_in line (at -17.78 2.54 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 0.00 0) (length 5.08)+ (name "IN" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -2.54 0) (length 5.08)+ (name "VBB" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin power_out line (at 17.78 0.00 180) (length 5.08)+ (name "OUT" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -2.54 180) (length 5.08)+ (name "ST" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
bts441rg.lbradded+134@@ -0,0 +1,134 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="TO-263-4">+ <description>5 pads, 16.1 x 10.8 mm. TO-263/D2PAK/DDPAK SMD package</description>+ <smd name="1" x="-7.6500" y="3.4000" dx="4.6000" dy="1.1000" layer="1" roundness="45"/>+ <smd name="2" x="-7.6500" y="1.7000" dx="4.6000" dy="1.1000" layer="1" roundness="45"/>+ <smd name="3" x="1.5000" y="-0.0000" dx="9.4000" dy="10.8000" layer="1" roundness="5" cream="no"/>+ <smd name="4" x="-7.6500" y="-1.7000" dx="4.6000" dy="1.1000" layer="1" roundness="45"/>+ <smd name="5" x="-7.6500" y="-3.4000" dx="4.6000" dy="1.1000" layer="1" roundness="45"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-7.6500" y="4.2100"/>+ <vertex x="-7.9900" y="4.6800"/>+ <vertex x="-7.3100" y="4.6800"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="4.6250" y="5.0000"/>+ <vertex x="4.6250" y="-5.0000"/>+ <vertex x="-4.6250" y="-5.0000"/>+ <vertex x="-4.6250" y="4.0000"/>+ <vertex x="-3.6250" y="5.0000"/>+ </polygon>+ <wire x1="-4.8250" y1="5.2000" x2="-4.8250" y2="4.2500" width="0.1200" layer="21"/>+ <wire x1="-4.8250" y1="-5.2000" x2="-4.8250" y2="-4.2500" width="0.1200" layer="21"/>+ <wire x1="-3.4600" y1="5.2000" x2="-4.8250" y2="5.2000" width="0.1200" layer="21"/>+ <wire x1="-3.4600" y1="-5.2000" x2="-4.8250" y2="-5.2000" width="0.1200" layer="21"/>+ <wire x1="-9.3250" y1="3.8000" x2="-9.3250" y2="3.0000" width="0.1000" layer="51"/>+ <wire x1="-9.3250" y1="3.0000" x2="-4.6250" y2="3.0000" width="0.1000" layer="51"/>+ <wire x1="-9.3250" y1="2.1000" x2="-9.3250" y2="1.3000" width="0.1000" layer="51"/>+ <wire x1="-9.3250" y1="1.3000" x2="-4.6250" y2="1.3000" width="0.1000" layer="51"/>+ <wire x1="-9.3250" y1="-1.3000" x2="-9.3250" y2="-2.1000" width="0.1000" layer="51"/>+ <wire x1="-9.3250" y1="-2.1000" x2="-4.6250" y2="-2.1000" width="0.1000" layer="51"/>+ <wire x1="-9.3250" y1="-3.0000" x2="-9.3250" y2="-3.8000" width="0.1000" layer="51"/>+ <wire x1="-9.3250" y1="-3.8000" x2="-4.6250" y2="-3.8000" width="0.1000" layer="51"/>+ <wire x1="-4.6250" y1="3.8000" x2="-9.3250" y2="3.8000" width="0.1000" layer="51"/>+ <wire x1="-4.6250" y1="2.1000" x2="-9.3250" y2="2.1000" width="0.1000" layer="51"/>+ <wire x1="-4.6250" y1="-1.3000" x2="-9.3250" y2="-1.3000" width="0.1000" layer="51"/>+ <wire x1="-4.6250" y1="-3.0000" x2="-9.3250" y2="-3.0000" width="0.1000" layer="51"/>+ <wire x1="4.6250" y1="5.0000" x2="5.6250" y2="5.0000" width="0.1000" layer="51"/>+ <wire x1="5.6250" y1="5.0000" x2="5.6250" y2="-5.0000" width="0.1000" layer="51"/>+ <wire x1="5.6250" y1="-5.0000" x2="4.6250" y2="-5.0000" width="0.1000" layer="51"/>+ <text x="0" y="6.300" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-6.300" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="BTS441RG">+ <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>+ <wire x1="12.7" y1="5.08" x2="12.7" y2="-5.08" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="5.08" width="0.254" layer="94"/>+ <text x="0.0000" y="7.6200" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="GND" x="-17.78" y="2.54" length="middle" direction="pwr"/>+ <pin name="IN" x="-17.78" y="0" length="middle" direction="in"/>+ <pin name="VBB" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+ <pin name="OUT" x="17.78" y="0" length="middle" direction="out" rot="R180"/>+ <pin name="ST" x="17.78" y="-2.54" length="middle" direction="out" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="BTS441RG" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="BTS441RG" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="TO-263-4">+ <connects>+ <connect gate="G$1" pin="GND" pad="1"/>+ <connect gate="G$1" pin="IN" pad="2"/>+ <connect gate="G$1" pin="VBB" pad="3"/>+ <connect gate="G$1" pin="OUT" pad="5"/>+ <connect gate="G$1" pin="ST" pad="4"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
bts441rg.stepadded+4101@@ -0,0 +1,4101 @@+ISO-10303-21;+HEADER;+/* TO-263-4.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2023, Ray Benitez+ * + * This work is licensed under the+ * [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),+ * with the following exception:+ * + * To the extent that the creation of electronic designs that use 'Licensed Material' can be+ * considered to be 'Adapted Material', then the copyright holder waives article 3 of the license+ * with respect to these designs and any generated files which use data provided as part of the+ * 'Licensed Material'.+ * + * You are free to use the library data in your own projects without the obligation to share your+ * project files under this or any other license agreement. However, if you wish to distribute+ * these libraries, or parts thereof (including in modified form) as a collection then the exception+ * above does not apply. Please refer to+ * https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification+ * of the exception.+ * + * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * USE 3D CAD DATA AT YOUR OWN RISK+ * DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.+ */++FILE_DESCRIPTION(+/* description */ ('model of TO-263-4'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'TO-263-4.step',+/* time_stamp */ '2023-01-24T23:51:33',+/* author */ ('Ray Benitez','[email protected]'),+/* organization */ ('OCCT'),+/* preprocessor_version */ '',+/* originating_system */ 'KiCAD',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('CQ assembly','CQ assembly','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15),#19);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18);+#16 = CARTESIAN_POINT('',(0.,0.,0.));+#17 = DIRECTION('',(0.,0.,1.));+#18 = DIRECTION('',(1.,0.,-0.));+#19 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3)+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#23)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#20,#21,#22)) REPRESENTATION_CONTEXT('Context #1',+'3D Context with UNIT and UNCERTAINTY') );+#20 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#21 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#22 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#23 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#20,+'distance_accuracy_value','confusion accuracy');+#24 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#25 = SHAPE_DEFINITION_REPRESENTATION(#26,#32);+#26 = PRODUCT_DEFINITION_SHAPE('','',#27);+#27 = PRODUCT_DEFINITION('design','',#28,#31);+#28 = PRODUCT_DEFINITION_FORMATION('','',#29);+#29 = PRODUCT('a648ce32-9c39-11ed-93f0-dde97e994e83',+'a648ce32-9c39-11ed-93f0-dde97e994e83','',(#30));+#30 = PRODUCT_CONTEXT('',#2,'mechanical');+#31 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#32 = SHAPE_REPRESENTATION('',(#11,#33,#37,#41),#45);+#33 = AXIS2_PLACEMENT_3D('',#34,#35,#36);+#34 = CARTESIAN_POINT('',(0.,0.,0.));+#35 = DIRECTION('',(0.,0.,1.));+#36 = DIRECTION('',(1.,0.,-0.));+#37 = AXIS2_PLACEMENT_3D('',#38,#39,#40);+#38 = CARTESIAN_POINT('',(0.,0.,0.));+#39 = DIRECTION('',(0.,0.,1.));+#40 = DIRECTION('',(1.,0.,-0.));+#41 = AXIS2_PLACEMENT_3D('',#42,#43,#44);+#42 = CARTESIAN_POINT('',(0.,0.,0.));+#43 = DIRECTION('',(0.,0.,1.));+#44 = DIRECTION('',(1.,0.,-0.));+#45 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3)+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#49)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#46,#47,#48)) REPRESENTATION_CONTEXT('Context #1',+'3D Context with UNIT and UNCERTAINTY') );+#46 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#47 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#48 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#49 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#46,+'distance_accuracy_value','confusion accuracy');+#50 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#51,#53);+#51 = ( REPRESENTATION_RELATIONSHIP('','',#32,#10)+REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#52)+SHAPE_REPRESENTATION_RELATIONSHIP() );+#52 = ITEM_DEFINED_TRANSFORMATION('','',#11,#15);+#53 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',#54);+#54 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('84','','',#5,#27,$);+#55 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#29));+#56 = SHAPE_DEFINITION_REPRESENTATION(#57,#63);+#57 = PRODUCT_DEFINITION_SHAPE('','',#58);+#58 = PRODUCT_DEFINITION('design','',#59,#62);+#59 = PRODUCT_DEFINITION_FORMATION('','',#60);+#60 = PRODUCT('a648ce33-9c39-11ed-93f0-dde97e994e83',+'a648ce33-9c39-11ed-93f0-dde97e994e83','',(#61));+#61 = PRODUCT_CONTEXT('',#2,'mechanical');+#62 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#63 = SHAPE_REPRESENTATION('',(#11,#64),#68);+#64 = AXIS2_PLACEMENT_3D('',#65,#66,#67);+#65 = CARTESIAN_POINT('',(0.,0.,0.));+#66 = DIRECTION('',(0.,0.,1.));+#67 = DIRECTION('',(1.,0.,-0.));+#68 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3)+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#72)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#69,#70,#71)) REPRESENTATION_CONTEXT('Context #1',+'3D Context with UNIT and UNCERTAINTY') );+#69 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#70 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#71 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#72 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#69,+'distance_accuracy_value','confusion accuracy');+#73 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#74,#76);+#74 = ( REPRESENTATION_RELATIONSHIP('','',#63,#32)+REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#75)+SHAPE_REPRESENTATION_RELATIONSHIP() );+#75 = ITEM_DEFINED_TRANSFORMATION('','',#11,#33);+#76 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',#77);+#77 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('79','','',#27,#58,$);+#78 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#60));+#79 = SHAPE_DEFINITION_REPRESENTATION(#80,#86);+#80 = PRODUCT_DEFINITION_SHAPE('','',#81);+#81 = PRODUCT_DEFINITION('design','',#82,#85);+#82 = PRODUCT_DEFINITION_FORMATION('','',#83);+#83 = PRODUCT('a648ce33-9c39-11ed-93f0-dde97e994e83_part',+'a648ce33-9c39-11ed-93f0-dde97e994e83_part','',(#84));+#84 = PRODUCT_CONTEXT('',#2,'mechanical');+#85 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#86 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#87),#429);+#87 = MANIFOLD_SOLID_BREP('',#88);+#88 = CLOSED_SHELL('',(#89,#129,#176,#200,#231,#271,#295,#312,#343,#355,+#383,#395,#420));+#89 = ADVANCED_FACE('',(#90),#124,.F.);+#90 = FACE_BOUND('',#91,.F.);+#91 = EDGE_LOOP('',(#92,#102,#110,#118));+#92 = ORIENTED_EDGE('',*,*,#93,.T.);+#93 = EDGE_CURVE('',#94,#96,#98,.T.);+#94 = VERTEX_POINT('',#95);+#95 = CARTESIAN_POINT('',(-4.625,5.,2.4));+#96 = VERTEX_POINT('',#97);+#97 = CARTESIAN_POINT('',(-4.625,5.,2.42));+#98 = LINE('',#99,#100);+#99 = CARTESIAN_POINT('',(-4.625,5.,2.E-02));+#100 = VECTOR('',#101,1.);+#101 = DIRECTION('',(0.,0.,1.));+#102 = ORIENTED_EDGE('',*,*,#103,.T.);+#103 = EDGE_CURVE('',#96,#104,#106,.T.);+#104 = VERTEX_POINT('',#105);+#105 = CARTESIAN_POINT('',(-4.625,-5.,2.42));+#106 = LINE('',#107,#108);+#107 = CARTESIAN_POINT('',(-4.625,5.,2.42));+#108 = VECTOR('',#109,1.);+#109 = DIRECTION('',(0.,-1.,0.));+#110 = ORIENTED_EDGE('',*,*,#111,.F.);+#111 = EDGE_CURVE('',#112,#104,#114,.T.);+#112 = VERTEX_POINT('',#113);+#113 = CARTESIAN_POINT('',(-4.625,-5.,2.4));+#114 = LINE('',#115,#116);+#115 = CARTESIAN_POINT('',(-4.625,-5.,2.E-02));+#116 = VECTOR('',#117,1.);+#117 = DIRECTION('',(0.,0.,1.));+#118 = ORIENTED_EDGE('',*,*,#119,.F.);+#119 = EDGE_CURVE('',#94,#112,#120,.T.);+#120 = LINE('',#121,#122);+#121 = CARTESIAN_POINT('',(-4.625,5.,2.4));+#122 = VECTOR('',#123,1.);+#123 = DIRECTION('',(0.,-1.,0.));+#124 = PLANE('',#125);+#125 = AXIS2_PLACEMENT_3D('',#126,#127,#128);+#126 = CARTESIAN_POINT('',(-4.625,5.,2.E-02));+#127 = DIRECTION('',(1.,0.,-0.));+#128 = DIRECTION('',(0.,-1.,0.));+#129 = ADVANCED_FACE('',(#130),#171,.F.);+#130 = FACE_BOUND('',#131,.F.);+#131 = EDGE_LOOP('',(#132,#133,#141,#149,#157,#165));+#132 = ORIENTED_EDGE('',*,*,#93,.F.);+#133 = ORIENTED_EDGE('',*,*,#134,.T.);+#134 = EDGE_CURVE('',#94,#135,#137,.T.);+#135 = VERTEX_POINT('',#136);+#136 = CARTESIAN_POINT('',(-4.425,5.,2.E-02));+#137 = LINE('',#138,#139);+#138 = CARTESIAN_POINT('',(-4.443270107286,5.,0.237414276699));+#139 = VECTOR('',#140,1.);+#140 = DIRECTION('',(8.373846778277E-02,0.,-0.996487766615));+#141 = ORIENTED_EDGE('',*,*,#142,.F.);+#142 = EDGE_CURVE('',#143,#135,#145,.T.);+#143 = VERTEX_POINT('',#144);+#144 = CARTESIAN_POINT('',(4.625,5.,2.E-02));+#145 = LINE('',#146,#147);+#146 = CARTESIAN_POINT('',(4.625,5.,2.E-02));+#147 = VECTOR('',#148,1.);+#148 = DIRECTION('',(-1.,0.,0.));+#149 = ORIENTED_EDGE('',*,*,#150,.T.);+#150 = EDGE_CURVE('',#143,#151,#153,.T.);+#151 = VERTEX_POINT('',#152);+#152 = CARTESIAN_POINT('',(4.625,5.,1.29));+#153 = LINE('',#154,#155);+#154 = CARTESIAN_POINT('',(4.625,5.,2.E-02));+#155 = VECTOR('',#156,1.);+#156 = DIRECTION('',(0.,0.,1.));+#157 = ORIENTED_EDGE('',*,*,#158,.T.);+#158 = EDGE_CURVE('',#151,#159,#161,.T.);+#159 = VERTEX_POINT('',#160);+#160 = CARTESIAN_POINT('',(4.444488817891,5.,2.42));+#161 = LINE('',#162,#163);+#162 = CARTESIAN_POINT('',(4.598913595238,5.,1.453300893808));+#163 = VECTOR('',#164,1.);+#164 = DIRECTION('',(-0.157744405085,-0.,0.98747997583));+#165 = ORIENTED_EDGE('',*,*,#166,.T.);+#166 = EDGE_CURVE('',#159,#96,#167,.T.);+#167 = LINE('',#168,#169);+#168 = CARTESIAN_POINT('',(4.125,5.,2.42));+#169 = VECTOR('',#170,1.);+#170 = DIRECTION('',(-1.,0.,0.));+#171 = PLANE('',#172);+#172 = AXIS2_PLACEMENT_3D('',#173,#174,#175);+#173 = CARTESIAN_POINT('',(4.625,5.,2.E-02));+#174 = DIRECTION('',(0.,-1.,0.));+#175 = DIRECTION('',(-1.,0.,0.));+#176 = ADVANCED_FACE('',(#177),#195,.T.);+#177 = FACE_BOUND('',#178,.F.);+#178 = EDGE_LOOP('',(#179,#180,#181,#189));+#179 = ORIENTED_EDGE('',*,*,#134,.F.);+#180 = ORIENTED_EDGE('',*,*,#119,.T.);+#181 = ORIENTED_EDGE('',*,*,#182,.T.);+#182 = EDGE_CURVE('',#112,#183,#185,.T.);+#183 = VERTEX_POINT('',#184);+#184 = CARTESIAN_POINT('',(-4.425,-5.,2.E-02));+#185 = LINE('',#186,#187);+#186 = CARTESIAN_POINT('',(-4.475701213099,-5.,0.623344435874));+#187 = VECTOR('',#188,1.);+#188 = DIRECTION('',(8.373846778277E-02,-0.,-0.996487766615));+#189 = ORIENTED_EDGE('',*,*,#190,.F.);+#190 = EDGE_CURVE('',#135,#183,#191,.T.);+#191 = LINE('',#192,#193);+#192 = CARTESIAN_POINT('',(-4.425,5.,2.E-02));+#193 = VECTOR('',#194,1.);+#194 = DIRECTION('',(0.,-1.,0.));+#195 = PLANE('',#196);+#196 = AXIS2_PLACEMENT_3D('',#197,#198,#199);+#197 = CARTESIAN_POINT('',(-4.525,5.,1.21));+#198 = DIRECTION('',(-0.996487766615,0.,-8.373846778277E-02));+#199 = DIRECTION('',(-0.,1.,0.));+#200 = ADVANCED_FACE('',(#201),#226,.F.);+#201 = FACE_BOUND('',#202,.F.);+#202 = EDGE_LOOP('',(#203,#213,#219,#220));+#203 = ORIENTED_EDGE('',*,*,#204,.T.);+#204 = EDGE_CURVE('',#205,#207,#209,.T.);+#205 = VERTEX_POINT('',#206);+#206 = CARTESIAN_POINT('',(-4.125,4.5,4.42));+#207 = VERTEX_POINT('',#208);+#208 = CARTESIAN_POINT('',(-4.125,-4.5,4.42));+#209 = LINE('',#210,#211);+#210 = CARTESIAN_POINT('',(-4.125,5.,4.42));+#211 = VECTOR('',#212,1.);+#212 = DIRECTION('',(0.,-1.,0.));+#213 = ORIENTED_EDGE('',*,*,#214,.T.);+#214 = EDGE_CURVE('',#207,#104,#215,.T.);+#215 = LINE('',#216,#217);+#216 = CARTESIAN_POINT('',(-4.097222222222,-4.472222222222,+4.531111111111));+#217 = VECTOR('',#218,1.);+#218 = DIRECTION('',(-0.235702260396,-0.235702260396,-0.942809041582));+#219 = ORIENTED_EDGE('',*,*,#103,.F.);+#220 = ORIENTED_EDGE('',*,*,#221,.F.);+#221 = EDGE_CURVE('',#205,#96,#222,.T.);+#222 = LINE('',#223,#224);+#223 = CARTESIAN_POINT('',(-4.145833333333,4.520833333333,4.336666666667+));+#224 = VECTOR('',#225,1.);+#225 = DIRECTION('',(-0.235702260396,0.235702260396,-0.942809041582));+#226 = PLANE('',#227);+#227 = AXIS2_PLACEMENT_3D('',#228,#229,#230);+#228 = CARTESIAN_POINT('',(-4.375,5.,3.42));+#229 = DIRECTION('',(0.970142500145,7.084811160193E-18,-0.242535625036)+);+#230 = DIRECTION('',(6.873276412007E-18,-1.,-1.718319103002E-18));+#231 = ADVANCED_FACE('',(#232),#266,.F.);+#232 = FACE_BOUND('',#233,.F.);+#233 = EDGE_LOOP('',(#234,#235,#243,#251,#259,#265));+#234 = ORIENTED_EDGE('',*,*,#111,.T.);+#235 = ORIENTED_EDGE('',*,*,#236,.T.);+#236 = EDGE_CURVE('',#104,#237,#239,.T.);+#237 = VERTEX_POINT('',#238);+#238 = CARTESIAN_POINT('',(4.444488817891,-5.,2.42));+#239 = LINE('',#240,#241);+#240 = CARTESIAN_POINT('',(-4.125,-5.,2.42));+#241 = VECTOR('',#242,1.);+#242 = DIRECTION('',(1.,0.,0.));+#243 = ORIENTED_EDGE('',*,*,#244,.F.);+#244 = EDGE_CURVE('',#245,#237,#247,.T.);+#245 = VERTEX_POINT('',#246);+#246 = CARTESIAN_POINT('',(4.625,-5.,1.29));+#247 = LINE('',#248,#249);+#248 = CARTESIAN_POINT('',(4.483828345062,-5.,2.173734559914));+#249 = VECTOR('',#250,1.);+#250 = DIRECTION('',(-0.157744405085,0.,0.98747997583));+#251 = ORIENTED_EDGE('',*,*,#252,.F.);+#252 = EDGE_CURVE('',#253,#245,#255,.T.);+#253 = VERTEX_POINT('',#254);+#254 = CARTESIAN_POINT('',(4.625,-5.,2.E-02));+#255 = LINE('',#256,#257);+#256 = CARTESIAN_POINT('',(4.625,-5.,2.E-02));+#257 = VECTOR('',#258,1.);+#258 = DIRECTION('',(0.,0.,1.));+#259 = ORIENTED_EDGE('',*,*,#260,.F.);+#260 = EDGE_CURVE('',#183,#253,#261,.T.);+#261 = LINE('',#262,#263);+#262 = CARTESIAN_POINT('',(-4.625,-5.,2.E-02));+#263 = VECTOR('',#264,1.);+#264 = DIRECTION('',(1.,0.,0.));+#265 = ORIENTED_EDGE('',*,*,#182,.F.);+#266 = PLANE('',#267);+#267 = AXIS2_PLACEMENT_3D('',#268,#269,#270);+#268 = CARTESIAN_POINT('',(-4.625,-5.,2.E-02));+#269 = DIRECTION('',(0.,1.,0.));+#270 = DIRECTION('',(1.,0.,0.));+#271 = ADVANCED_FACE('',(#272),#290,.F.);+#272 = FACE_BOUND('',#273,.F.);+#273 = EDGE_LOOP('',(#274,#282,#288,#289));+#274 = ORIENTED_EDGE('',*,*,#275,.F.);+#275 = EDGE_CURVE('',#276,#159,#278,.T.);+#276 = VERTEX_POINT('',#277);+#277 = CARTESIAN_POINT('',(4.125,4.5,4.42));+#278 = LINE('',#279,#280);+#279 = CARTESIAN_POINT('',(4.14646794467,4.533597333408,4.285610666366)+);+#280 = VECTOR('',#281,1.);+#281 = DIRECTION('',(0.153146674761,0.239674546001,-0.958698184002));+#282 = ORIENTED_EDGE('',*,*,#283,.T.);+#283 = EDGE_CURVE('',#276,#205,#284,.T.);+#284 = LINE('',#285,#286);+#285 = CARTESIAN_POINT('',(4.125,4.5,4.42));+#286 = VECTOR('',#287,1.);+#287 = DIRECTION('',(-1.,0.,0.));+#288 = ORIENTED_EDGE('',*,*,#221,.T.);+#289 = ORIENTED_EDGE('',*,*,#166,.F.);+#290 = PLANE('',#291);+#291 = AXIS2_PLACEMENT_3D('',#292,#293,#294);+#292 = CARTESIAN_POINT('',(4.125,4.75,3.42));+#293 = DIRECTION('',(7.084811160193E-18,-0.970142500145,-0.242535625036)+);+#294 = DIRECTION('',(-1.,-6.873276412007E-18,-1.718319103002E-18));+#295 = ADVANCED_FACE('',(#296),#307,.F.);+#296 = FACE_BOUND('',#297,.F.);+#297 = EDGE_LOOP('',(#298,#299,#305,#306));+#298 = ORIENTED_EDGE('',*,*,#260,.T.);+#299 = ORIENTED_EDGE('',*,*,#300,.T.);+#300 = EDGE_CURVE('',#253,#143,#301,.T.);+#301 = LINE('',#302,#303);+#302 = CARTESIAN_POINT('',(4.625,-5.,2.E-02));+#303 = VECTOR('',#304,1.);+#304 = DIRECTION('',(0.,1.,0.));+#305 = ORIENTED_EDGE('',*,*,#142,.T.);+#306 = ORIENTED_EDGE('',*,*,#190,.T.);+#307 = PLANE('',#308);+#308 = AXIS2_PLACEMENT_3D('',#309,#310,#311);+#309 = CARTESIAN_POINT('',(0.,0.,2.E-02));+#310 = DIRECTION('',(0.,0.,1.));+#311 = DIRECTION('',(1.,0.,-0.));+#312 = ADVANCED_FACE('',(#313),#338,.F.);+#313 = FACE_BOUND('',#314,.T.);+#314 = EDGE_LOOP('',(#315,#323,#329,#330,#336,#337));+#315 = ORIENTED_EDGE('',*,*,#316,.F.);+#316 = EDGE_CURVE('',#317,#276,#319,.T.);+#317 = VERTEX_POINT('',#318);+#318 = CARTESIAN_POINT('',(4.125,-4.5,4.42));+#319 = LINE('',#320,#321);+#320 = CARTESIAN_POINT('',(4.125,-5.,4.42));+#321 = VECTOR('',#322,1.);+#322 = DIRECTION('',(0.,1.,0.));+#323 = ORIENTED_EDGE('',*,*,#324,.T.);+#324 = EDGE_CURVE('',#317,#237,#325,.T.);+#325 = LINE('',#326,#327);+#326 = CARTESIAN_POINT('',(4.233247389434,-4.669407164464,3.742371342144+));+#327 = VECTOR('',#328,1.);+#328 = DIRECTION('',(0.153146674761,-0.239674546001,-0.958698184002));+#329 = ORIENTED_EDGE('',*,*,#244,.F.);+#330 = ORIENTED_EDGE('',*,*,#331,.T.);+#331 = EDGE_CURVE('',#245,#151,#332,.T.);+#332 = LINE('',#333,#334);+#333 = CARTESIAN_POINT('',(4.625,-5.,1.29));+#334 = VECTOR('',#335,1.);+#335 = DIRECTION('',(0.,1.,0.));+#336 = ORIENTED_EDGE('',*,*,#158,.T.);+#337 = ORIENTED_EDGE('',*,*,#275,.F.);+#338 = PLANE('',#339);+#339 = AXIS2_PLACEMENT_3D('',#340,#341,#342);+#340 = CARTESIAN_POINT('',(4.375,-5.,2.855));+#341 = DIRECTION('',(-0.98747997583,7.27912460391E-18,-0.157744405085));+#342 = DIRECTION('',(-7.18798978793E-18,-1.,-1.14824118018E-18));+#343 = ADVANCED_FACE('',(#344),#350,.F.);+#344 = FACE_BOUND('',#345,.F.);+#345 = EDGE_LOOP('',(#346,#347,#348,#349));+#346 = ORIENTED_EDGE('',*,*,#252,.T.);+#347 = ORIENTED_EDGE('',*,*,#331,.T.);+#348 = ORIENTED_EDGE('',*,*,#150,.F.);+#349 = ORIENTED_EDGE('',*,*,#300,.F.);+#350 = PLANE('',#351);+#351 = AXIS2_PLACEMENT_3D('',#352,#353,#354);+#352 = CARTESIAN_POINT('',(4.625,-5.,2.E-02));+#353 = DIRECTION('',(-1.,0.,0.));+#354 = DIRECTION('',(0.,1.,0.));+#355 = ADVANCED_FACE('',(#356,#367),#378,.T.);+#356 = FACE_BOUND('',#357,.T.);+#357 = EDGE_LOOP('',(#358,#359,#365,#366));+#358 = ORIENTED_EDGE('',*,*,#204,.T.);+#359 = ORIENTED_EDGE('',*,*,#360,.T.);+#360 = EDGE_CURVE('',#207,#317,#361,.T.);+#361 = LINE('',#362,#363);+#362 = CARTESIAN_POINT('',(-4.125,-4.5,4.42));+#363 = VECTOR('',#364,1.);+#364 = DIRECTION('',(1.,0.,0.));+#365 = ORIENTED_EDGE('',*,*,#316,.T.);+#366 = ORIENTED_EDGE('',*,*,#283,.T.);+#367 = FACE_BOUND('',#368,.T.);+#368 = EDGE_LOOP('',(#369));+#369 = ORIENTED_EDGE('',*,*,#370,.T.);+#370 = EDGE_CURVE('',#371,#371,#373,.T.);+#371 = VERTEX_POINT('',#372);+#372 = CARTESIAN_POINT('',(-1.25,-4.138196900535E-16,4.42));+#373 = CIRCLE('',#374,1.25);+#374 = AXIS2_PLACEMENT_3D('',#375,#376,#377);+#375 = CARTESIAN_POINT('',(-4.683753385137E-17,-1.076579902667E-16,4.42)+);+#376 = DIRECTION('',(0.,0.,-1.));+#377 = DIRECTION('',(-1.,0.,0.));+#378 = PLANE('',#379);+#379 = AXIS2_PLACEMENT_3D('',#380,#381,#382);+#380 = CARTESIAN_POINT('',(0.,0.,4.42));+#381 = DIRECTION('',(0.,0.,1.));+#382 = DIRECTION('',(1.,0.,-0.));+#383 = ADVANCED_FACE('',(#384),#390,.F.);+#384 = FACE_BOUND('',#385,.F.);+#385 = EDGE_LOOP('',(#386,#387,#388,#389));+#386 = ORIENTED_EDGE('',*,*,#214,.F.);+#387 = ORIENTED_EDGE('',*,*,#360,.T.);+#388 = ORIENTED_EDGE('',*,*,#324,.T.);+#389 = ORIENTED_EDGE('',*,*,#236,.F.);+#390 = PLANE('',#391);+#391 = AXIS2_PLACEMENT_3D('',#392,#393,#394);+#392 = CARTESIAN_POINT('',(-4.125,-4.75,3.42));+#393 = DIRECTION('',(-7.084811160193E-18,0.970142500145,-0.242535625036)+);+#394 = DIRECTION('',(1.,6.873276412007E-18,-1.718319103002E-18));+#395 = ADVANCED_FACE('',(#396),#415,.F.);+#396 = FACE_BOUND('',#397,.F.);+#397 = EDGE_LOOP('',(#398,#407,#413,#414));+#398 = ORIENTED_EDGE('',*,*,#399,.F.);+#399 = EDGE_CURVE('',#400,#400,#402,.T.);+#400 = VERTEX_POINT('',#401);+#401 = CARTESIAN_POINT('',(-1.25,-4.138196900535E-16,4.32));+#402 = CIRCLE('',#403,1.25);+#403 = AXIS2_PLACEMENT_3D('',#404,#405,#406);+#404 = CARTESIAN_POINT('',(-4.683753385137E-17,-1.076579902667E-16,4.32)+);+#405 = DIRECTION('',(0.,0.,-1.));+#406 = DIRECTION('',(-1.,0.,0.));+#407 = ORIENTED_EDGE('',*,*,#408,.F.);+#408 = EDGE_CURVE('',#371,#400,#409,.T.);+#409 = LINE('',#410,#411);+#410 = CARTESIAN_POINT('',(-1.25,-4.138196900535E-16,4.42));+#411 = VECTOR('',#412,1.);+#412 = DIRECTION('',(0.,0.,-1.));+#413 = ORIENTED_EDGE('',*,*,#370,.T.);+#414 = ORIENTED_EDGE('',*,*,#408,.T.);+#415 = CYLINDRICAL_SURFACE('',#416,1.25);+#416 = AXIS2_PLACEMENT_3D('',#417,#418,#419);+#417 = CARTESIAN_POINT('',(-4.683753385137E-17,-1.076579902667E-16,4.42)+);+#418 = DIRECTION('',(0.,0.,-1.));+#419 = DIRECTION('',(-1.,0.,0.));+#420 = ADVANCED_FACE('',(#421),#424,.F.);+#421 = FACE_BOUND('',#422,.F.);+#422 = EDGE_LOOP('',(#423));+#423 = ORIENTED_EDGE('',*,*,#399,.T.);+#424 = PLANE('',#425);+#425 = AXIS2_PLACEMENT_3D('',#426,#427,#428);+#426 = CARTESIAN_POINT('',(-4.683753385137E-17,-1.076579902667E-16,4.32)+);+#427 = DIRECTION('',(0.,0.,-1.));+#428 = DIRECTION('',(-1.,0.,0.));+#429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3)+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#433)) GLOBAL_UNIT_ASSIGNED_CONTEXT+((#430,#431,#432)) REPRESENTATION_CONTEXT('Context #1',+'3D Context with UNIT and UNCERTAINTY') );+#430 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#431 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#432 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#433 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#430,+'distance_accuracy_value','confusion accuracy');+#434 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#435,#437);+#435 = ( REPRESENTATION_RELATIONSHIP('','',#86,#63)+REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#436)+SHAPE_REPRESENTATION_RELATIONSHIP() );+#436 = ITEM_DEFINED_TRANSFORMATION('','',#11,#64);+#437 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',#438+);+#438 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('78','','',#58,#81,$);+#439 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#83));+#440 = SHAPE_DEFINITION_REPRESENTATION(#441,#447);+#441 = PRODUCT_DEFINITION_SHAPE('','',#442);+#442 = PRODUCT_DEFINITION('design','',#443,#446);+#443 = PRODUCT_DEFINITION_FORMATION('','',#444);+#444 = PRODUCT('a648ce34-9c39-11ed-93f0-dde97e994e83',+'a648ce34-9c39-11ed-93f0-dde97e994e83','',(#445));+#445 = PRODUCT_CONTEXT('',#2,'mechanical');+#446 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#447 = SHAPE_REPRESENTATION('',(#11,#448),#452);+#448 = AXIS2_PLACEMENT_3D('',#449,#450,#451);+#449 = CARTESIAN_POINT('',(0.,0.,0.));+#450 = DIRECTION('',(0.,0.,1.));+#451 = DIRECTION('',(1.,0.,-0.));+#452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3)+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#456)) GLOBAL_UNIT_ASSIGNED_CONTEXT+((#453,#454,#455)) REPRESENTATION_CONTEXT('Context #1',+'3D Context with UNIT and UNCERTAINTY') );+#453 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#454 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#455 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#456 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#453,+'distance_accuracy_value','confusion accuracy');+#457 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#458,#460);+#458 = ( REPRESENTATION_RELATIONSHIP('','',#447,#32)+REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#459)+SHAPE_REPRESENTATION_RELATIONSHIP() );+#459 = ITEM_DEFINED_TRANSFORMATION('','',#11,#37);+#460 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',#461+);+#461 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('81','','',#27,#442,$);+#462 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#444));+#463 = SHAPE_DEFINITION_REPRESENTATION(#464,#470);+#464 = PRODUCT_DEFINITION_SHAPE('','',#465);+#465 = PRODUCT_DEFINITION('design','',#466,#469);+#466 = PRODUCT_DEFINITION_FORMATION('','',#467);+#467 = PRODUCT('a648ce34-9c39-11ed-93f0-dde97e994e83_part',+'a648ce34-9c39-11ed-93f0-dde97e994e83_part','',(#468));+#468 = PRODUCT_CONTEXT('',#2,'mechanical');+#469 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#470 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#471),#819);+#471 = MANIFOLD_SOLID_BREP('',#472);+#472 = CLOSED_SHELL('',(#473,#513,#544,#575,#606,#637,#668,#699,#730,+#761,#783,#801));+#473 = ADVANCED_FACE('',(#474),#508,.T.);+#474 = FACE_BOUND('',#475,.T.);+#475 = EDGE_LOOP('',(#476,#486,#494,#502));+#476 = ORIENTED_EDGE('',*,*,#477,.F.);+#477 = EDGE_CURVE('',#478,#480,#482,.T.);+#478 = VERTEX_POINT('',#479);+#479 = CARTESIAN_POINT('',(5.625,-3.5,0.));+#480 = VERTEX_POINT('',#481);+#481 = CARTESIAN_POINT('',(5.625,-3.5,1.27));+#482 = LINE('',#483,#484);+#483 = CARTESIAN_POINT('',(5.625,-3.5,0.));+#484 = VECTOR('',#485,1.);+#485 = DIRECTION('',(0.,0.,1.));+#486 = ORIENTED_EDGE('',*,*,#487,.T.);+#487 = EDGE_CURVE('',#478,#488,#490,.T.);+#488 = VERTEX_POINT('',#489);+#489 = CARTESIAN_POINT('',(5.625,3.5,0.));+#490 = LINE('',#491,#492);+#491 = CARTESIAN_POINT('',(5.625,-3.5,0.));+#492 = VECTOR('',#493,1.);+#493 = DIRECTION('',(0.,1.,0.));+#494 = ORIENTED_EDGE('',*,*,#495,.T.);+#495 = EDGE_CURVE('',#488,#496,#498,.T.);+#496 = VERTEX_POINT('',#497);+#497 = CARTESIAN_POINT('',(5.625,3.5,1.27));+#498 = LINE('',#499,#500);+#499 = CARTESIAN_POINT('',(5.625,3.5,0.));+#500 = VECTOR('',#501,1.);+#501 = DIRECTION('',(0.,0.,1.));+#502 = ORIENTED_EDGE('',*,*,#503,.T.);+#503 = EDGE_CURVE('',#496,#480,#504,.T.);+#504 = LINE('',#505,#506);+#505 = CARTESIAN_POINT('',(5.625,3.5,1.27));+#506 = VECTOR('',#507,1.);+#507 = DIRECTION('',(0.,-1.,0.));+#508 = PLANE('',#509);+#509 = AXIS2_PLACEMENT_3D('',#510,#511,#512);+#510 = CARTESIAN_POINT('',(5.625,0.,0.));+#511 = DIRECTION('',(1.,0.,-0.));+#512 = DIRECTION('',(0.,-1.,0.));+#513 = ADVANCED_FACE('',(#514),#539,.T.);+#514 = FACE_BOUND('',#515,.T.);+#515 = EDGE_LOOP('',(#516,#517,#525,#533));+#516 = ORIENTED_EDGE('',*,*,#477,.T.);+#517 = ORIENTED_EDGE('',*,*,#518,.T.);+#518 = EDGE_CURVE('',#480,#519,#521,.T.);+#519 = VERTEX_POINT('',#520);+#520 = CARTESIAN_POINT('',(5.325,-5.,1.27));+#521 = LINE('',#522,#523);+#522 = CARTESIAN_POINT('',(5.625,-3.5,1.27));+#523 = VECTOR('',#524,1.);+#524 = DIRECTION('',(-0.196116135138,-0.980580675691,0.));+#525 = ORIENTED_EDGE('',*,*,#526,.F.);+#526 = EDGE_CURVE('',#527,#519,#529,.T.);+#527 = VERTEX_POINT('',#528);+#528 = CARTESIAN_POINT('',(5.325,-5.,0.));+#529 = LINE('',#530,#531);+#530 = CARTESIAN_POINT('',(5.325,-5.,0.));+#531 = VECTOR('',#532,1.);+#532 = DIRECTION('',(0.,0.,1.));+#533 = ORIENTED_EDGE('',*,*,#534,.F.);+#534 = EDGE_CURVE('',#478,#527,#535,.T.);+#535 = LINE('',#536,#537);+#536 = CARTESIAN_POINT('',(5.625,-3.5,0.));+#537 = VECTOR('',#538,1.);+#538 = DIRECTION('',(-0.196116135138,-0.980580675691,0.));+#539 = PLANE('',#540);+#540 = AXIS2_PLACEMENT_3D('',#541,#542,#543);+#541 = CARTESIAN_POINT('',(5.625,-3.5,0.));+#542 = DIRECTION('',(0.980580675691,-0.196116135138,0.));+#543 = DIRECTION('',(-0.196116135138,-0.980580675691,0.));+#544 = ADVANCED_FACE('',(#545),#570,.T.);+#545 = FACE_BOUND('',#546,.T.);+#546 = EDGE_LOOP('',(#547,#548,#556,#564));+#547 = ORIENTED_EDGE('',*,*,#526,.T.);+#548 = ORIENTED_EDGE('',*,*,#549,.T.);+#549 = EDGE_CURVE('',#519,#550,#552,.T.);+#550 = VERTEX_POINT('',#551);+#551 = CARTESIAN_POINT('',(4.625,-5.,1.27));+#552 = LINE('',#553,#554);+#553 = CARTESIAN_POINT('',(5.325,-5.,1.27));+#554 = VECTOR('',#555,1.);+#555 = DIRECTION('',(-1.,0.,0.));+#556 = ORIENTED_EDGE('',*,*,#557,.F.);+#557 = EDGE_CURVE('',#558,#550,#560,.T.);+#558 = VERTEX_POINT('',#559);+#559 = CARTESIAN_POINT('',(4.625,-5.,0.));+#560 = LINE('',#561,#562);+#561 = CARTESIAN_POINT('',(4.625,-5.,0.));+#562 = VECTOR('',#563,1.);+#563 = DIRECTION('',(0.,0.,1.));+#564 = ORIENTED_EDGE('',*,*,#565,.F.);+#565 = EDGE_CURVE('',#527,#558,#566,.T.);+#566 = LINE('',#567,#568);+#567 = CARTESIAN_POINT('',(5.325,-5.,0.));+#568 = VECTOR('',#569,1.);+#569 = DIRECTION('',(-1.,0.,0.));+#570 = PLANE('',#571);+#571 = AXIS2_PLACEMENT_3D('',#572,#573,#574);+#572 = CARTESIAN_POINT('',(5.325,-5.,0.));+#573 = DIRECTION('',(0.,-1.,0.));+#574 = DIRECTION('',(-1.,0.,0.));+#575 = ADVANCED_FACE('',(#576),#601,.T.);+#576 = FACE_BOUND('',#577,.T.);+#577 = EDGE_LOOP('',(#578,#579,#587,#595));+#578 = ORIENTED_EDGE('',*,*,#557,.T.);+#579 = ORIENTED_EDGE('',*,*,#580,.T.);+#580 = EDGE_CURVE('',#550,#581,#583,.T.);+#581 = VERTEX_POINT('',#582);+#582 = CARTESIAN_POINT('',(4.625,-4.,1.27));+#583 = LINE('',#584,#585);+#584 = CARTESIAN_POINT('',(4.625,-5.,1.27));+#585 = VECTOR('',#586,1.);+#586 = DIRECTION('',(0.,1.,0.));+#587 = ORIENTED_EDGE('',*,*,#588,.F.);+#588 = EDGE_CURVE('',#589,#581,#591,.T.);+#589 = VERTEX_POINT('',#590);+#590 = CARTESIAN_POINT('',(4.625,-4.,0.));+#591 = LINE('',#592,#593);+#592 = CARTESIAN_POINT('',(4.625,-4.,0.));+#593 = VECTOR('',#594,1.);+#594 = DIRECTION('',(0.,0.,1.));+#595 = ORIENTED_EDGE('',*,*,#596,.F.);+#596 = EDGE_CURVE('',#558,#589,#597,.T.);+#597 = LINE('',#598,#599);+#598 = CARTESIAN_POINT('',(4.625,-5.,0.));+#599 = VECTOR('',#600,1.);+#600 = DIRECTION('',(0.,1.,0.));+#601 = PLANE('',#602);+#602 = AXIS2_PLACEMENT_3D('',#603,#604,#605);+#603 = CARTESIAN_POINT('',(4.625,-5.,0.));+#604 = DIRECTION('',(-1.,0.,0.));+#605 = DIRECTION('',(0.,1.,0.));+#606 = ADVANCED_FACE('',(#607),#632,.T.);+#607 = FACE_BOUND('',#608,.T.);+#608 = EDGE_LOOP('',(#609,#610,#618,#626));+#609 = ORIENTED_EDGE('',*,*,#588,.T.);+#610 = ORIENTED_EDGE('',*,*,#611,.T.);+#611 = EDGE_CURVE('',#581,#612,#614,.T.);+#612 = VERTEX_POINT('',#613);+#613 = CARTESIAN_POINT('',(-1.925,-4.,1.27));+#614 = LINE('',#615,#616);+#615 = CARTESIAN_POINT('',(4.625,-4.,1.27));+#616 = VECTOR('',#617,1.);+#617 = DIRECTION('',(-1.,0.,0.));+#618 = ORIENTED_EDGE('',*,*,#619,.F.);+#619 = EDGE_CURVE('',#620,#612,#622,.T.);+#620 = VERTEX_POINT('',#621);+#621 = CARTESIAN_POINT('',(-1.925,-4.,0.));+#622 = LINE('',#623,#624);+#623 = CARTESIAN_POINT('',(-1.925,-4.,0.));+#624 = VECTOR('',#625,1.);+#625 = DIRECTION('',(0.,0.,1.));+#626 = ORIENTED_EDGE('',*,*,#627,.F.);+#627 = EDGE_CURVE('',#589,#620,#628,.T.);+#628 = LINE('',#629,#630);+#629 = CARTESIAN_POINT('',(4.625,-4.,0.));+#630 = VECTOR('',#631,1.);+#631 = DIRECTION('',(-1.,0.,0.));+#632 = PLANE('',#633);+#633 = AXIS2_PLACEMENT_3D('',#634,#635,#636);+#634 = CARTESIAN_POINT('',(4.625,-4.,0.));+#635 = DIRECTION('',(0.,-1.,0.));+#636 = DIRECTION('',(-1.,0.,0.));+#637 = ADVANCED_FACE('',(#638),#663,.T.);+#638 = FACE_BOUND('',#639,.T.);+#639 = EDGE_LOOP('',(#640,#641,#649,#657));+#640 = ORIENTED_EDGE('',*,*,#619,.T.);+#641 = ORIENTED_EDGE('',*,*,#642,.T.);+#642 = EDGE_CURVE('',#612,#643,#645,.T.);+#643 = VERTEX_POINT('',#644);+#644 = CARTESIAN_POINT('',(-1.925,4.,1.27));+#645 = LINE('',#646,#647);+#646 = CARTESIAN_POINT('',(-1.925,-4.,1.27));+#647 = VECTOR('',#648,1.);+#648 = DIRECTION('',(0.,1.,0.));+#649 = ORIENTED_EDGE('',*,*,#650,.F.);+#650 = EDGE_CURVE('',#651,#643,#653,.T.);+#651 = VERTEX_POINT('',#652);+#652 = CARTESIAN_POINT('',(-1.925,4.,0.));+#653 = LINE('',#654,#655);+#654 = CARTESIAN_POINT('',(-1.925,4.,0.));+#655 = VECTOR('',#656,1.);+#656 = DIRECTION('',(0.,0.,1.));+#657 = ORIENTED_EDGE('',*,*,#658,.F.);+#658 = EDGE_CURVE('',#620,#651,#659,.T.);+#659 = LINE('',#660,#661);+#660 = CARTESIAN_POINT('',(-1.925,-4.,0.));+#661 = VECTOR('',#662,1.);+#662 = DIRECTION('',(0.,1.,0.));+#663 = PLANE('',#664);+#664 = AXIS2_PLACEMENT_3D('',#665,#666,#667);+#665 = CARTESIAN_POINT('',(-1.925,-4.,0.));+#666 = DIRECTION('',(-1.,0.,0.));+#667 = DIRECTION('',(0.,1.,0.));+#668 = ADVANCED_FACE('',(#669),#694,.T.);+#669 = FACE_BOUND('',#670,.T.);+#670 = EDGE_LOOP('',(#671,#672,#680,#688));+#671 = ORIENTED_EDGE('',*,*,#650,.T.);+#672 = ORIENTED_EDGE('',*,*,#673,.T.);+#673 = EDGE_CURVE('',#643,#674,#676,.T.);+#674 = VERTEX_POINT('',#675);+#675 = CARTESIAN_POINT('',(4.625,4.,1.27));+#676 = LINE('',#677,#678);+#677 = CARTESIAN_POINT('',(-1.925,4.,1.27));+#678 = VECTOR('',#679,1.);+#679 = DIRECTION('',(1.,0.,0.));+#680 = ORIENTED_EDGE('',*,*,#681,.F.);+#681 = EDGE_CURVE('',#682,#674,#684,.T.);+#682 = VERTEX_POINT('',#683);+#683 = CARTESIAN_POINT('',(4.625,4.,0.));+#684 = LINE('',#685,#686);+#685 = CARTESIAN_POINT('',(4.625,4.,0.));+#686 = VECTOR('',#687,1.);+#687 = DIRECTION('',(0.,0.,1.));+#688 = ORIENTED_EDGE('',*,*,#689,.F.);+#689 = EDGE_CURVE('',#651,#682,#690,.T.);+#690 = LINE('',#691,#692);+#691 = CARTESIAN_POINT('',(-1.925,4.,0.));+#692 = VECTOR('',#693,1.);+#693 = DIRECTION('',(1.,0.,0.));+#694 = PLANE('',#695);+#695 = AXIS2_PLACEMENT_3D('',#696,#697,#698);+#696 = CARTESIAN_POINT('',(-1.925,4.,0.));+#697 = DIRECTION('',(0.,1.,0.));+#698 = DIRECTION('',(1.,0.,0.));+#699 = ADVANCED_FACE('',(#700),#725,.T.);+#700 = FACE_BOUND('',#701,.T.);+#701 = EDGE_LOOP('',(#702,#703,#711,#719));+#702 = ORIENTED_EDGE('',*,*,#681,.T.);+#703 = ORIENTED_EDGE('',*,*,#704,.T.);+#704 = EDGE_CURVE('',#674,#705,#707,.T.);+#705 = VERTEX_POINT('',#706);+#706 = CARTESIAN_POINT('',(4.625,5.,1.27));+#707 = LINE('',#708,#709);+#708 = CARTESIAN_POINT('',(4.625,4.,1.27));+#709 = VECTOR('',#710,1.);+#710 = DIRECTION('',(0.,1.,0.));+#711 = ORIENTED_EDGE('',*,*,#712,.F.);+#712 = EDGE_CURVE('',#713,#705,#715,.T.);+#713 = VERTEX_POINT('',#714);+#714 = CARTESIAN_POINT('',(4.625,5.,0.));+#715 = LINE('',#716,#717);+#716 = CARTESIAN_POINT('',(4.625,5.,0.));+#717 = VECTOR('',#718,1.);+#718 = DIRECTION('',(0.,0.,1.));+#719 = ORIENTED_EDGE('',*,*,#720,.F.);+#720 = EDGE_CURVE('',#682,#713,#721,.T.);+#721 = LINE('',#722,#723);+#722 = CARTESIAN_POINT('',(4.625,4.,0.));+#723 = VECTOR('',#724,1.);+#724 = DIRECTION('',(0.,1.,0.));+#725 = PLANE('',#726);+#726 = AXIS2_PLACEMENT_3D('',#727,#728,#729);+#727 = CARTESIAN_POINT('',(4.625,4.,0.));+#728 = DIRECTION('',(-1.,0.,0.));+#729 = DIRECTION('',(0.,1.,0.));+#730 = ADVANCED_FACE('',(#731),#756,.T.);+#731 = FACE_BOUND('',#732,.T.);+#732 = EDGE_LOOP('',(#733,#734,#742,#750));+#733 = ORIENTED_EDGE('',*,*,#712,.T.);+#734 = ORIENTED_EDGE('',*,*,#735,.T.);+#735 = EDGE_CURVE('',#705,#736,#738,.T.);+#736 = VERTEX_POINT('',#737);+#737 = CARTESIAN_POINT('',(5.325,5.,1.27));+#738 = LINE('',#739,#740);+#739 = CARTESIAN_POINT('',(4.625,5.,1.27));+#740 = VECTOR('',#741,1.);+#741 = DIRECTION('',(1.,0.,0.));+#742 = ORIENTED_EDGE('',*,*,#743,.F.);+#743 = EDGE_CURVE('',#744,#736,#746,.T.);+#744 = VERTEX_POINT('',#745);+#745 = CARTESIAN_POINT('',(5.325,5.,0.));+#746 = LINE('',#747,#748);+#747 = CARTESIAN_POINT('',(5.325,5.,0.));+#748 = VECTOR('',#749,1.);+#749 = DIRECTION('',(0.,0.,1.));+#750 = ORIENTED_EDGE('',*,*,#751,.F.);+#751 = EDGE_CURVE('',#713,#744,#752,.T.);+#752 = LINE('',#753,#754);+#753 = CARTESIAN_POINT('',(4.625,5.,0.));+#754 = VECTOR('',#755,1.);+#755 = DIRECTION('',(1.,0.,0.));+#756 = PLANE('',#757);+#757 = AXIS2_PLACEMENT_3D('',#758,#759,#760);+#758 = CARTESIAN_POINT('',(4.625,5.,0.));+#759 = DIRECTION('',(0.,1.,0.));+#760 = DIRECTION('',(1.,0.,0.));+#761 = ADVANCED_FACE('',(#762),#778,.T.);+#762 = FACE_BOUND('',#763,.T.);+#763 = EDGE_LOOP('',(#764,#765,#771,#772));+#764 = ORIENTED_EDGE('',*,*,#743,.T.);+#765 = ORIENTED_EDGE('',*,*,#766,.T.);+#766 = EDGE_CURVE('',#736,#496,#767,.T.);+#767 = LINE('',#768,#769);+#768 = CARTESIAN_POINT('',(5.325,5.,1.27));+#769 = VECTOR('',#770,1.);+#770 = DIRECTION('',(0.196116135138,-0.980580675691,0.));+#771 = ORIENTED_EDGE('',*,*,#495,.F.);+#772 = ORIENTED_EDGE('',*,*,#773,.F.);+#773 = EDGE_CURVE('',#744,#488,#774,.T.);+#774 = LINE('',#775,#776);+#775 = CARTESIAN_POINT('',(5.325,5.,0.));+#776 = VECTOR('',#777,1.);+#777 = DIRECTION('',(0.196116135138,-0.980580675691,0.));+#778 = PLANE('',#779);+#779 = AXIS2_PLACEMENT_3D('',#780,#781,#782);+#780 = CARTESIAN_POINT('',(5.325,5.,0.));+#781 = DIRECTION('',(0.980580675691,0.196116135138,-0.));+#782 = DIRECTION('',(0.196116135138,-0.980580675691,0.));+#783 = ADVANCED_FACE('',(#784),#796,.T.);+#784 = FACE_BOUND('',#785,.T.);+#785 = EDGE_LOOP('',(#786,#787,#788,#789,#790,#791,#792,#793,#794,#795)+);+#786 = ORIENTED_EDGE('',*,*,#487,.F.);+#787 = ORIENTED_EDGE('',*,*,#534,.T.);+#788 = ORIENTED_EDGE('',*,*,#565,.T.);+#789 = ORIENTED_EDGE('',*,*,#596,.T.);+#790 = ORIENTED_EDGE('',*,*,#627,.T.);+#791 = ORIENTED_EDGE('',*,*,#658,.T.);+#792 = ORIENTED_EDGE('',*,*,#689,.T.);+#793 = ORIENTED_EDGE('',*,*,#720,.T.);+#794 = ORIENTED_EDGE('',*,*,#751,.T.);+#795 = ORIENTED_EDGE('',*,*,#773,.T.);+#796 = PLANE('',#797);+#797 = AXIS2_PLACEMENT_3D('',#798,#799,#800);+#798 = CARTESIAN_POINT('',(2.159333027204,-5.140008905247E-17,0.));+#799 = DIRECTION('',(-0.,-0.,-1.));+#800 = DIRECTION('',(-1.,0.,0.));+#801 = ADVANCED_FACE('',(#802),#814,.F.);+#802 = FACE_BOUND('',#803,.F.);+#803 = EDGE_LOOP('',(#804,#805,#806,#807,#808,#809,#810,#811,#812,#813)+);+#804 = ORIENTED_EDGE('',*,*,#518,.T.);+#805 = ORIENTED_EDGE('',*,*,#549,.T.);+#806 = ORIENTED_EDGE('',*,*,#580,.T.);+#807 = ORIENTED_EDGE('',*,*,#611,.T.);+#808 = ORIENTED_EDGE('',*,*,#642,.T.);+#809 = ORIENTED_EDGE('',*,*,#673,.T.);+#810 = ORIENTED_EDGE('',*,*,#704,.T.);+#811 = ORIENTED_EDGE('',*,*,#735,.T.);+#812 = ORIENTED_EDGE('',*,*,#766,.T.);+#813 = ORIENTED_EDGE('',*,*,#503,.T.);+#814 = PLANE('',#815);+#815 = AXIS2_PLACEMENT_3D('',#816,#817,#818);+#816 = CARTESIAN_POINT('',(2.159333027204,-5.140008905247E-17,1.27));+#817 = DIRECTION('',(-0.,-0.,-1.));+#818 = DIRECTION('',(-1.,0.,0.));+#819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3)+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#823)) GLOBAL_UNIT_ASSIGNED_CONTEXT+((#820,#821,#822)) REPRESENTATION_CONTEXT('Context #1',+'3D Context with UNIT and UNCERTAINTY') );+#820 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#821 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#822 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#823 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#820,+'distance_accuracy_value','confusion accuracy');+#824 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#825,#827);+#825 = ( REPRESENTATION_RELATIONSHIP('','',#470,#447)+REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#826)+SHAPE_REPRESENTATION_RELATIONSHIP() );+#826 = ITEM_DEFINED_TRANSFORMATION('','',#11,#448);+#827 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',#828+);+#828 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('80','','',#442,#465,$);+#829 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#467));+#830 = SHAPE_DEFINITION_REPRESENTATION(#831,#837);+#831 = PRODUCT_DEFINITION_SHAPE('','',#832);+#832 = PRODUCT_DEFINITION('design','',#833,#836);+#833 = PRODUCT_DEFINITION_FORMATION('','',#834);+#834 = PRODUCT('a648ce35-9c39-11ed-93f0-dde97e994e83',+'a648ce35-9c39-11ed-93f0-dde97e994e83','',(#835));+#835 = PRODUCT_CONTEXT('',#2,'mechanical');+#836 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#837 = SHAPE_REPRESENTATION('',(#11,#838),#842);+#838 = AXIS2_PLACEMENT_3D('',#839,#840,#841);+#839 = CARTESIAN_POINT('',(0.,0.,0.));+#840 = DIRECTION('',(0.,0.,1.));+#841 = DIRECTION('',(1.,0.,-0.));+#842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3)+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#846)) GLOBAL_UNIT_ASSIGNED_CONTEXT+((#843,#844,#845)) REPRESENTATION_CONTEXT('Context #1',+'3D Context with UNIT and UNCERTAINTY') );+#843 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#844 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#845 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#846 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#843,+'distance_accuracy_value','confusion accuracy');+#847 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#848,#850);+#848 = ( REPRESENTATION_RELATIONSHIP('','',#837,#32)+REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#849)+SHAPE_REPRESENTATION_RELATIONSHIP() );+#849 = ITEM_DEFINED_TRANSFORMATION('','',#11,#41);+#850 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',#851+);+#851 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('83','','',#27,#832,$);+#852 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#834));+#853 = SHAPE_DEFINITION_REPRESENTATION(#854,#860);+#854 = PRODUCT_DEFINITION_SHAPE('','',#855);+#855 = PRODUCT_DEFINITION('design','',#856,#859);+#856 = PRODUCT_DEFINITION_FORMATION('','',#857);+#857 = PRODUCT('a648ce35-9c39-11ed-93f0-dde97e994e83_part',+'a648ce35-9c39-11ed-93f0-dde97e994e83_part','',(#858));+#858 = PRODUCT_CONTEXT('',#2,'mechanical');+#859 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#860 = SHAPE_REPRESENTATION('',(#11,#861,#1547,#2233,#2515,#3201),#3887+);+#861 = MANIFOLD_SOLID_BREP('',#862);+#862 = CLOSED_SHELL('',(#863,#903,#998,#1022,#1110,#1127,#1144,#1229,+#1246,#1277,#1301,#1326,#1350,#1368,#1393,#1417,#1442,#1459,#1484,+#1501,#1518,#1535));+#863 = ADVANCED_FACE('',(#864),#898,.T.);+#864 = FACE_BOUND('',#865,.T.);+#865 = EDGE_LOOP('',(#866,#876,#884,#892));+#866 = ORIENTED_EDGE('',*,*,#867,.T.);+#867 = EDGE_CURVE('',#868,#870,#872,.T.);+#868 = VERTEX_POINT('',#869);+#869 = CARTESIAN_POINT('',(-5.375,-2.88,2.45));+#870 = VERTEX_POINT('',#871);+#871 = CARTESIAN_POINT('',(-6.375,-2.88,2.45));+#872 = LINE('',#873,#874);+#873 = CARTESIAN_POINT('',(-4.425,-2.88,2.45));+#874 = VECTOR('',#875,1.);+#875 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#876 = ORIENTED_EDGE('',*,*,#877,.T.);+#877 = EDGE_CURVE('',#870,#878,#880,.T.);+#878 = VERTEX_POINT('',#879);+#879 = CARTESIAN_POINT('',(-6.375,-2.88,2.95));+#880 = LINE('',#881,#882);+#881 = CARTESIAN_POINT('',(-6.375,-2.88,0.741609130856));+#882 = VECTOR('',#883,1.);+#883 = DIRECTION('',(0.,4.439358670796E-31,1.));+#884 = ORIENTED_EDGE('',*,*,#885,.T.);+#885 = EDGE_CURVE('',#878,#886,#888,.T.);+#886 = VERTEX_POINT('',#887);+#887 = CARTESIAN_POINT('',(-5.375,-2.88,2.95));+#888 = LINE('',#889,#890);+#889 = CARTESIAN_POINT('',(-6.425,-2.88,2.95));+#890 = VECTOR('',#891,1.);+#891 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#892 = ORIENTED_EDGE('',*,*,#893,.T.);+#893 = EDGE_CURVE('',#886,#868,#894,.T.);+#894 = LINE('',#895,#896);+#895 = CARTESIAN_POINT('',(-5.375,-2.88,0.741609130856));+#896 = VECTOR('',#897,1.);+#897 = DIRECTION('',(0.,-4.439358670796E-31,-1.));+#898 = PLANE('',#899);+#899 = AXIS2_PLACEMENT_3D('',#900,#901,#902);+#900 = CARTESIAN_POINT('',(-6.906718560679,-2.88,1.483218261713));+#901 = DIRECTION('',(5.017907410264E-31,1.,-4.439358670796E-31));+#902 = DIRECTION('',(1.,-5.017907410264E-31,0.));+#903 = ADVANCED_FACE('',(#904),#993,.T.);+#904 = FACE_BOUND('',#905,.T.);+#905 = EDGE_LOOP('',(#906,#907,#915,#923,#931,#939,#947,#955,#963,#971,+#979,#987));+#906 = ORIENTED_EDGE('',*,*,#867,.F.);+#907 = ORIENTED_EDGE('',*,*,#908,.T.);+#908 = EDGE_CURVE('',#868,#909,#911,.T.);+#909 = VERTEX_POINT('',#910);+#910 = CARTESIAN_POINT('',(-5.375,-3.,2.45));+#911 = LINE('',#912,#913);+#912 = CARTESIAN_POINT('',(-5.375,1.06,2.45));+#913 = VECTOR('',#914,1.);+#914 = DIRECTION('',(0.,-1.,0.));+#915 = ORIENTED_EDGE('',*,*,#916,.F.);+#916 = EDGE_CURVE('',#917,#909,#919,.T.);+#917 = VERTEX_POINT('',#918);+#918 = CARTESIAN_POINT('',(-4.425,-3.,2.45));+#919 = LINE('',#920,#921);+#920 = CARTESIAN_POINT('',(-4.425,-3.,2.45));+#921 = VECTOR('',#922,1.);+#922 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#923 = ORIENTED_EDGE('',*,*,#924,.T.);+#924 = EDGE_CURVE('',#917,#925,#927,.T.);+#925 = VERTEX_POINT('',#926);+#926 = CARTESIAN_POINT('',(-4.425,-3.8,2.45));+#927 = LINE('',#928,#929);+#928 = CARTESIAN_POINT('',(-4.425,-3.,2.45));+#929 = VECTOR('',#930,1.);+#930 = DIRECTION('',(0.,-1.,0.));+#931 = ORIENTED_EDGE('',*,*,#932,.T.);+#932 = EDGE_CURVE('',#925,#933,#935,.T.);+#933 = VERTEX_POINT('',#934);+#934 = CARTESIAN_POINT('',(-5.375,-3.8,2.45));+#935 = LINE('',#936,#937);+#936 = CARTESIAN_POINT('',(-4.425,-3.8,2.45));+#937 = VECTOR('',#938,1.);+#938 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#939 = ORIENTED_EDGE('',*,*,#940,.T.);+#940 = EDGE_CURVE('',#933,#941,#943,.T.);+#941 = VERTEX_POINT('',#942);+#942 = CARTESIAN_POINT('',(-5.375,-3.92,2.45));+#943 = LINE('',#944,#945);+#944 = CARTESIAN_POINT('',(-5.375,1.06,2.45));+#945 = VECTOR('',#946,1.);+#946 = DIRECTION('',(0.,-1.,0.));+#947 = ORIENTED_EDGE('',*,*,#948,.T.);+#948 = EDGE_CURVE('',#941,#949,#951,.T.);+#949 = VERTEX_POINT('',#950);+#950 = CARTESIAN_POINT('',(-6.375,-3.92,2.45));+#951 = LINE('',#952,#953);+#952 = CARTESIAN_POINT('',(-4.425,-3.92,2.45));+#953 = VECTOR('',#954,1.);+#954 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#955 = ORIENTED_EDGE('',*,*,#956,.T.);+#956 = EDGE_CURVE('',#949,#957,#959,.T.);+#957 = VERTEX_POINT('',#958);+#958 = CARTESIAN_POINT('',(-6.375,-3.8,2.45));+#959 = LINE('',#960,#961);+#960 = CARTESIAN_POINT('',(-6.375,-3.94,2.45));+#961 = VECTOR('',#962,1.);+#962 = DIRECTION('',(0.,1.,-0.));+#963 = ORIENTED_EDGE('',*,*,#964,.T.);+#964 = EDGE_CURVE('',#957,#965,#967,.T.);+#965 = VERTEX_POINT('',#966);+#966 = CARTESIAN_POINT('',(-6.425,-3.8,2.45));+#967 = LINE('',#968,#969);+#968 = CARTESIAN_POINT('',(-4.425,-3.8,2.45));+#969 = VECTOR('',#970,1.);+#970 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#971 = ORIENTED_EDGE('',*,*,#972,.F.);+#972 = EDGE_CURVE('',#973,#965,#975,.T.);+#973 = VERTEX_POINT('',#974);+#974 = CARTESIAN_POINT('',(-6.425,-3.,2.45));+#975 = LINE('',#976,#977);+#976 = CARTESIAN_POINT('',(-6.425,-3.,2.45));+#977 = VECTOR('',#978,1.);+#978 = DIRECTION('',(0.,-1.,0.));+#979 = ORIENTED_EDGE('',*,*,#980,.F.);+#980 = EDGE_CURVE('',#981,#973,#983,.T.);+#981 = VERTEX_POINT('',#982);+#982 = CARTESIAN_POINT('',(-6.375,-3.,2.45));+#983 = LINE('',#984,#985);+#984 = CARTESIAN_POINT('',(-4.425,-3.,2.45));+#985 = VECTOR('',#986,1.);+#986 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#987 = ORIENTED_EDGE('',*,*,#988,.T.);+#988 = EDGE_CURVE('',#981,#870,#989,.T.);+#989 = LINE('',#990,#991);+#990 = CARTESIAN_POINT('',(-6.375,-3.94,2.45));+#991 = VECTOR('',#992,1.);+#992 = DIRECTION('',(0.,1.,-0.));+#993 = PLANE('',#994);+#994 = AXIS2_PLACEMENT_3D('',#995,#996,#997);+#995 = CARTESIAN_POINT('',(-4.425,-2.88,2.45));+#996 = DIRECTION('',(-2.22044604925E-16,-0.,-1.));+#997 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#998 = ADVANCED_FACE('',(#999),#1017,.T.);+#999 = FACE_BOUND('',#1000,.T.);+#1000 = EDGE_LOOP('',(#1001,#1002,#1010,#1016));+#1001 = ORIENTED_EDGE('',*,*,#893,.F.);+#1002 = ORIENTED_EDGE('',*,*,#1003,.F.);+#1003 = EDGE_CURVE('',#1004,#886,#1006,.T.);+#1004 = VERTEX_POINT('',#1005);+#1005 = CARTESIAN_POINT('',(-5.375,-3.,2.95));+#1006 = LINE('',#1007,#1008);+#1007 = CARTESIAN_POINT('',(-5.375,1.06,2.95));+#1008 = VECTOR('',#1009,1.);+#1009 = DIRECTION('',(-0.,1.,0.));+#1010 = ORIENTED_EDGE('',*,*,#1011,.T.);+#1011 = EDGE_CURVE('',#1004,#909,#1012,.T.);+#1012 = LINE('',#1013,#1014);+#1013 = CARTESIAN_POINT('',(-5.375,-3.,0.741609130856));+#1014 = VECTOR('',#1015,1.);+#1015 = DIRECTION('',(-0.,0.,-1.));+#1016 = ORIENTED_EDGE('',*,*,#908,.F.);+#1017 = PLANE('',#1018);+#1018 = AXIS2_PLACEMENT_3D('',#1019,#1020,#1021);+#1019 = CARTESIAN_POINT('',(-5.375,5.,0.));+#1020 = DIRECTION('',(1.,0.,-0.));+#1021 = DIRECTION('',(0.,-1.,0.));+#1022 = ADVANCED_FACE('',(#1023),#1105,.T.);+#1023 = FACE_BOUND('',#1024,.T.);+#1024 = EDGE_LOOP('',(#1025,#1026,#1034,#1042,#1050,#1058,#1066,#1074,+#1082,#1090,#1098,#1104));+#1025 = ORIENTED_EDGE('',*,*,#885,.F.);+#1026 = ORIENTED_EDGE('',*,*,#1027,.T.);+#1027 = EDGE_CURVE('',#878,#1028,#1030,.T.);+#1028 = VERTEX_POINT('',#1029);+#1029 = CARTESIAN_POINT('',(-6.375,-3.,2.95));+#1030 = LINE('',#1031,#1032);+#1031 = CARTESIAN_POINT('',(-6.375,-3.94,2.95));+#1032 = VECTOR('',#1033,1.);+#1033 = DIRECTION('',(0.,-1.,0.));+#1034 = ORIENTED_EDGE('',*,*,#1035,.F.);+#1035 = EDGE_CURVE('',#1036,#1028,#1038,.T.);+#1036 = VERTEX_POINT('',#1037);+#1037 = CARTESIAN_POINT('',(-6.425,-3.,2.95));+#1038 = LINE('',#1039,#1040);+#1039 = CARTESIAN_POINT('',(-6.425,-3.,2.95));+#1040 = VECTOR('',#1041,1.);+#1041 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#1042 = ORIENTED_EDGE('',*,*,#1043,.T.);+#1043 = EDGE_CURVE('',#1036,#1044,#1046,.T.);+#1044 = VERTEX_POINT('',#1045);+#1045 = CARTESIAN_POINT('',(-6.425,-3.8,2.95));+#1046 = LINE('',#1047,#1048);+#1047 = CARTESIAN_POINT('',(-6.425,-3.,2.95));+#1048 = VECTOR('',#1049,1.);+#1049 = DIRECTION('',(0.,-1.,0.));+#1050 = ORIENTED_EDGE('',*,*,#1051,.T.);+#1051 = EDGE_CURVE('',#1044,#1052,#1054,.T.);+#1052 = VERTEX_POINT('',#1053);+#1053 = CARTESIAN_POINT('',(-6.375,-3.8,2.95));+#1054 = LINE('',#1055,#1056);+#1055 = CARTESIAN_POINT('',(-6.425,-3.8,2.95));+#1056 = VECTOR('',#1057,1.);+#1057 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#1058 = ORIENTED_EDGE('',*,*,#1059,.T.);+#1059 = EDGE_CURVE('',#1052,#1060,#1062,.T.);+#1060 = VERTEX_POINT('',#1061);+#1061 = CARTESIAN_POINT('',(-6.375,-3.92,2.95));+#1062 = LINE('',#1063,#1064);+#1063 = CARTESIAN_POINT('',(-6.375,-3.94,2.95));+#1064 = VECTOR('',#1065,1.);+#1065 = DIRECTION('',(0.,-1.,0.));+#1066 = ORIENTED_EDGE('',*,*,#1067,.T.);+#1067 = EDGE_CURVE('',#1060,#1068,#1070,.T.);+#1068 = VERTEX_POINT('',#1069);+#1069 = CARTESIAN_POINT('',(-5.375,-3.92,2.95));+#1070 = LINE('',#1071,#1072);+#1071 = CARTESIAN_POINT('',(-6.425,-3.92,2.95));+#1072 = VECTOR('',#1073,1.);+#1073 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#1074 = ORIENTED_EDGE('',*,*,#1075,.T.);+#1075 = EDGE_CURVE('',#1068,#1076,#1078,.T.);+#1076 = VERTEX_POINT('',#1077);+#1077 = CARTESIAN_POINT('',(-5.375,-3.8,2.95));+#1078 = LINE('',#1079,#1080);+#1079 = CARTESIAN_POINT('',(-5.375,1.06,2.95));+#1080 = VECTOR('',#1081,1.);+#1081 = DIRECTION('',(-0.,1.,0.));+#1082 = ORIENTED_EDGE('',*,*,#1083,.T.);+#1083 = EDGE_CURVE('',#1076,#1084,#1086,.T.);+#1084 = VERTEX_POINT('',#1085);+#1085 = CARTESIAN_POINT('',(-4.425,-3.8,2.95));+#1086 = LINE('',#1087,#1088);+#1087 = CARTESIAN_POINT('',(-6.425,-3.8,2.95));+#1088 = VECTOR('',#1089,1.);+#1089 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#1090 = ORIENTED_EDGE('',*,*,#1091,.F.);+#1091 = EDGE_CURVE('',#1092,#1084,#1094,.T.);+#1092 = VERTEX_POINT('',#1093);+#1093 = CARTESIAN_POINT('',(-4.425,-3.,2.95));+#1094 = LINE('',#1095,#1096);+#1095 = CARTESIAN_POINT('',(-4.425,-3.,2.95));+#1096 = VECTOR('',#1097,1.);+#1097 = DIRECTION('',(0.,-1.,0.));+#1098 = ORIENTED_EDGE('',*,*,#1099,.F.);+#1099 = EDGE_CURVE('',#1004,#1092,#1100,.T.);+#1100 = LINE('',#1101,#1102);+#1101 = CARTESIAN_POINT('',(-6.425,-3.,2.95));+#1102 = VECTOR('',#1103,1.);+#1103 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#1104 = ORIENTED_EDGE('',*,*,#1003,.T.);+#1105 = PLANE('',#1106);+#1106 = AXIS2_PLACEMENT_3D('',#1107,#1108,#1109);+#1107 = CARTESIAN_POINT('',(-6.425,-2.88,2.95));+#1108 = DIRECTION('',(2.22044604925E-16,0.,1.));+#1109 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#1110 = ADVANCED_FACE('',(#1111),#1122,.T.);+#1111 = FACE_BOUND('',#1112,.T.);+#1112 = EDGE_LOOP('',(#1113,#1114,#1115,#1116));+#1113 = ORIENTED_EDGE('',*,*,#1027,.F.);+#1114 = ORIENTED_EDGE('',*,*,#877,.F.);+#1115 = ORIENTED_EDGE('',*,*,#988,.F.);+#1116 = ORIENTED_EDGE('',*,*,#1117,.T.);+#1117 = EDGE_CURVE('',#981,#1028,#1118,.T.);+#1118 = LINE('',#1119,#1120);+#1119 = CARTESIAN_POINT('',(-6.375,-3.,0.741609130856));+#1120 = VECTOR('',#1121,1.);+#1121 = DIRECTION('',(0.,-0.,1.));+#1122 = PLANE('',#1123);+#1123 = AXIS2_PLACEMENT_3D('',#1124,#1125,#1126);+#1124 = CARTESIAN_POINT('',(-6.375,-5.,0.));+#1125 = DIRECTION('',(-1.,0.,0.));+#1126 = DIRECTION('',(0.,1.,0.));+#1127 = ADVANCED_FACE('',(#1128),#1139,.T.);+#1128 = FACE_BOUND('',#1129,.T.);+#1129 = EDGE_LOOP('',(#1130,#1131,#1132,#1138));+#1130 = ORIENTED_EDGE('',*,*,#1011,.F.);+#1131 = ORIENTED_EDGE('',*,*,#1099,.T.);+#1132 = ORIENTED_EDGE('',*,*,#1133,.T.);+#1133 = EDGE_CURVE('',#1092,#917,#1134,.T.);+#1134 = LINE('',#1135,#1136);+#1135 = CARTESIAN_POINT('',(-4.425,-3.,2.95));+#1136 = VECTOR('',#1137,1.);+#1137 = DIRECTION('',(0.,0.,-1.));+#1138 = ORIENTED_EDGE('',*,*,#916,.T.);+#1139 = PLANE('',#1140);+#1140 = AXIS2_PLACEMENT_3D('',#1141,#1142,#1143);+#1141 = CARTESIAN_POINT('',(-6.906718560679,-3.,1.483218261713));+#1142 = DIRECTION('',(0.,1.,0.));+#1143 = DIRECTION('',(0.,-0.,1.));+#1144 = ADVANCED_FACE('',(#1145),#1224,.T.);+#1145 = FACE_BOUND('',#1146,.T.);+#1146 = EDGE_LOOP('',(#1147,#1157,#1165,#1174,#1182,#1189,#1190,#1191,+#1192,#1201,#1209,#1218));+#1147 = ORIENTED_EDGE('',*,*,#1148,.T.);+#1148 = EDGE_CURVE('',#1149,#1151,#1153,.T.);+#1149 = VERTEX_POINT('',#1150);+#1150 = CARTESIAN_POINT('',(-9.375,-3.,1.015962243071E-15));+#1151 = VERTEX_POINT('',#1152);+#1152 = CARTESIAN_POINT('',(-9.375,-3.,0.5));+#1153 = LINE('',#1154,#1155);+#1154 = CARTESIAN_POINT('',(-9.375,-3.,1.015962243071E-15));+#1155 = VECTOR('',#1156,1.);+#1156 = DIRECTION('',(0.,0.,1.));+#1157 = ORIENTED_EDGE('',*,*,#1158,.T.);+#1158 = EDGE_CURVE('',#1151,#1159,#1161,.T.);+#1159 = VERTEX_POINT('',#1160);+#1160 = CARTESIAN_POINT('',(-7.425,-3.,0.5));+#1161 = LINE('',#1162,#1163);+#1162 = CARTESIAN_POINT('',(-9.375,-3.,0.5));+#1163 = VECTOR('',#1164,1.);+#1164 = DIRECTION('',(1.,0.,0.));+#1165 = ORIENTED_EDGE('',*,*,#1166,.T.);+#1166 = EDGE_CURVE('',#1159,#1167,#1169,.T.);+#1167 = VERTEX_POINT('',#1168);+#1168 = CARTESIAN_POINT('',(-7.175,-3.,0.75));+#1169 = CIRCLE('',#1170,0.25);+#1170 = AXIS2_PLACEMENT_3D('',#1171,#1172,#1173);+#1171 = CARTESIAN_POINT('',(-7.425,-3.,0.75));+#1172 = DIRECTION('',(0.,-1.,0.));+#1173 = DIRECTION('',(3.5527136788E-15,0.,-1.));+#1174 = ORIENTED_EDGE('',*,*,#1175,.T.);+#1175 = EDGE_CURVE('',#1167,#1176,#1178,.T.);+#1176 = VERTEX_POINT('',#1177);+#1177 = CARTESIAN_POINT('',(-7.175,-3.,2.2));+#1178 = LINE('',#1179,#1180);+#1179 = CARTESIAN_POINT('',(-7.175,-3.,0.75));+#1180 = VECTOR('',#1181,1.);+#1181 = DIRECTION('',(0.,0.,1.));+#1182 = ORIENTED_EDGE('',*,*,#1183,.T.);+#1183 = EDGE_CURVE('',#1176,#1036,#1184,.T.);+#1184 = CIRCLE('',#1185,0.75);+#1185 = AXIS2_PLACEMENT_3D('',#1186,#1187,#1188);+#1186 = CARTESIAN_POINT('',(-6.425,-3.,2.2));+#1187 = DIRECTION('',(0.,1.,0.));+#1188 = DIRECTION('',(-1.,0.,5.921189464667E-16));+#1189 = ORIENTED_EDGE('',*,*,#1035,.T.);+#1190 = ORIENTED_EDGE('',*,*,#1117,.F.);+#1191 = ORIENTED_EDGE('',*,*,#980,.T.);+#1192 = ORIENTED_EDGE('',*,*,#1193,.T.);+#1193 = EDGE_CURVE('',#973,#1194,#1196,.T.);+#1194 = VERTEX_POINT('',#1195);+#1195 = CARTESIAN_POINT('',(-6.675,-3.,2.2));+#1196 = CIRCLE('',#1197,0.25);+#1197 = AXIS2_PLACEMENT_3D('',#1198,#1199,#1200);+#1198 = CARTESIAN_POINT('',(-6.425,-3.,2.2));+#1199 = DIRECTION('',(0.,-1.,0.));+#1200 = DIRECTION('',(-3.5527136788E-15,0.,1.));+#1201 = ORIENTED_EDGE('',*,*,#1202,.T.);+#1202 = EDGE_CURVE('',#1194,#1203,#1205,.T.);+#1203 = VERTEX_POINT('',#1204);+#1204 = CARTESIAN_POINT('',(-6.675,-3.,0.75));+#1205 = LINE('',#1206,#1207);+#1206 = CARTESIAN_POINT('',(-6.675,-3.,2.2));+#1207 = VECTOR('',#1208,1.);+#1208 = DIRECTION('',(0.,0.,-1.));+#1209 = ORIENTED_EDGE('',*,*,#1210,.T.);+#1210 = EDGE_CURVE('',#1203,#1211,#1213,.T.);+#1211 = VERTEX_POINT('',#1212);+#1212 = CARTESIAN_POINT('',(-7.425,-3.,5.551115123126E-16));+#1213 = CIRCLE('',#1214,0.75);+#1214 = AXIS2_PLACEMENT_3D('',#1215,#1216,#1217);+#1215 = CARTESIAN_POINT('',(-7.425,-3.,0.75));+#1216 = DIRECTION('',(0.,1.,0.));+#1217 = DIRECTION('',(1.,0.,-8.881784197001E-16));+#1218 = ORIENTED_EDGE('',*,*,#1219,.T.);+#1219 = EDGE_CURVE('',#1211,#1149,#1220,.T.);+#1220 = LINE('',#1221,#1222);+#1221 = CARTESIAN_POINT('',(-7.425,-3.,5.551115123126E-16));+#1222 = VECTOR('',#1223,1.);+#1223 = DIRECTION('',(-1.,0.,2.363337080814E-16));+#1224 = PLANE('',#1225);+#1225 = AXIS2_PLACEMENT_3D('',#1226,#1227,#1228);+#1226 = CARTESIAN_POINT('',(-6.906718560679,-3.,1.483218261713));+#1227 = DIRECTION('',(0.,1.,0.));+#1228 = DIRECTION('',(0.,-0.,1.));+#1229 = ADVANCED_FACE('',(#1230),#1241,.T.);+#1230 = FACE_BOUND('',#1231,.T.);+#1231 = EDGE_LOOP('',(#1232,#1233,#1239,#1240));+#1232 = ORIENTED_EDGE('',*,*,#1091,.T.);+#1233 = ORIENTED_EDGE('',*,*,#1234,.T.);+#1234 = EDGE_CURVE('',#1084,#925,#1235,.T.);+#1235 = LINE('',#1236,#1237);+#1236 = CARTESIAN_POINT('',(-4.425,-3.8,2.95));+#1237 = VECTOR('',#1238,1.);+#1238 = DIRECTION('',(0.,0.,-1.));+#1239 = ORIENTED_EDGE('',*,*,#924,.F.);+#1240 = ORIENTED_EDGE('',*,*,#1133,.F.);+#1241 = PLANE('',#1242);+#1242 = AXIS2_PLACEMENT_3D('',#1243,#1244,#1245);+#1243 = CARTESIAN_POINT('',(-4.425,-3.,2.95));+#1244 = DIRECTION('',(1.,0.,0.));+#1245 = DIRECTION('',(0.,0.,-1.));+#1246 = ADVANCED_FACE('',(#1247),#1272,.T.);+#1247 = FACE_BOUND('',#1248,.T.);+#1248 = EDGE_LOOP('',(#1249,#1257,#1265,#1271));+#1249 = ORIENTED_EDGE('',*,*,#1250,.T.);+#1250 = EDGE_CURVE('',#1149,#1251,#1253,.T.);+#1251 = VERTEX_POINT('',#1252);+#1252 = CARTESIAN_POINT('',(-9.375,-3.8,1.015962243071E-15));+#1253 = LINE('',#1254,#1255);+#1254 = CARTESIAN_POINT('',(-9.375,-3.,1.015962243071E-15));+#1255 = VECTOR('',#1256,1.);+#1256 = DIRECTION('',(0.,-1.,0.));+#1257 = ORIENTED_EDGE('',*,*,#1258,.T.);+#1258 = EDGE_CURVE('',#1251,#1259,#1261,.T.);+#1259 = VERTEX_POINT('',#1260);+#1260 = CARTESIAN_POINT('',(-9.375,-3.8,0.5));+#1261 = LINE('',#1262,#1263);+#1262 = CARTESIAN_POINT('',(-9.375,-3.8,1.015962243071E-15));+#1263 = VECTOR('',#1264,1.);+#1264 = DIRECTION('',(0.,0.,1.));+#1265 = ORIENTED_EDGE('',*,*,#1266,.F.);+#1266 = EDGE_CURVE('',#1151,#1259,#1267,.T.);+#1267 = LINE('',#1268,#1269);+#1268 = CARTESIAN_POINT('',(-9.375,-3.,0.5));+#1269 = VECTOR('',#1270,1.);+#1270 = DIRECTION('',(0.,-1.,0.));+#1271 = ORIENTED_EDGE('',*,*,#1148,.F.);+#1272 = PLANE('',#1273);+#1273 = AXIS2_PLACEMENT_3D('',#1274,#1275,#1276);+#1274 = CARTESIAN_POINT('',(-9.375,-3.,1.015962243071E-15));+#1275 = DIRECTION('',(-1.,0.,0.));+#1276 = DIRECTION('',(0.,0.,1.));+#1277 = ADVANCED_FACE('',(#1278),#1296,.T.);+#1278 = FACE_BOUND('',#1279,.T.);+#1279 = EDGE_LOOP('',(#1280,#1288,#1294,#1295));+#1280 = ORIENTED_EDGE('',*,*,#1281,.T.);+#1281 = EDGE_CURVE('',#1211,#1282,#1284,.T.);+#1282 = VERTEX_POINT('',#1283);+#1283 = CARTESIAN_POINT('',(-7.425,-3.8,5.551115123126E-16));+#1284 = LINE('',#1285,#1286);+#1285 = CARTESIAN_POINT('',(-7.425,-3.,5.551115123126E-16));+#1286 = VECTOR('',#1287,1.);+#1287 = DIRECTION('',(0.,-1.,0.));+#1288 = ORIENTED_EDGE('',*,*,#1289,.T.);+#1289 = EDGE_CURVE('',#1282,#1251,#1290,.T.);+#1290 = LINE('',#1291,#1292);+#1291 = CARTESIAN_POINT('',(-7.425,-3.8,5.551115123126E-16));+#1292 = VECTOR('',#1293,1.);+#1293 = DIRECTION('',(-1.,0.,2.363337080814E-16));+#1294 = ORIENTED_EDGE('',*,*,#1250,.F.);+#1295 = ORIENTED_EDGE('',*,*,#1219,.F.);+#1296 = PLANE('',#1297);+#1297 = AXIS2_PLACEMENT_3D('',#1298,#1299,#1300);+#1298 = CARTESIAN_POINT('',(-7.425,-3.,5.551115123126E-16));+#1299 = DIRECTION('',(-2.363337080814E-16,-0.,-1.));+#1300 = DIRECTION('',(-1.,0.,2.363337080814E-16));+#1301 = ADVANCED_FACE('',(#1302),#1321,.T.);+#1302 = FACE_BOUND('',#1303,.T.);+#1303 = EDGE_LOOP('',(#1304,#1312,#1319,#1320));+#1304 = ORIENTED_EDGE('',*,*,#1305,.T.);+#1305 = EDGE_CURVE('',#1203,#1306,#1308,.T.);+#1306 = VERTEX_POINT('',#1307);+#1307 = CARTESIAN_POINT('',(-6.675,-3.8,0.75));+#1308 = LINE('',#1309,#1310);+#1309 = CARTESIAN_POINT('',(-6.675,-3.,0.75));+#1310 = VECTOR('',#1311,1.);+#1311 = DIRECTION('',(0.,-1.,0.));+#1312 = ORIENTED_EDGE('',*,*,#1313,.T.);+#1313 = EDGE_CURVE('',#1306,#1282,#1314,.T.);+#1314 = CIRCLE('',#1315,0.75);+#1315 = AXIS2_PLACEMENT_3D('',#1316,#1317,#1318);+#1316 = CARTESIAN_POINT('',(-7.425,-3.8,0.75));+#1317 = DIRECTION('',(0.,1.,0.));+#1318 = DIRECTION('',(1.,0.,-8.881784197001E-16));+#1319 = ORIENTED_EDGE('',*,*,#1281,.F.);+#1320 = ORIENTED_EDGE('',*,*,#1210,.F.);+#1321 = CYLINDRICAL_SURFACE('',#1322,0.75);+#1322 = AXIS2_PLACEMENT_3D('',#1323,#1324,#1325);+#1323 = CARTESIAN_POINT('',(-7.425,-3.,0.75));+#1324 = DIRECTION('',(0.,1.,0.));+#1325 = DIRECTION('',(1.,0.,-8.881784197001E-16));+#1326 = ADVANCED_FACE('',(#1327),#1345,.T.);+#1327 = FACE_BOUND('',#1328,.T.);+#1328 = EDGE_LOOP('',(#1329,#1337,#1343,#1344));+#1329 = ORIENTED_EDGE('',*,*,#1330,.T.);+#1330 = EDGE_CURVE('',#1194,#1331,#1333,.T.);+#1331 = VERTEX_POINT('',#1332);+#1332 = CARTESIAN_POINT('',(-6.675,-3.8,2.2));+#1333 = LINE('',#1334,#1335);+#1334 = CARTESIAN_POINT('',(-6.675,-3.,2.2));+#1335 = VECTOR('',#1336,1.);+#1336 = DIRECTION('',(0.,-1.,0.));+#1337 = ORIENTED_EDGE('',*,*,#1338,.T.);+#1338 = EDGE_CURVE('',#1331,#1306,#1339,.T.);+#1339 = LINE('',#1340,#1341);+#1340 = CARTESIAN_POINT('',(-6.675,-3.8,2.2));+#1341 = VECTOR('',#1342,1.);+#1342 = DIRECTION('',(0.,0.,-1.));+#1343 = ORIENTED_EDGE('',*,*,#1305,.F.);+#1344 = ORIENTED_EDGE('',*,*,#1202,.F.);+#1345 = PLANE('',#1346);+#1346 = AXIS2_PLACEMENT_3D('',#1347,#1348,#1349);+#1347 = CARTESIAN_POINT('',(-6.675,-3.,2.2));+#1348 = DIRECTION('',(1.,0.,0.));+#1349 = DIRECTION('',(0.,0.,-1.));+#1350 = ADVANCED_FACE('',(#1351),#1363,.F.);+#1351 = FACE_BOUND('',#1352,.T.);+#1352 = EDGE_LOOP('',(#1353,#1354,#1361,#1362));+#1353 = ORIENTED_EDGE('',*,*,#972,.T.);+#1354 = ORIENTED_EDGE('',*,*,#1355,.T.);+#1355 = EDGE_CURVE('',#965,#1331,#1356,.T.);+#1356 = CIRCLE('',#1357,0.25);+#1357 = AXIS2_PLACEMENT_3D('',#1358,#1359,#1360);+#1358 = CARTESIAN_POINT('',(-6.425,-3.8,2.2));+#1359 = DIRECTION('',(0.,-1.,0.));+#1360 = DIRECTION('',(-3.5527136788E-15,0.,1.));+#1361 = ORIENTED_EDGE('',*,*,#1330,.F.);+#1362 = ORIENTED_EDGE('',*,*,#1193,.F.);+#1363 = CYLINDRICAL_SURFACE('',#1364,0.25);+#1364 = AXIS2_PLACEMENT_3D('',#1365,#1366,#1367);+#1365 = CARTESIAN_POINT('',(-6.425,-3.,2.2));+#1366 = DIRECTION('',(-0.,1.,-0.));+#1367 = DIRECTION('',(-3.5527136788E-15,0.,1.));+#1368 = ADVANCED_FACE('',(#1369),#1388,.T.);+#1369 = FACE_BOUND('',#1370,.T.);+#1370 = EDGE_LOOP('',(#1371,#1379,#1386,#1387));+#1371 = ORIENTED_EDGE('',*,*,#1372,.T.);+#1372 = EDGE_CURVE('',#1176,#1373,#1375,.T.);+#1373 = VERTEX_POINT('',#1374);+#1374 = CARTESIAN_POINT('',(-7.175,-3.8,2.2));+#1375 = LINE('',#1376,#1377);+#1376 = CARTESIAN_POINT('',(-7.175,-3.,2.2));+#1377 = VECTOR('',#1378,1.);+#1378 = DIRECTION('',(0.,-1.,0.));+#1379 = ORIENTED_EDGE('',*,*,#1380,.T.);+#1380 = EDGE_CURVE('',#1373,#1044,#1381,.T.);+#1381 = CIRCLE('',#1382,0.75);+#1382 = AXIS2_PLACEMENT_3D('',#1383,#1384,#1385);+#1383 = CARTESIAN_POINT('',(-6.425,-3.8,2.2));+#1384 = DIRECTION('',(0.,1.,0.));+#1385 = DIRECTION('',(-1.,0.,5.921189464667E-16));+#1386 = ORIENTED_EDGE('',*,*,#1043,.F.);+#1387 = ORIENTED_EDGE('',*,*,#1183,.F.);+#1388 = CYLINDRICAL_SURFACE('',#1389,0.75);+#1389 = AXIS2_PLACEMENT_3D('',#1390,#1391,#1392);+#1390 = CARTESIAN_POINT('',(-6.425,-3.,2.2));+#1391 = DIRECTION('',(0.,1.,0.));+#1392 = DIRECTION('',(-1.,0.,5.921189464667E-16));+#1393 = ADVANCED_FACE('',(#1394),#1412,.T.);+#1394 = FACE_BOUND('',#1395,.T.);+#1395 = EDGE_LOOP('',(#1396,#1404,#1410,#1411));+#1396 = ORIENTED_EDGE('',*,*,#1397,.T.);+#1397 = EDGE_CURVE('',#1167,#1398,#1400,.T.);+#1398 = VERTEX_POINT('',#1399);+#1399 = CARTESIAN_POINT('',(-7.175,-3.8,0.75));+#1400 = LINE('',#1401,#1402);+#1401 = CARTESIAN_POINT('',(-7.175,-3.,0.75));+#1402 = VECTOR('',#1403,1.);+#1403 = DIRECTION('',(0.,-1.,0.));+#1404 = ORIENTED_EDGE('',*,*,#1405,.T.);+#1405 = EDGE_CURVE('',#1398,#1373,#1406,.T.);+#1406 = LINE('',#1407,#1408);+#1407 = CARTESIAN_POINT('',(-7.175,-3.8,0.75));+#1408 = VECTOR('',#1409,1.);+#1409 = DIRECTION('',(0.,0.,1.));+#1410 = ORIENTED_EDGE('',*,*,#1372,.F.);+#1411 = ORIENTED_EDGE('',*,*,#1175,.F.);+#1412 = PLANE('',#1413);+#1413 = AXIS2_PLACEMENT_3D('',#1414,#1415,#1416);+#1414 = CARTESIAN_POINT('',(-7.175,-3.,0.75));+#1415 = DIRECTION('',(-1.,0.,0.));+#1416 = DIRECTION('',(0.,0.,1.));+#1417 = ADVANCED_FACE('',(#1418),#1437,.F.);+#1418 = FACE_BOUND('',#1419,.T.);+#1419 = EDGE_LOOP('',(#1420,#1428,#1435,#1436));+#1420 = ORIENTED_EDGE('',*,*,#1421,.T.);+#1421 = EDGE_CURVE('',#1159,#1422,#1424,.T.);+#1422 = VERTEX_POINT('',#1423);+#1423 = CARTESIAN_POINT('',(-7.425,-3.8,0.5));+#1424 = LINE('',#1425,#1426);+#1425 = CARTESIAN_POINT('',(-7.425,-3.,0.5));+#1426 = VECTOR('',#1427,1.);+#1427 = DIRECTION('',(0.,-1.,0.));+#1428 = ORIENTED_EDGE('',*,*,#1429,.T.);+#1429 = EDGE_CURVE('',#1422,#1398,#1430,.T.);+#1430 = CIRCLE('',#1431,0.25);+#1431 = AXIS2_PLACEMENT_3D('',#1432,#1433,#1434);+#1432 = CARTESIAN_POINT('',(-7.425,-3.8,0.75));+#1433 = DIRECTION('',(0.,-1.,0.));+#1434 = DIRECTION('',(3.5527136788E-15,0.,-1.));+#1435 = ORIENTED_EDGE('',*,*,#1397,.F.);+#1436 = ORIENTED_EDGE('',*,*,#1166,.F.);+#1437 = CYLINDRICAL_SURFACE('',#1438,0.25);+#1438 = AXIS2_PLACEMENT_3D('',#1439,#1440,#1441);+#1439 = CARTESIAN_POINT('',(-7.425,-3.,0.75));+#1440 = DIRECTION('',(-0.,1.,-0.));+#1441 = DIRECTION('',(3.5527136788E-15,0.,-1.));+#1442 = ADVANCED_FACE('',(#1443),#1454,.T.);+#1443 = FACE_BOUND('',#1444,.T.);+#1444 = EDGE_LOOP('',(#1445,#1446,#1452,#1453));+#1445 = ORIENTED_EDGE('',*,*,#1266,.T.);+#1446 = ORIENTED_EDGE('',*,*,#1447,.T.);+#1447 = EDGE_CURVE('',#1259,#1422,#1448,.T.);+#1448 = LINE('',#1449,#1450);+#1449 = CARTESIAN_POINT('',(-9.375,-3.8,0.5));+#1450 = VECTOR('',#1451,1.);+#1451 = DIRECTION('',(1.,0.,0.));+#1452 = ORIENTED_EDGE('',*,*,#1421,.F.);+#1453 = ORIENTED_EDGE('',*,*,#1158,.F.);+#1454 = PLANE('',#1455);+#1455 = AXIS2_PLACEMENT_3D('',#1456,#1457,#1458);+#1456 = CARTESIAN_POINT('',(-9.375,-3.,0.5));+#1457 = DIRECTION('',(-0.,0.,1.));+#1458 = DIRECTION('',(1.,0.,0.));+#1459 = ADVANCED_FACE('',(#1460),#1479,.F.);+#1460 = FACE_BOUND('',#1461,.F.);+#1461 = EDGE_LOOP('',(#1462,#1463,#1464,#1465,#1466,#1467,#1468,#1474,+#1475,#1476,#1477,#1478));+#1462 = ORIENTED_EDGE('',*,*,#1258,.T.);+#1463 = ORIENTED_EDGE('',*,*,#1447,.T.);+#1464 = ORIENTED_EDGE('',*,*,#1429,.T.);+#1465 = ORIENTED_EDGE('',*,*,#1405,.T.);+#1466 = ORIENTED_EDGE('',*,*,#1380,.T.);+#1467 = ORIENTED_EDGE('',*,*,#1051,.T.);+#1468 = ORIENTED_EDGE('',*,*,#1469,.F.);+#1469 = EDGE_CURVE('',#957,#1052,#1470,.T.);+#1470 = LINE('',#1471,#1472);+#1471 = CARTESIAN_POINT('',(-6.375,-3.8,0.741609130856));+#1472 = VECTOR('',#1473,1.);+#1473 = DIRECTION('',(0.,-0.,1.));+#1474 = ORIENTED_EDGE('',*,*,#964,.T.);+#1475 = ORIENTED_EDGE('',*,*,#1355,.T.);+#1476 = ORIENTED_EDGE('',*,*,#1338,.T.);+#1477 = ORIENTED_EDGE('',*,*,#1313,.T.);+#1478 = ORIENTED_EDGE('',*,*,#1289,.T.);+#1479 = PLANE('',#1480);+#1480 = AXIS2_PLACEMENT_3D('',#1481,#1482,#1483);+#1481 = CARTESIAN_POINT('',(-6.906718560679,-3.8,1.483218261713));+#1482 = DIRECTION('',(0.,1.,0.));+#1483 = DIRECTION('',(0.,-0.,1.));+#1484 = ADVANCED_FACE('',(#1485),#1496,.T.);+#1485 = FACE_BOUND('',#1486,.T.);+#1486 = EDGE_LOOP('',(#1487,#1488,#1489,#1490));+#1487 = ORIENTED_EDGE('',*,*,#1059,.F.);+#1488 = ORIENTED_EDGE('',*,*,#1469,.F.);+#1489 = ORIENTED_EDGE('',*,*,#956,.F.);+#1490 = ORIENTED_EDGE('',*,*,#1491,.T.);+#1491 = EDGE_CURVE('',#949,#1060,#1492,.T.);+#1492 = LINE('',#1493,#1494);+#1493 = CARTESIAN_POINT('',(-6.375,-3.92,0.741609130856));+#1494 = VECTOR('',#1495,1.);+#1495 = DIRECTION('',(0.,4.439358670796E-31,1.));+#1496 = PLANE('',#1497);+#1497 = AXIS2_PLACEMENT_3D('',#1498,#1499,#1500);+#1498 = CARTESIAN_POINT('',(-6.375,-5.,0.));+#1499 = DIRECTION('',(-1.,0.,0.));+#1500 = DIRECTION('',(0.,1.,0.));+#1501 = ADVANCED_FACE('',(#1502),#1513,.F.);+#1502 = FACE_BOUND('',#1503,.F.);+#1503 = EDGE_LOOP('',(#1504,#1505,#1506,#1507));+#1504 = ORIENTED_EDGE('',*,*,#948,.T.);+#1505 = ORIENTED_EDGE('',*,*,#1491,.T.);+#1506 = ORIENTED_EDGE('',*,*,#1067,.T.);+#1507 = ORIENTED_EDGE('',*,*,#1508,.T.);+#1508 = EDGE_CURVE('',#1068,#941,#1509,.T.);+#1509 = LINE('',#1510,#1511);+#1510 = CARTESIAN_POINT('',(-5.375,-3.92,0.741609130856));+#1511 = VECTOR('',#1512,1.);+#1512 = DIRECTION('',(0.,-4.439358670796E-31,-1.));+#1513 = PLANE('',#1514);+#1514 = AXIS2_PLACEMENT_3D('',#1515,#1516,#1517);+#1515 = CARTESIAN_POINT('',(-6.906718560679,-3.92,1.483218261713));+#1516 = DIRECTION('',(5.017907410264E-31,1.,-4.439358670796E-31));+#1517 = DIRECTION('',(1.,-5.017907410264E-31,0.));+#1518 = ADVANCED_FACE('',(#1519),#1530,.T.);+#1519 = FACE_BOUND('',#1520,.T.);+#1520 = EDGE_LOOP('',(#1521,#1527,#1528,#1529));+#1521 = ORIENTED_EDGE('',*,*,#1522,.F.);+#1522 = EDGE_CURVE('',#1076,#933,#1523,.T.);+#1523 = LINE('',#1524,#1525);+#1524 = CARTESIAN_POINT('',(-5.375,-3.8,0.741609130856));+#1525 = VECTOR('',#1526,1.);+#1526 = DIRECTION('',(-0.,0.,-1.));+#1527 = ORIENTED_EDGE('',*,*,#1075,.F.);+#1528 = ORIENTED_EDGE('',*,*,#1508,.T.);+#1529 = ORIENTED_EDGE('',*,*,#940,.F.);+#1530 = PLANE('',#1531);+#1531 = AXIS2_PLACEMENT_3D('',#1532,#1533,#1534);+#1532 = CARTESIAN_POINT('',(-5.375,5.,0.));+#1533 = DIRECTION('',(1.,0.,-0.));+#1534 = DIRECTION('',(0.,-1.,0.));+#1535 = ADVANCED_FACE('',(#1536),#1542,.F.);+#1536 = FACE_BOUND('',#1537,.F.);+#1537 = EDGE_LOOP('',(#1538,#1539,#1540,#1541));+#1538 = ORIENTED_EDGE('',*,*,#1522,.F.);+#1539 = ORIENTED_EDGE('',*,*,#1083,.T.);+#1540 = ORIENTED_EDGE('',*,*,#1234,.T.);+#1541 = ORIENTED_EDGE('',*,*,#932,.T.);+#1542 = PLANE('',#1543);+#1543 = AXIS2_PLACEMENT_3D('',#1544,#1545,#1546);+#1544 = CARTESIAN_POINT('',(-6.906718560679,-3.8,1.483218261713));+#1545 = DIRECTION('',(0.,1.,0.));+#1546 = DIRECTION('',(0.,-0.,1.));+#1547 = MANIFOLD_SOLID_BREP('',#1548);+#1548 = CLOSED_SHELL('',(#1549,#1589,#1684,#1708,#1796,#1813,#1830,#1915+,#1932,#1963,#1987,#2012,#2036,#2054,#2079,#2103,#2128,#2145,#2170,+#2187,#2204,#2221));+#1549 = ADVANCED_FACE('',(#1550),#1584,.T.);+#1550 = FACE_BOUND('',#1551,.T.);+#1551 = EDGE_LOOP('',(#1552,#1562,#1570,#1578));+#1552 = ORIENTED_EDGE('',*,*,#1553,.T.);+#1553 = EDGE_CURVE('',#1554,#1556,#1558,.T.);+#1554 = VERTEX_POINT('',#1555);+#1555 = CARTESIAN_POINT('',(-5.375,-1.18,2.45));+#1556 = VERTEX_POINT('',#1557);+#1557 = CARTESIAN_POINT('',(-6.375,-1.18,2.45));+#1558 = LINE('',#1559,#1560);+#1559 = CARTESIAN_POINT('',(-4.425,-1.18,2.45));+#1560 = VECTOR('',#1561,1.);+#1561 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#1562 = ORIENTED_EDGE('',*,*,#1563,.T.);+#1563 = EDGE_CURVE('',#1556,#1564,#1566,.T.);+#1564 = VERTEX_POINT('',#1565);+#1565 = CARTESIAN_POINT('',(-6.375,-1.18,2.95));+#1566 = LINE('',#1567,#1568);+#1567 = CARTESIAN_POINT('',(-6.375,-1.18,0.741609130856));+#1568 = VECTOR('',#1569,1.);+#1569 = DIRECTION('',(0.,4.439358670796E-31,1.));+#1570 = ORIENTED_EDGE('',*,*,#1571,.T.);+#1571 = EDGE_CURVE('',#1564,#1572,#1574,.T.);+#1572 = VERTEX_POINT('',#1573);+#1573 = CARTESIAN_POINT('',(-5.375,-1.18,2.95));+#1574 = LINE('',#1575,#1576);+#1575 = CARTESIAN_POINT('',(-6.425,-1.18,2.95));+#1576 = VECTOR('',#1577,1.);+#1577 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#1578 = ORIENTED_EDGE('',*,*,#1579,.T.);+#1579 = EDGE_CURVE('',#1572,#1554,#1580,.T.);+#1580 = LINE('',#1581,#1582);+#1581 = CARTESIAN_POINT('',(-5.375,-1.18,0.741609130856));+#1582 = VECTOR('',#1583,1.);+#1583 = DIRECTION('',(0.,-4.439358670796E-31,-1.));+#1584 = PLANE('',#1585);+#1585 = AXIS2_PLACEMENT_3D('',#1586,#1587,#1588);+#1586 = CARTESIAN_POINT('',(-6.906718560679,-1.18,1.483218261713));+#1587 = DIRECTION('',(5.017907410264E-31,1.,-4.439358670796E-31));+#1588 = DIRECTION('',(1.,-5.017907410264E-31,0.));+#1589 = ADVANCED_FACE('',(#1590),#1679,.T.);+#1590 = FACE_BOUND('',#1591,.T.);+#1591 = EDGE_LOOP('',(#1592,#1593,#1601,#1609,#1617,#1625,#1633,#1641,+#1649,#1657,#1665,#1673));+#1592 = ORIENTED_EDGE('',*,*,#1553,.F.);+#1593 = ORIENTED_EDGE('',*,*,#1594,.T.);+#1594 = EDGE_CURVE('',#1554,#1595,#1597,.T.);+#1595 = VERTEX_POINT('',#1596);+#1596 = CARTESIAN_POINT('',(-5.375,-1.3,2.45));+#1597 = LINE('',#1598,#1599);+#1598 = CARTESIAN_POINT('',(-5.375,1.91,2.45));+#1599 = VECTOR('',#1600,1.);+#1600 = DIRECTION('',(0.,-1.,0.));+#1601 = ORIENTED_EDGE('',*,*,#1602,.F.);+#1602 = EDGE_CURVE('',#1603,#1595,#1605,.T.);+#1603 = VERTEX_POINT('',#1604);+#1604 = CARTESIAN_POINT('',(-4.425,-1.3,2.45));+#1605 = LINE('',#1606,#1607);+#1606 = CARTESIAN_POINT('',(-4.425,-1.3,2.45));+#1607 = VECTOR('',#1608,1.);+#1608 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#1609 = ORIENTED_EDGE('',*,*,#1610,.T.);+#1610 = EDGE_CURVE('',#1603,#1611,#1613,.T.);+#1611 = VERTEX_POINT('',#1612);+#1612 = CARTESIAN_POINT('',(-4.425,-2.1,2.45));+#1613 = LINE('',#1614,#1615);+#1614 = CARTESIAN_POINT('',(-4.425,-1.3,2.45));+#1615 = VECTOR('',#1616,1.);+#1616 = DIRECTION('',(0.,-1.,0.));+#1617 = ORIENTED_EDGE('',*,*,#1618,.T.);+#1618 = EDGE_CURVE('',#1611,#1619,#1621,.T.);+#1619 = VERTEX_POINT('',#1620);+#1620 = CARTESIAN_POINT('',(-5.375,-2.1,2.45));+#1621 = LINE('',#1622,#1623);+#1622 = CARTESIAN_POINT('',(-4.425,-2.1,2.45));+#1623 = VECTOR('',#1624,1.);+#1624 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#1625 = ORIENTED_EDGE('',*,*,#1626,.T.);+#1626 = EDGE_CURVE('',#1619,#1627,#1629,.T.);+#1627 = VERTEX_POINT('',#1628);+#1628 = CARTESIAN_POINT('',(-5.375,-2.22,2.45));+#1629 = LINE('',#1630,#1631);+#1630 = CARTESIAN_POINT('',(-5.375,1.91,2.45));+#1631 = VECTOR('',#1632,1.);+#1632 = DIRECTION('',(0.,-1.,0.));+#1633 = ORIENTED_EDGE('',*,*,#1634,.T.);+#1634 = EDGE_CURVE('',#1627,#1635,#1637,.T.);+#1635 = VERTEX_POINT('',#1636);+#1636 = CARTESIAN_POINT('',(-6.375,-2.22,2.45));+#1637 = LINE('',#1638,#1639);+#1638 = CARTESIAN_POINT('',(-4.425,-2.22,2.45));+#1639 = VECTOR('',#1640,1.);+#1640 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#1641 = ORIENTED_EDGE('',*,*,#1642,.T.);+#1642 = EDGE_CURVE('',#1635,#1643,#1645,.T.);+#1643 = VERTEX_POINT('',#1644);+#1644 = CARTESIAN_POINT('',(-6.375,-2.1,2.45));+#1645 = LINE('',#1646,#1647);+#1646 = CARTESIAN_POINT('',(-6.375,-3.09,2.45));+#1647 = VECTOR('',#1648,1.);+#1648 = DIRECTION('',(0.,1.,-0.));+#1649 = ORIENTED_EDGE('',*,*,#1650,.T.);+#1650 = EDGE_CURVE('',#1643,#1651,#1653,.T.);+#1651 = VERTEX_POINT('',#1652);+#1652 = CARTESIAN_POINT('',(-6.425,-2.1,2.45));+#1653 = LINE('',#1654,#1655);+#1654 = CARTESIAN_POINT('',(-4.425,-2.1,2.45));+#1655 = VECTOR('',#1656,1.);+#1656 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#1657 = ORIENTED_EDGE('',*,*,#1658,.F.);+#1658 = EDGE_CURVE('',#1659,#1651,#1661,.T.);+#1659 = VERTEX_POINT('',#1660);+#1660 = CARTESIAN_POINT('',(-6.425,-1.3,2.45));+#1661 = LINE('',#1662,#1663);+#1662 = CARTESIAN_POINT('',(-6.425,-1.3,2.45));+#1663 = VECTOR('',#1664,1.);+#1664 = DIRECTION('',(0.,-1.,0.));+#1665 = ORIENTED_EDGE('',*,*,#1666,.F.);+#1666 = EDGE_CURVE('',#1667,#1659,#1669,.T.);+#1667 = VERTEX_POINT('',#1668);+#1668 = CARTESIAN_POINT('',(-6.375,-1.3,2.45));+#1669 = LINE('',#1670,#1671);+#1670 = CARTESIAN_POINT('',(-4.425,-1.3,2.45));+#1671 = VECTOR('',#1672,1.);+#1672 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#1673 = ORIENTED_EDGE('',*,*,#1674,.T.);+#1674 = EDGE_CURVE('',#1667,#1556,#1675,.T.);+#1675 = LINE('',#1676,#1677);+#1676 = CARTESIAN_POINT('',(-6.375,-3.09,2.45));+#1677 = VECTOR('',#1678,1.);+#1678 = DIRECTION('',(0.,1.,-0.));+#1679 = PLANE('',#1680);+#1680 = AXIS2_PLACEMENT_3D('',#1681,#1682,#1683);+#1681 = CARTESIAN_POINT('',(-4.425,-1.18,2.45));+#1682 = DIRECTION('',(-2.22044604925E-16,-0.,-1.));+#1683 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#1684 = ADVANCED_FACE('',(#1685),#1703,.T.);+#1685 = FACE_BOUND('',#1686,.T.);+#1686 = EDGE_LOOP('',(#1687,#1688,#1696,#1702));+#1687 = ORIENTED_EDGE('',*,*,#1579,.F.);+#1688 = ORIENTED_EDGE('',*,*,#1689,.F.);+#1689 = EDGE_CURVE('',#1690,#1572,#1692,.T.);+#1690 = VERTEX_POINT('',#1691);+#1691 = CARTESIAN_POINT('',(-5.375,-1.3,2.95));+#1692 = LINE('',#1693,#1694);+#1693 = CARTESIAN_POINT('',(-5.375,1.91,2.95));+#1694 = VECTOR('',#1695,1.);+#1695 = DIRECTION('',(-0.,1.,0.));+#1696 = ORIENTED_EDGE('',*,*,#1697,.T.);+#1697 = EDGE_CURVE('',#1690,#1595,#1698,.T.);+#1698 = LINE('',#1699,#1700);+#1699 = CARTESIAN_POINT('',(-5.375,-1.3,0.741609130856));+#1700 = VECTOR('',#1701,1.);+#1701 = DIRECTION('',(-0.,0.,-1.));+#1702 = ORIENTED_EDGE('',*,*,#1594,.F.);+#1703 = PLANE('',#1704);+#1704 = AXIS2_PLACEMENT_3D('',#1705,#1706,#1707);+#1705 = CARTESIAN_POINT('',(-5.375,5.,0.));+#1706 = DIRECTION('',(1.,0.,-0.));+#1707 = DIRECTION('',(0.,-1.,0.));+#1708 = ADVANCED_FACE('',(#1709),#1791,.T.);+#1709 = FACE_BOUND('',#1710,.T.);+#1710 = EDGE_LOOP('',(#1711,#1712,#1720,#1728,#1736,#1744,#1752,#1760,+#1768,#1776,#1784,#1790));+#1711 = ORIENTED_EDGE('',*,*,#1571,.F.);+#1712 = ORIENTED_EDGE('',*,*,#1713,.T.);+#1713 = EDGE_CURVE('',#1564,#1714,#1716,.T.);+#1714 = VERTEX_POINT('',#1715);+#1715 = CARTESIAN_POINT('',(-6.375,-1.3,2.95));+#1716 = LINE('',#1717,#1718);+#1717 = CARTESIAN_POINT('',(-6.375,-3.09,2.95));+#1718 = VECTOR('',#1719,1.);+#1719 = DIRECTION('',(0.,-1.,0.));+#1720 = ORIENTED_EDGE('',*,*,#1721,.F.);+#1721 = EDGE_CURVE('',#1722,#1714,#1724,.T.);+#1722 = VERTEX_POINT('',#1723);+#1723 = CARTESIAN_POINT('',(-6.425,-1.3,2.95));+#1724 = LINE('',#1725,#1726);+#1725 = CARTESIAN_POINT('',(-6.425,-1.3,2.95));+#1726 = VECTOR('',#1727,1.);+#1727 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#1728 = ORIENTED_EDGE('',*,*,#1729,.T.);+#1729 = EDGE_CURVE('',#1722,#1730,#1732,.T.);+#1730 = VERTEX_POINT('',#1731);+#1731 = CARTESIAN_POINT('',(-6.425,-2.1,2.95));+#1732 = LINE('',#1733,#1734);+#1733 = CARTESIAN_POINT('',(-6.425,-1.3,2.95));+#1734 = VECTOR('',#1735,1.);+#1735 = DIRECTION('',(0.,-1.,0.));+#1736 = ORIENTED_EDGE('',*,*,#1737,.T.);+#1737 = EDGE_CURVE('',#1730,#1738,#1740,.T.);+#1738 = VERTEX_POINT('',#1739);+#1739 = CARTESIAN_POINT('',(-6.375,-2.1,2.95));+#1740 = LINE('',#1741,#1742);+#1741 = CARTESIAN_POINT('',(-6.425,-2.1,2.95));+#1742 = VECTOR('',#1743,1.);+#1743 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#1744 = ORIENTED_EDGE('',*,*,#1745,.T.);+#1745 = EDGE_CURVE('',#1738,#1746,#1748,.T.);+#1746 = VERTEX_POINT('',#1747);+#1747 = CARTESIAN_POINT('',(-6.375,-2.22,2.95));+#1748 = LINE('',#1749,#1750);+#1749 = CARTESIAN_POINT('',(-6.375,-3.09,2.95));+#1750 = VECTOR('',#1751,1.);+#1751 = DIRECTION('',(0.,-1.,0.));+#1752 = ORIENTED_EDGE('',*,*,#1753,.T.);+#1753 = EDGE_CURVE('',#1746,#1754,#1756,.T.);+#1754 = VERTEX_POINT('',#1755);+#1755 = CARTESIAN_POINT('',(-5.375,-2.22,2.95));+#1756 = LINE('',#1757,#1758);+#1757 = CARTESIAN_POINT('',(-6.425,-2.22,2.95));+#1758 = VECTOR('',#1759,1.);+#1759 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#1760 = ORIENTED_EDGE('',*,*,#1761,.T.);+#1761 = EDGE_CURVE('',#1754,#1762,#1764,.T.);+#1762 = VERTEX_POINT('',#1763);+#1763 = CARTESIAN_POINT('',(-5.375,-2.1,2.95));+#1764 = LINE('',#1765,#1766);+#1765 = CARTESIAN_POINT('',(-5.375,1.91,2.95));+#1766 = VECTOR('',#1767,1.);+#1767 = DIRECTION('',(-0.,1.,0.));+#1768 = ORIENTED_EDGE('',*,*,#1769,.T.);+#1769 = EDGE_CURVE('',#1762,#1770,#1772,.T.);+#1770 = VERTEX_POINT('',#1771);+#1771 = CARTESIAN_POINT('',(-4.425,-2.1,2.95));+#1772 = LINE('',#1773,#1774);+#1773 = CARTESIAN_POINT('',(-6.425,-2.1,2.95));+#1774 = VECTOR('',#1775,1.);+#1775 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#1776 = ORIENTED_EDGE('',*,*,#1777,.F.);+#1777 = EDGE_CURVE('',#1778,#1770,#1780,.T.);+#1778 = VERTEX_POINT('',#1779);+#1779 = CARTESIAN_POINT('',(-4.425,-1.3,2.95));+#1780 = LINE('',#1781,#1782);+#1781 = CARTESIAN_POINT('',(-4.425,-1.3,2.95));+#1782 = VECTOR('',#1783,1.);+#1783 = DIRECTION('',(0.,-1.,0.));+#1784 = ORIENTED_EDGE('',*,*,#1785,.F.);+#1785 = EDGE_CURVE('',#1690,#1778,#1786,.T.);+#1786 = LINE('',#1787,#1788);+#1787 = CARTESIAN_POINT('',(-6.425,-1.3,2.95));+#1788 = VECTOR('',#1789,1.);+#1789 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#1790 = ORIENTED_EDGE('',*,*,#1689,.T.);+#1791 = PLANE('',#1792);+#1792 = AXIS2_PLACEMENT_3D('',#1793,#1794,#1795);+#1793 = CARTESIAN_POINT('',(-6.425,-1.18,2.95));+#1794 = DIRECTION('',(2.22044604925E-16,0.,1.));+#1795 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#1796 = ADVANCED_FACE('',(#1797),#1808,.T.);+#1797 = FACE_BOUND('',#1798,.T.);+#1798 = EDGE_LOOP('',(#1799,#1800,#1801,#1802));+#1799 = ORIENTED_EDGE('',*,*,#1713,.F.);+#1800 = ORIENTED_EDGE('',*,*,#1563,.F.);+#1801 = ORIENTED_EDGE('',*,*,#1674,.F.);+#1802 = ORIENTED_EDGE('',*,*,#1803,.T.);+#1803 = EDGE_CURVE('',#1667,#1714,#1804,.T.);+#1804 = LINE('',#1805,#1806);+#1805 = CARTESIAN_POINT('',(-6.375,-1.3,0.741609130856));+#1806 = VECTOR('',#1807,1.);+#1807 = DIRECTION('',(0.,-0.,1.));+#1808 = PLANE('',#1809);+#1809 = AXIS2_PLACEMENT_3D('',#1810,#1811,#1812);+#1810 = CARTESIAN_POINT('',(-6.375,-5.,0.));+#1811 = DIRECTION('',(-1.,0.,0.));+#1812 = DIRECTION('',(0.,1.,0.));+#1813 = ADVANCED_FACE('',(#1814),#1825,.T.);+#1814 = FACE_BOUND('',#1815,.T.);+#1815 = EDGE_LOOP('',(#1816,#1817,#1818,#1824));+#1816 = ORIENTED_EDGE('',*,*,#1697,.F.);+#1817 = ORIENTED_EDGE('',*,*,#1785,.T.);+#1818 = ORIENTED_EDGE('',*,*,#1819,.T.);+#1819 = EDGE_CURVE('',#1778,#1603,#1820,.T.);+#1820 = LINE('',#1821,#1822);+#1821 = CARTESIAN_POINT('',(-4.425,-1.3,2.95));+#1822 = VECTOR('',#1823,1.);+#1823 = DIRECTION('',(0.,0.,-1.));+#1824 = ORIENTED_EDGE('',*,*,#1602,.T.);+#1825 = PLANE('',#1826);+#1826 = AXIS2_PLACEMENT_3D('',#1827,#1828,#1829);+#1827 = CARTESIAN_POINT('',(-6.906718560679,-1.3,1.483218261713));+#1828 = DIRECTION('',(0.,1.,0.));+#1829 = DIRECTION('',(0.,-0.,1.));+#1830 = ADVANCED_FACE('',(#1831),#1910,.T.);+#1831 = FACE_BOUND('',#1832,.T.);+#1832 = EDGE_LOOP('',(#1833,#1843,#1851,#1860,#1868,#1875,#1876,#1877,+#1878,#1887,#1895,#1904));+#1833 = ORIENTED_EDGE('',*,*,#1834,.T.);+#1834 = EDGE_CURVE('',#1835,#1837,#1839,.T.);+#1835 = VERTEX_POINT('',#1836);+#1836 = CARTESIAN_POINT('',(-9.375,-1.3,1.015962243071E-15));+#1837 = VERTEX_POINT('',#1838);+#1838 = CARTESIAN_POINT('',(-9.375,-1.3,0.5));+#1839 = LINE('',#1840,#1841);+#1840 = CARTESIAN_POINT('',(-9.375,-1.3,1.015962243071E-15));+#1841 = VECTOR('',#1842,1.);+#1842 = DIRECTION('',(0.,0.,1.));+#1843 = ORIENTED_EDGE('',*,*,#1844,.T.);+#1844 = EDGE_CURVE('',#1837,#1845,#1847,.T.);+#1845 = VERTEX_POINT('',#1846);+#1846 = CARTESIAN_POINT('',(-7.425,-1.3,0.5));+#1847 = LINE('',#1848,#1849);+#1848 = CARTESIAN_POINT('',(-9.375,-1.3,0.5));+#1849 = VECTOR('',#1850,1.);+#1850 = DIRECTION('',(1.,0.,0.));+#1851 = ORIENTED_EDGE('',*,*,#1852,.T.);+#1852 = EDGE_CURVE('',#1845,#1853,#1855,.T.);+#1853 = VERTEX_POINT('',#1854);+#1854 = CARTESIAN_POINT('',(-7.175,-1.3,0.75));+#1855 = CIRCLE('',#1856,0.25);+#1856 = AXIS2_PLACEMENT_3D('',#1857,#1858,#1859);+#1857 = CARTESIAN_POINT('',(-7.425,-1.3,0.75));+#1858 = DIRECTION('',(0.,-1.,0.));+#1859 = DIRECTION('',(3.5527136788E-15,0.,-1.));+#1860 = ORIENTED_EDGE('',*,*,#1861,.T.);+#1861 = EDGE_CURVE('',#1853,#1862,#1864,.T.);+#1862 = VERTEX_POINT('',#1863);+#1863 = CARTESIAN_POINT('',(-7.175,-1.3,2.2));+#1864 = LINE('',#1865,#1866);+#1865 = CARTESIAN_POINT('',(-7.175,-1.3,0.75));+#1866 = VECTOR('',#1867,1.);+#1867 = DIRECTION('',(0.,0.,1.));+#1868 = ORIENTED_EDGE('',*,*,#1869,.T.);+#1869 = EDGE_CURVE('',#1862,#1722,#1870,.T.);+#1870 = CIRCLE('',#1871,0.75);+#1871 = AXIS2_PLACEMENT_3D('',#1872,#1873,#1874);+#1872 = CARTESIAN_POINT('',(-6.425,-1.3,2.2));+#1873 = DIRECTION('',(0.,1.,0.));+#1874 = DIRECTION('',(-1.,0.,5.921189464667E-16));+#1875 = ORIENTED_EDGE('',*,*,#1721,.T.);+#1876 = ORIENTED_EDGE('',*,*,#1803,.F.);+#1877 = ORIENTED_EDGE('',*,*,#1666,.T.);+#1878 = ORIENTED_EDGE('',*,*,#1879,.T.);+#1879 = EDGE_CURVE('',#1659,#1880,#1882,.T.);+#1880 = VERTEX_POINT('',#1881);+#1881 = CARTESIAN_POINT('',(-6.675,-1.3,2.2));+#1882 = CIRCLE('',#1883,0.25);+#1883 = AXIS2_PLACEMENT_3D('',#1884,#1885,#1886);+#1884 = CARTESIAN_POINT('',(-6.425,-1.3,2.2));+#1885 = DIRECTION('',(0.,-1.,0.));+#1886 = DIRECTION('',(-3.5527136788E-15,0.,1.));+#1887 = ORIENTED_EDGE('',*,*,#1888,.T.);+#1888 = EDGE_CURVE('',#1880,#1889,#1891,.T.);+#1889 = VERTEX_POINT('',#1890);+#1890 = CARTESIAN_POINT('',(-6.675,-1.3,0.75));+#1891 = LINE('',#1892,#1893);+#1892 = CARTESIAN_POINT('',(-6.675,-1.3,2.2));+#1893 = VECTOR('',#1894,1.);+#1894 = DIRECTION('',(0.,0.,-1.));+#1895 = ORIENTED_EDGE('',*,*,#1896,.T.);+#1896 = EDGE_CURVE('',#1889,#1897,#1899,.T.);+#1897 = VERTEX_POINT('',#1898);+#1898 = CARTESIAN_POINT('',(-7.425,-1.3,5.551115123126E-16));+#1899 = CIRCLE('',#1900,0.75);+#1900 = AXIS2_PLACEMENT_3D('',#1901,#1902,#1903);+#1901 = CARTESIAN_POINT('',(-7.425,-1.3,0.75));+#1902 = DIRECTION('',(0.,1.,0.));+#1903 = DIRECTION('',(1.,0.,-8.881784197001E-16));+#1904 = ORIENTED_EDGE('',*,*,#1905,.T.);+#1905 = EDGE_CURVE('',#1897,#1835,#1906,.T.);+#1906 = LINE('',#1907,#1908);+#1907 = CARTESIAN_POINT('',(-7.425,-1.3,5.551115123126E-16));+#1908 = VECTOR('',#1909,1.);+#1909 = DIRECTION('',(-1.,0.,2.363337080814E-16));+#1910 = PLANE('',#1911);+#1911 = AXIS2_PLACEMENT_3D('',#1912,#1913,#1914);+#1912 = CARTESIAN_POINT('',(-6.906718560679,-1.3,1.483218261713));+#1913 = DIRECTION('',(0.,1.,0.));+#1914 = DIRECTION('',(0.,-0.,1.));+#1915 = ADVANCED_FACE('',(#1916),#1927,.T.);+#1916 = FACE_BOUND('',#1917,.T.);+#1917 = EDGE_LOOP('',(#1918,#1919,#1925,#1926));+#1918 = ORIENTED_EDGE('',*,*,#1777,.T.);+#1919 = ORIENTED_EDGE('',*,*,#1920,.T.);+#1920 = EDGE_CURVE('',#1770,#1611,#1921,.T.);+#1921 = LINE('',#1922,#1923);+#1922 = CARTESIAN_POINT('',(-4.425,-2.1,2.95));+#1923 = VECTOR('',#1924,1.);+#1924 = DIRECTION('',(0.,0.,-1.));+#1925 = ORIENTED_EDGE('',*,*,#1610,.F.);+#1926 = ORIENTED_EDGE('',*,*,#1819,.F.);+#1927 = PLANE('',#1928);+#1928 = AXIS2_PLACEMENT_3D('',#1929,#1930,#1931);+#1929 = CARTESIAN_POINT('',(-4.425,-1.3,2.95));+#1930 = DIRECTION('',(1.,0.,0.));+#1931 = DIRECTION('',(0.,0.,-1.));+#1932 = ADVANCED_FACE('',(#1933),#1958,.T.);+#1933 = FACE_BOUND('',#1934,.T.);+#1934 = EDGE_LOOP('',(#1935,#1943,#1951,#1957));+#1935 = ORIENTED_EDGE('',*,*,#1936,.T.);+#1936 = EDGE_CURVE('',#1835,#1937,#1939,.T.);+#1937 = VERTEX_POINT('',#1938);+#1938 = CARTESIAN_POINT('',(-9.375,-2.1,1.015962243071E-15));+#1939 = LINE('',#1940,#1941);+#1940 = CARTESIAN_POINT('',(-9.375,-1.3,1.015962243071E-15));+#1941 = VECTOR('',#1942,1.);+#1942 = DIRECTION('',(0.,-1.,0.));+#1943 = ORIENTED_EDGE('',*,*,#1944,.T.);+#1944 = EDGE_CURVE('',#1937,#1945,#1947,.T.);+#1945 = VERTEX_POINT('',#1946);+#1946 = CARTESIAN_POINT('',(-9.375,-2.1,0.5));+#1947 = LINE('',#1948,#1949);+#1948 = CARTESIAN_POINT('',(-9.375,-2.1,1.015962243071E-15));+#1949 = VECTOR('',#1950,1.);+#1950 = DIRECTION('',(0.,0.,1.));+#1951 = ORIENTED_EDGE('',*,*,#1952,.F.);+#1952 = EDGE_CURVE('',#1837,#1945,#1953,.T.);+#1953 = LINE('',#1954,#1955);+#1954 = CARTESIAN_POINT('',(-9.375,-1.3,0.5));+#1955 = VECTOR('',#1956,1.);+#1956 = DIRECTION('',(0.,-1.,0.));+#1957 = ORIENTED_EDGE('',*,*,#1834,.F.);+#1958 = PLANE('',#1959);+#1959 = AXIS2_PLACEMENT_3D('',#1960,#1961,#1962);+#1960 = CARTESIAN_POINT('',(-9.375,-1.3,1.015962243071E-15));+#1961 = DIRECTION('',(-1.,0.,0.));+#1962 = DIRECTION('',(0.,0.,1.));+#1963 = ADVANCED_FACE('',(#1964),#1982,.T.);+#1964 = FACE_BOUND('',#1965,.T.);+#1965 = EDGE_LOOP('',(#1966,#1974,#1980,#1981));+#1966 = ORIENTED_EDGE('',*,*,#1967,.T.);+#1967 = EDGE_CURVE('',#1897,#1968,#1970,.T.);+#1968 = VERTEX_POINT('',#1969);+#1969 = CARTESIAN_POINT('',(-7.425,-2.1,5.551115123126E-16));+#1970 = LINE('',#1971,#1972);+#1971 = CARTESIAN_POINT('',(-7.425,-1.3,5.551115123126E-16));+#1972 = VECTOR('',#1973,1.);+#1973 = DIRECTION('',(0.,-1.,0.));+#1974 = ORIENTED_EDGE('',*,*,#1975,.T.);+#1975 = EDGE_CURVE('',#1968,#1937,#1976,.T.);+#1976 = LINE('',#1977,#1978);+#1977 = CARTESIAN_POINT('',(-7.425,-2.1,5.551115123126E-16));+#1978 = VECTOR('',#1979,1.);+#1979 = DIRECTION('',(-1.,0.,2.363337080814E-16));+#1980 = ORIENTED_EDGE('',*,*,#1936,.F.);+#1981 = ORIENTED_EDGE('',*,*,#1905,.F.);+#1982 = PLANE('',#1983);+#1983 = AXIS2_PLACEMENT_3D('',#1984,#1985,#1986);+#1984 = CARTESIAN_POINT('',(-7.425,-1.3,5.551115123126E-16));+#1985 = DIRECTION('',(-2.363337080814E-16,-0.,-1.));+#1986 = DIRECTION('',(-1.,0.,2.363337080814E-16));+#1987 = ADVANCED_FACE('',(#1988),#2007,.T.);+#1988 = FACE_BOUND('',#1989,.T.);+#1989 = EDGE_LOOP('',(#1990,#1998,#2005,#2006));+#1990 = ORIENTED_EDGE('',*,*,#1991,.T.);+#1991 = EDGE_CURVE('',#1889,#1992,#1994,.T.);+#1992 = VERTEX_POINT('',#1993);+#1993 = CARTESIAN_POINT('',(-6.675,-2.1,0.75));+#1994 = LINE('',#1995,#1996);+#1995 = CARTESIAN_POINT('',(-6.675,-1.3,0.75));+#1996 = VECTOR('',#1997,1.);+#1997 = DIRECTION('',(0.,-1.,0.));+#1998 = ORIENTED_EDGE('',*,*,#1999,.T.);+#1999 = EDGE_CURVE('',#1992,#1968,#2000,.T.);+#2000 = CIRCLE('',#2001,0.75);+#2001 = AXIS2_PLACEMENT_3D('',#2002,#2003,#2004);+#2002 = CARTESIAN_POINT('',(-7.425,-2.1,0.75));+#2003 = DIRECTION('',(0.,1.,0.));+#2004 = DIRECTION('',(1.,0.,-8.881784197001E-16));+#2005 = ORIENTED_EDGE('',*,*,#1967,.F.);+#2006 = ORIENTED_EDGE('',*,*,#1896,.F.);+#2007 = CYLINDRICAL_SURFACE('',#2008,0.75);+#2008 = AXIS2_PLACEMENT_3D('',#2009,#2010,#2011);+#2009 = CARTESIAN_POINT('',(-7.425,-1.3,0.75));+#2010 = DIRECTION('',(0.,1.,0.));+#2011 = DIRECTION('',(1.,0.,-8.881784197001E-16));+#2012 = ADVANCED_FACE('',(#2013),#2031,.T.);+#2013 = FACE_BOUND('',#2014,.T.);+#2014 = EDGE_LOOP('',(#2015,#2023,#2029,#2030));+#2015 = ORIENTED_EDGE('',*,*,#2016,.T.);+#2016 = EDGE_CURVE('',#1880,#2017,#2019,.T.);+#2017 = VERTEX_POINT('',#2018);+#2018 = CARTESIAN_POINT('',(-6.675,-2.1,2.2));+#2019 = LINE('',#2020,#2021);+#2020 = CARTESIAN_POINT('',(-6.675,-1.3,2.2));+#2021 = VECTOR('',#2022,1.);+#2022 = DIRECTION('',(0.,-1.,0.));+#2023 = ORIENTED_EDGE('',*,*,#2024,.T.);+#2024 = EDGE_CURVE('',#2017,#1992,#2025,.T.);+#2025 = LINE('',#2026,#2027);+#2026 = CARTESIAN_POINT('',(-6.675,-2.1,2.2));+#2027 = VECTOR('',#2028,1.);+#2028 = DIRECTION('',(0.,0.,-1.));+#2029 = ORIENTED_EDGE('',*,*,#1991,.F.);+#2030 = ORIENTED_EDGE('',*,*,#1888,.F.);+#2031 = PLANE('',#2032);+#2032 = AXIS2_PLACEMENT_3D('',#2033,#2034,#2035);+#2033 = CARTESIAN_POINT('',(-6.675,-1.3,2.2));+#2034 = DIRECTION('',(1.,0.,0.));+#2035 = DIRECTION('',(0.,0.,-1.));+#2036 = ADVANCED_FACE('',(#2037),#2049,.F.);+#2037 = FACE_BOUND('',#2038,.T.);+#2038 = EDGE_LOOP('',(#2039,#2040,#2047,#2048));+#2039 = ORIENTED_EDGE('',*,*,#1658,.T.);+#2040 = ORIENTED_EDGE('',*,*,#2041,.T.);+#2041 = EDGE_CURVE('',#1651,#2017,#2042,.T.);+#2042 = CIRCLE('',#2043,0.25);+#2043 = AXIS2_PLACEMENT_3D('',#2044,#2045,#2046);+#2044 = CARTESIAN_POINT('',(-6.425,-2.1,2.2));+#2045 = DIRECTION('',(0.,-1.,0.));+#2046 = DIRECTION('',(-3.5527136788E-15,0.,1.));+#2047 = ORIENTED_EDGE('',*,*,#2016,.F.);+#2048 = ORIENTED_EDGE('',*,*,#1879,.F.);+#2049 = CYLINDRICAL_SURFACE('',#2050,0.25);+#2050 = AXIS2_PLACEMENT_3D('',#2051,#2052,#2053);+#2051 = CARTESIAN_POINT('',(-6.425,-1.3,2.2));+#2052 = DIRECTION('',(-0.,1.,-0.));+#2053 = DIRECTION('',(-3.5527136788E-15,0.,1.));+#2054 = ADVANCED_FACE('',(#2055),#2074,.T.);+#2055 = FACE_BOUND('',#2056,.T.);+#2056 = EDGE_LOOP('',(#2057,#2065,#2072,#2073));+#2057 = ORIENTED_EDGE('',*,*,#2058,.T.);+#2058 = EDGE_CURVE('',#1862,#2059,#2061,.T.);+#2059 = VERTEX_POINT('',#2060);+#2060 = CARTESIAN_POINT('',(-7.175,-2.1,2.2));+#2061 = LINE('',#2062,#2063);+#2062 = CARTESIAN_POINT('',(-7.175,-1.3,2.2));+#2063 = VECTOR('',#2064,1.);+#2064 = DIRECTION('',(0.,-1.,0.));+#2065 = ORIENTED_EDGE('',*,*,#2066,.T.);+#2066 = EDGE_CURVE('',#2059,#1730,#2067,.T.);+#2067 = CIRCLE('',#2068,0.75);+#2068 = AXIS2_PLACEMENT_3D('',#2069,#2070,#2071);+#2069 = CARTESIAN_POINT('',(-6.425,-2.1,2.2));+#2070 = DIRECTION('',(0.,1.,0.));+#2071 = DIRECTION('',(-1.,0.,5.921189464667E-16));+#2072 = ORIENTED_EDGE('',*,*,#1729,.F.);+#2073 = ORIENTED_EDGE('',*,*,#1869,.F.);+#2074 = CYLINDRICAL_SURFACE('',#2075,0.75);+#2075 = AXIS2_PLACEMENT_3D('',#2076,#2077,#2078);+#2076 = CARTESIAN_POINT('',(-6.425,-1.3,2.2));+#2077 = DIRECTION('',(0.,1.,0.));+#2078 = DIRECTION('',(-1.,0.,5.921189464667E-16));+#2079 = ADVANCED_FACE('',(#2080),#2098,.T.);+#2080 = FACE_BOUND('',#2081,.T.);+#2081 = EDGE_LOOP('',(#2082,#2090,#2096,#2097));+#2082 = ORIENTED_EDGE('',*,*,#2083,.T.);+#2083 = EDGE_CURVE('',#1853,#2084,#2086,.T.);+#2084 = VERTEX_POINT('',#2085);+#2085 = CARTESIAN_POINT('',(-7.175,-2.1,0.75));+#2086 = LINE('',#2087,#2088);+#2087 = CARTESIAN_POINT('',(-7.175,-1.3,0.75));+#2088 = VECTOR('',#2089,1.);+#2089 = DIRECTION('',(0.,-1.,0.));+#2090 = ORIENTED_EDGE('',*,*,#2091,.T.);+#2091 = EDGE_CURVE('',#2084,#2059,#2092,.T.);+#2092 = LINE('',#2093,#2094);+#2093 = CARTESIAN_POINT('',(-7.175,-2.1,0.75));+#2094 = VECTOR('',#2095,1.);+#2095 = DIRECTION('',(0.,0.,1.));+#2096 = ORIENTED_EDGE('',*,*,#2058,.F.);+#2097 = ORIENTED_EDGE('',*,*,#1861,.F.);+#2098 = PLANE('',#2099);+#2099 = AXIS2_PLACEMENT_3D('',#2100,#2101,#2102);+#2100 = CARTESIAN_POINT('',(-7.175,-1.3,0.75));+#2101 = DIRECTION('',(-1.,0.,0.));+#2102 = DIRECTION('',(0.,0.,1.));+#2103 = ADVANCED_FACE('',(#2104),#2123,.F.);+#2104 = FACE_BOUND('',#2105,.T.);+#2105 = EDGE_LOOP('',(#2106,#2114,#2121,#2122));+#2106 = ORIENTED_EDGE('',*,*,#2107,.T.);+#2107 = EDGE_CURVE('',#1845,#2108,#2110,.T.);+#2108 = VERTEX_POINT('',#2109);+#2109 = CARTESIAN_POINT('',(-7.425,-2.1,0.5));+#2110 = LINE('',#2111,#2112);+#2111 = CARTESIAN_POINT('',(-7.425,-1.3,0.5));+#2112 = VECTOR('',#2113,1.);+#2113 = DIRECTION('',(0.,-1.,0.));+#2114 = ORIENTED_EDGE('',*,*,#2115,.T.);+#2115 = EDGE_CURVE('',#2108,#2084,#2116,.T.);+#2116 = CIRCLE('',#2117,0.25);+#2117 = AXIS2_PLACEMENT_3D('',#2118,#2119,#2120);+#2118 = CARTESIAN_POINT('',(-7.425,-2.1,0.75));+#2119 = DIRECTION('',(0.,-1.,0.));+#2120 = DIRECTION('',(3.5527136788E-15,0.,-1.));+#2121 = ORIENTED_EDGE('',*,*,#2083,.F.);+#2122 = ORIENTED_EDGE('',*,*,#1852,.F.);+#2123 = CYLINDRICAL_SURFACE('',#2124,0.25);+#2124 = AXIS2_PLACEMENT_3D('',#2125,#2126,#2127);+#2125 = CARTESIAN_POINT('',(-7.425,-1.3,0.75));+#2126 = DIRECTION('',(-0.,1.,-0.));+#2127 = DIRECTION('',(3.5527136788E-15,0.,-1.));+#2128 = ADVANCED_FACE('',(#2129),#2140,.T.);+#2129 = FACE_BOUND('',#2130,.T.);+#2130 = EDGE_LOOP('',(#2131,#2132,#2138,#2139));+#2131 = ORIENTED_EDGE('',*,*,#1952,.T.);+#2132 = ORIENTED_EDGE('',*,*,#2133,.T.);+#2133 = EDGE_CURVE('',#1945,#2108,#2134,.T.);+#2134 = LINE('',#2135,#2136);+#2135 = CARTESIAN_POINT('',(-9.375,-2.1,0.5));+#2136 = VECTOR('',#2137,1.);+#2137 = DIRECTION('',(1.,0.,0.));+#2138 = ORIENTED_EDGE('',*,*,#2107,.F.);+#2139 = ORIENTED_EDGE('',*,*,#1844,.F.);+#2140 = PLANE('',#2141);+#2141 = AXIS2_PLACEMENT_3D('',#2142,#2143,#2144);+#2142 = CARTESIAN_POINT('',(-9.375,-1.3,0.5));+#2143 = DIRECTION('',(-0.,0.,1.));+#2144 = DIRECTION('',(1.,0.,0.));+#2145 = ADVANCED_FACE('',(#2146),#2165,.F.);+#2146 = FACE_BOUND('',#2147,.F.);+#2147 = EDGE_LOOP('',(#2148,#2149,#2150,#2151,#2152,#2153,#2154,#2160,+#2161,#2162,#2163,#2164));+#2148 = ORIENTED_EDGE('',*,*,#1944,.T.);+#2149 = ORIENTED_EDGE('',*,*,#2133,.T.);+#2150 = ORIENTED_EDGE('',*,*,#2115,.T.);+#2151 = ORIENTED_EDGE('',*,*,#2091,.T.);+#2152 = ORIENTED_EDGE('',*,*,#2066,.T.);+#2153 = ORIENTED_EDGE('',*,*,#1737,.T.);+#2154 = ORIENTED_EDGE('',*,*,#2155,.F.);+#2155 = EDGE_CURVE('',#1643,#1738,#2156,.T.);+#2156 = LINE('',#2157,#2158);+#2157 = CARTESIAN_POINT('',(-6.375,-2.1,0.741609130856));+#2158 = VECTOR('',#2159,1.);+#2159 = DIRECTION('',(0.,-0.,1.));+#2160 = ORIENTED_EDGE('',*,*,#1650,.T.);+#2161 = ORIENTED_EDGE('',*,*,#2041,.T.);+#2162 = ORIENTED_EDGE('',*,*,#2024,.T.);+#2163 = ORIENTED_EDGE('',*,*,#1999,.T.);+#2164 = ORIENTED_EDGE('',*,*,#1975,.T.);+#2165 = PLANE('',#2166);+#2166 = AXIS2_PLACEMENT_3D('',#2167,#2168,#2169);+#2167 = CARTESIAN_POINT('',(-6.906718560679,-2.1,1.483218261713));+#2168 = DIRECTION('',(0.,1.,0.));+#2169 = DIRECTION('',(0.,-0.,1.));+#2170 = ADVANCED_FACE('',(#2171),#2182,.T.);+#2171 = FACE_BOUND('',#2172,.T.);+#2172 = EDGE_LOOP('',(#2173,#2174,#2175,#2176));+#2173 = ORIENTED_EDGE('',*,*,#1745,.F.);+#2174 = ORIENTED_EDGE('',*,*,#2155,.F.);+#2175 = ORIENTED_EDGE('',*,*,#1642,.F.);+#2176 = ORIENTED_EDGE('',*,*,#2177,.T.);+#2177 = EDGE_CURVE('',#1635,#1746,#2178,.T.);+#2178 = LINE('',#2179,#2180);+#2179 = CARTESIAN_POINT('',(-6.375,-2.22,0.741609130856));+#2180 = VECTOR('',#2181,1.);+#2181 = DIRECTION('',(0.,4.439358670796E-31,1.));+#2182 = PLANE('',#2183);+#2183 = AXIS2_PLACEMENT_3D('',#2184,#2185,#2186);+#2184 = CARTESIAN_POINT('',(-6.375,-5.,0.));+#2185 = DIRECTION('',(-1.,0.,0.));+#2186 = DIRECTION('',(0.,1.,0.));+#2187 = ADVANCED_FACE('',(#2188),#2199,.F.);+#2188 = FACE_BOUND('',#2189,.F.);+#2189 = EDGE_LOOP('',(#2190,#2191,#2192,#2193));+#2190 = ORIENTED_EDGE('',*,*,#1634,.T.);+#2191 = ORIENTED_EDGE('',*,*,#2177,.T.);+#2192 = ORIENTED_EDGE('',*,*,#1753,.T.);+#2193 = ORIENTED_EDGE('',*,*,#2194,.T.);+#2194 = EDGE_CURVE('',#1754,#1627,#2195,.T.);+#2195 = LINE('',#2196,#2197);+#2196 = CARTESIAN_POINT('',(-5.375,-2.22,0.741609130856));+#2197 = VECTOR('',#2198,1.);+#2198 = DIRECTION('',(0.,-4.439358670796E-31,-1.));+#2199 = PLANE('',#2200);+#2200 = AXIS2_PLACEMENT_3D('',#2201,#2202,#2203);+#2201 = CARTESIAN_POINT('',(-6.906718560679,-2.22,1.483218261713));+#2202 = DIRECTION('',(5.017907410264E-31,1.,-4.439358670796E-31));+#2203 = DIRECTION('',(1.,-5.017907410264E-31,0.));+#2204 = ADVANCED_FACE('',(#2205),#2216,.T.);+#2205 = FACE_BOUND('',#2206,.T.);+#2206 = EDGE_LOOP('',(#2207,#2213,#2214,#2215));+#2207 = ORIENTED_EDGE('',*,*,#2208,.F.);+#2208 = EDGE_CURVE('',#1762,#1619,#2209,.T.);+#2209 = LINE('',#2210,#2211);+#2210 = CARTESIAN_POINT('',(-5.375,-2.1,0.741609130856));+#2211 = VECTOR('',#2212,1.);+#2212 = DIRECTION('',(-0.,0.,-1.));+#2213 = ORIENTED_EDGE('',*,*,#1761,.F.);+#2214 = ORIENTED_EDGE('',*,*,#2194,.T.);+#2215 = ORIENTED_EDGE('',*,*,#1626,.F.);+#2216 = PLANE('',#2217);+#2217 = AXIS2_PLACEMENT_3D('',#2218,#2219,#2220);+#2218 = CARTESIAN_POINT('',(-5.375,5.,0.));+#2219 = DIRECTION('',(1.,0.,-0.));+#2220 = DIRECTION('',(0.,-1.,0.));+#2221 = ADVANCED_FACE('',(#2222),#2228,.F.);+#2222 = FACE_BOUND('',#2223,.F.);+#2223 = EDGE_LOOP('',(#2224,#2225,#2226,#2227));+#2224 = ORIENTED_EDGE('',*,*,#2208,.F.);+#2225 = ORIENTED_EDGE('',*,*,#1769,.T.);+#2226 = ORIENTED_EDGE('',*,*,#1920,.T.);+#2227 = ORIENTED_EDGE('',*,*,#1618,.T.);+#2228 = PLANE('',#2229);+#2229 = AXIS2_PLACEMENT_3D('',#2230,#2231,#2232);+#2230 = CARTESIAN_POINT('',(-6.906718560679,-2.1,1.483218261713));+#2231 = DIRECTION('',(0.,1.,0.));+#2232 = DIRECTION('',(0.,-0.,1.));+#2233 = MANIFOLD_SOLID_BREP('',#2234);+#2234 = CLOSED_SHELL('',(#2235,#2275,#2306,#2362,#2386,#2435,#2452,#2469+,#2486,#2503));+#2235 = ADVANCED_FACE('',(#2236),#2270,.T.);+#2236 = FACE_BOUND('',#2237,.T.);+#2237 = EDGE_LOOP('',(#2238,#2248,#2256,#2264));+#2238 = ORIENTED_EDGE('',*,*,#2239,.T.);+#2239 = EDGE_CURVE('',#2240,#2242,#2244,.T.);+#2240 = VERTEX_POINT('',#2241);+#2241 = CARTESIAN_POINT('',(-5.375,0.52,2.95));+#2242 = VERTEX_POINT('',#2243);+#2243 = CARTESIAN_POINT('',(-5.375,0.52,2.45));+#2244 = LINE('',#2245,#2246);+#2245 = CARTESIAN_POINT('',(-5.375,0.52,0.741609130856));+#2246 = VECTOR('',#2247,1.);+#2247 = DIRECTION('',(0.,-4.439358670796E-31,-1.));+#2248 = ORIENTED_EDGE('',*,*,#2249,.T.);+#2249 = EDGE_CURVE('',#2242,#2250,#2252,.T.);+#2250 = VERTEX_POINT('',#2251);+#2251 = CARTESIAN_POINT('',(-5.725,0.52,2.45));+#2252 = LINE('',#2253,#2254);+#2253 = CARTESIAN_POINT('',(-4.425,0.52,2.45));+#2254 = VECTOR('',#2255,1.);+#2255 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#2256 = ORIENTED_EDGE('',*,*,#2257,.T.);+#2257 = EDGE_CURVE('',#2250,#2258,#2260,.T.);+#2258 = VERTEX_POINT('',#2259);+#2259 = CARTESIAN_POINT('',(-5.725,0.52,2.95));+#2260 = LINE('',#2261,#2262);+#2261 = CARTESIAN_POINT('',(-5.725,0.52,0.));+#2262 = VECTOR('',#2263,1.);+#2263 = DIRECTION('',(0.,0.,1.));+#2264 = ORIENTED_EDGE('',*,*,#2265,.T.);+#2265 = EDGE_CURVE('',#2258,#2240,#2266,.T.);+#2266 = LINE('',#2267,#2268);+#2267 = CARTESIAN_POINT('',(-6.425,0.52,2.95));+#2268 = VECTOR('',#2269,1.);+#2269 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#2270 = PLANE('',#2271);+#2271 = AXIS2_PLACEMENT_3D('',#2272,#2273,#2274);+#2272 = CARTESIAN_POINT('',(-6.906718560679,0.52,1.483218261713));+#2273 = DIRECTION('',(5.017907410264E-31,1.,-4.439358670796E-31));+#2274 = DIRECTION('',(1.,-5.017907410264E-31,0.));+#2275 = ADVANCED_FACE('',(#2276),#2301,.T.);+#2276 = FACE_BOUND('',#2277,.T.);+#2277 = EDGE_LOOP('',(#2278,#2279,#2287,#2295));+#2278 = ORIENTED_EDGE('',*,*,#2239,.F.);+#2279 = ORIENTED_EDGE('',*,*,#2280,.F.);+#2280 = EDGE_CURVE('',#2281,#2240,#2283,.T.);+#2281 = VERTEX_POINT('',#2282);+#2282 = CARTESIAN_POINT('',(-5.375,0.4,2.95));+#2283 = LINE('',#2284,#2285);+#2284 = CARTESIAN_POINT('',(-5.375,2.76,2.95));+#2285 = VECTOR('',#2286,1.);+#2286 = DIRECTION('',(-0.,1.,0.));+#2287 = ORIENTED_EDGE('',*,*,#2288,.T.);+#2288 = EDGE_CURVE('',#2281,#2289,#2291,.T.);+#2289 = VERTEX_POINT('',#2290);+#2290 = CARTESIAN_POINT('',(-5.375,0.4,2.45));+#2291 = LINE('',#2292,#2293);+#2292 = CARTESIAN_POINT('',(-5.375,0.4,0.741609130856));+#2293 = VECTOR('',#2294,1.);+#2294 = DIRECTION('',(-0.,0.,-1.));+#2295 = ORIENTED_EDGE('',*,*,#2296,.F.);+#2296 = EDGE_CURVE('',#2242,#2289,#2297,.T.);+#2297 = LINE('',#2298,#2299);+#2298 = CARTESIAN_POINT('',(-5.375,2.76,2.45));+#2299 = VECTOR('',#2300,1.);+#2300 = DIRECTION('',(0.,-1.,0.));+#2301 = PLANE('',#2302);+#2302 = AXIS2_PLACEMENT_3D('',#2303,#2304,#2305);+#2303 = CARTESIAN_POINT('',(-5.375,5.,0.));+#2304 = DIRECTION('',(1.,0.,-0.));+#2305 = DIRECTION('',(0.,-1.,0.));+#2306 = ADVANCED_FACE('',(#2307),#2357,.T.);+#2307 = FACE_BOUND('',#2308,.T.);+#2308 = EDGE_LOOP('',(#2309,#2310,#2318,#2326,#2334,#2342,#2350,#2356));+#2309 = ORIENTED_EDGE('',*,*,#2265,.F.);+#2310 = ORIENTED_EDGE('',*,*,#2311,.T.);+#2311 = EDGE_CURVE('',#2258,#2312,#2314,.T.);+#2312 = VERTEX_POINT('',#2313);+#2313 = CARTESIAN_POINT('',(-5.725,-0.52,2.95));+#2314 = LINE('',#2315,#2316);+#2315 = CARTESIAN_POINT('',(-5.725,0.,2.95));+#2316 = VECTOR('',#2317,1.);+#2317 = DIRECTION('',(0.,-1.,0.));+#2318 = ORIENTED_EDGE('',*,*,#2319,.T.);+#2319 = EDGE_CURVE('',#2312,#2320,#2322,.T.);+#2320 = VERTEX_POINT('',#2321);+#2321 = CARTESIAN_POINT('',(-5.375,-0.52,2.95));+#2322 = LINE('',#2323,#2324);+#2323 = CARTESIAN_POINT('',(-6.425,-0.52,2.95));+#2324 = VECTOR('',#2325,1.);+#2325 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#2326 = ORIENTED_EDGE('',*,*,#2327,.T.);+#2327 = EDGE_CURVE('',#2320,#2328,#2330,.T.);+#2328 = VERTEX_POINT('',#2329);+#2329 = CARTESIAN_POINT('',(-5.375,-0.4,2.95));+#2330 = LINE('',#2331,#2332);+#2331 = CARTESIAN_POINT('',(-5.375,2.76,2.95));+#2332 = VECTOR('',#2333,1.);+#2333 = DIRECTION('',(-0.,1.,0.));+#2334 = ORIENTED_EDGE('',*,*,#2335,.T.);+#2335 = EDGE_CURVE('',#2328,#2336,#2338,.T.);+#2336 = VERTEX_POINT('',#2337);+#2337 = CARTESIAN_POINT('',(-4.425,-0.4,2.95));+#2338 = LINE('',#2339,#2340);+#2339 = CARTESIAN_POINT('',(-6.425,-0.4,2.95));+#2340 = VECTOR('',#2341,1.);+#2341 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#2342 = ORIENTED_EDGE('',*,*,#2343,.F.);+#2343 = EDGE_CURVE('',#2344,#2336,#2346,.T.);+#2344 = VERTEX_POINT('',#2345);+#2345 = CARTESIAN_POINT('',(-4.425,0.4,2.95));+#2346 = LINE('',#2347,#2348);+#2347 = CARTESIAN_POINT('',(-4.425,0.4,2.95));+#2348 = VECTOR('',#2349,1.);+#2349 = DIRECTION('',(0.,-1.,0.));+#2350 = ORIENTED_EDGE('',*,*,#2351,.F.);+#2351 = EDGE_CURVE('',#2281,#2344,#2352,.T.);+#2352 = LINE('',#2353,#2354);+#2353 = CARTESIAN_POINT('',(-6.425,0.4,2.95));+#2354 = VECTOR('',#2355,1.);+#2355 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#2356 = ORIENTED_EDGE('',*,*,#2280,.T.);+#2357 = PLANE('',#2358);+#2358 = AXIS2_PLACEMENT_3D('',#2359,#2360,#2361);+#2359 = CARTESIAN_POINT('',(-6.425,0.52,2.95));+#2360 = DIRECTION('',(2.22044604925E-16,0.,1.));+#2361 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#2362 = ADVANCED_FACE('',(#2363),#2381,.T.);+#2363 = FACE_BOUND('',#2364,.T.);+#2364 = EDGE_LOOP('',(#2365,#2373,#2379,#2380));+#2365 = ORIENTED_EDGE('',*,*,#2366,.F.);+#2366 = EDGE_CURVE('',#2367,#2250,#2369,.T.);+#2367 = VERTEX_POINT('',#2368);+#2368 = CARTESIAN_POINT('',(-5.725,-0.52,2.45));+#2369 = LINE('',#2370,#2371);+#2370 = CARTESIAN_POINT('',(-5.725,0.,2.45));+#2371 = VECTOR('',#2372,1.);+#2372 = DIRECTION('',(0.,1.,-0.));+#2373 = ORIENTED_EDGE('',*,*,#2374,.T.);+#2374 = EDGE_CURVE('',#2367,#2312,#2375,.T.);+#2375 = LINE('',#2376,#2377);+#2376 = CARTESIAN_POINT('',(-5.725,-0.52,0.));+#2377 = VECTOR('',#2378,1.);+#2378 = DIRECTION('',(0.,0.,1.));+#2379 = ORIENTED_EDGE('',*,*,#2311,.F.);+#2380 = ORIENTED_EDGE('',*,*,#2257,.F.);+#2381 = PLANE('',#2382);+#2382 = AXIS2_PLACEMENT_3D('',#2383,#2384,#2385);+#2383 = CARTESIAN_POINT('',(-5.725,-0.52,0.));+#2384 = DIRECTION('',(-1.,0.,0.));+#2385 = DIRECTION('',(0.,1.,0.));+#2386 = ADVANCED_FACE('',(#2387),#2430,.T.);+#2387 = FACE_BOUND('',#2388,.T.);+#2388 = EDGE_LOOP('',(#2389,#2390,#2391,#2399,#2407,#2415,#2423,#2429));+#2389 = ORIENTED_EDGE('',*,*,#2249,.F.);+#2390 = ORIENTED_EDGE('',*,*,#2296,.T.);+#2391 = ORIENTED_EDGE('',*,*,#2392,.F.);+#2392 = EDGE_CURVE('',#2393,#2289,#2395,.T.);+#2393 = VERTEX_POINT('',#2394);+#2394 = CARTESIAN_POINT('',(-4.425,0.4,2.45));+#2395 = LINE('',#2396,#2397);+#2396 = CARTESIAN_POINT('',(-4.425,0.4,2.45));+#2397 = VECTOR('',#2398,1.);+#2398 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#2399 = ORIENTED_EDGE('',*,*,#2400,.T.);+#2400 = EDGE_CURVE('',#2393,#2401,#2403,.T.);+#2401 = VERTEX_POINT('',#2402);+#2402 = CARTESIAN_POINT('',(-4.425,-0.4,2.45));+#2403 = LINE('',#2404,#2405);+#2404 = CARTESIAN_POINT('',(-4.425,0.4,2.45));+#2405 = VECTOR('',#2406,1.);+#2406 = DIRECTION('',(0.,-1.,0.));+#2407 = ORIENTED_EDGE('',*,*,#2408,.T.);+#2408 = EDGE_CURVE('',#2401,#2409,#2411,.T.);+#2409 = VERTEX_POINT('',#2410);+#2410 = CARTESIAN_POINT('',(-5.375,-0.4,2.45));+#2411 = LINE('',#2412,#2413);+#2412 = CARTESIAN_POINT('',(-4.425,-0.4,2.45));+#2413 = VECTOR('',#2414,1.);+#2414 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#2415 = ORIENTED_EDGE('',*,*,#2416,.T.);+#2416 = EDGE_CURVE('',#2409,#2417,#2419,.T.);+#2417 = VERTEX_POINT('',#2418);+#2418 = CARTESIAN_POINT('',(-5.375,-0.52,2.45));+#2419 = LINE('',#2420,#2421);+#2420 = CARTESIAN_POINT('',(-5.375,2.76,2.45));+#2421 = VECTOR('',#2422,1.);+#2422 = DIRECTION('',(0.,-1.,0.));+#2423 = ORIENTED_EDGE('',*,*,#2424,.T.);+#2424 = EDGE_CURVE('',#2417,#2367,#2425,.T.);+#2425 = LINE('',#2426,#2427);+#2426 = CARTESIAN_POINT('',(-4.425,-0.52,2.45));+#2427 = VECTOR('',#2428,1.);+#2428 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#2429 = ORIENTED_EDGE('',*,*,#2366,.T.);+#2430 = PLANE('',#2431);+#2431 = AXIS2_PLACEMENT_3D('',#2432,#2433,#2434);+#2432 = CARTESIAN_POINT('',(-4.425,0.52,2.45));+#2433 = DIRECTION('',(-2.22044604925E-16,-0.,-1.));+#2434 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#2435 = ADVANCED_FACE('',(#2436),#2447,.T.);+#2436 = FACE_BOUND('',#2437,.T.);+#2437 = EDGE_LOOP('',(#2438,#2439,#2440,#2446));+#2438 = ORIENTED_EDGE('',*,*,#2288,.F.);+#2439 = ORIENTED_EDGE('',*,*,#2351,.T.);+#2440 = ORIENTED_EDGE('',*,*,#2441,.T.);+#2441 = EDGE_CURVE('',#2344,#2393,#2442,.T.);+#2442 = LINE('',#2443,#2444);+#2443 = CARTESIAN_POINT('',(-4.425,0.4,2.95));+#2444 = VECTOR('',#2445,1.);+#2445 = DIRECTION('',(0.,0.,-1.));+#2446 = ORIENTED_EDGE('',*,*,#2392,.T.);+#2447 = PLANE('',#2448);+#2448 = AXIS2_PLACEMENT_3D('',#2449,#2450,#2451);+#2449 = CARTESIAN_POINT('',(-6.906718560679,0.4,1.483218261713));+#2450 = DIRECTION('',(0.,1.,0.));+#2451 = DIRECTION('',(0.,-0.,1.));+#2452 = ADVANCED_FACE('',(#2453),#2464,.T.);+#2453 = FACE_BOUND('',#2454,.T.);+#2454 = EDGE_LOOP('',(#2455,#2456,#2462,#2463));+#2455 = ORIENTED_EDGE('',*,*,#2343,.T.);+#2456 = ORIENTED_EDGE('',*,*,#2457,.T.);+#2457 = EDGE_CURVE('',#2336,#2401,#2458,.T.);+#2458 = LINE('',#2459,#2460);+#2459 = CARTESIAN_POINT('',(-4.425,-0.4,2.95));+#2460 = VECTOR('',#2461,1.);+#2461 = DIRECTION('',(0.,0.,-1.));+#2462 = ORIENTED_EDGE('',*,*,#2400,.F.);+#2463 = ORIENTED_EDGE('',*,*,#2441,.F.);+#2464 = PLANE('',#2465);+#2465 = AXIS2_PLACEMENT_3D('',#2466,#2467,#2468);+#2466 = CARTESIAN_POINT('',(-4.425,0.4,2.95));+#2467 = DIRECTION('',(1.,0.,0.));+#2468 = DIRECTION('',(0.,0.,-1.));+#2469 = ADVANCED_FACE('',(#2470),#2481,.F.);+#2470 = FACE_BOUND('',#2471,.F.);+#2471 = EDGE_LOOP('',(#2472,#2478,#2479,#2480));+#2472 = ORIENTED_EDGE('',*,*,#2473,.F.);+#2473 = EDGE_CURVE('',#2328,#2409,#2474,.T.);+#2474 = LINE('',#2475,#2476);+#2475 = CARTESIAN_POINT('',(-5.375,-0.4,0.741609130856));+#2476 = VECTOR('',#2477,1.);+#2477 = DIRECTION('',(-0.,0.,-1.));+#2478 = ORIENTED_EDGE('',*,*,#2335,.T.);+#2479 = ORIENTED_EDGE('',*,*,#2457,.T.);+#2480 = ORIENTED_EDGE('',*,*,#2408,.T.);+#2481 = PLANE('',#2482);+#2482 = AXIS2_PLACEMENT_3D('',#2483,#2484,#2485);+#2483 = CARTESIAN_POINT('',(-6.906718560679,-0.4,1.483218261713));+#2484 = DIRECTION('',(0.,1.,0.));+#2485 = DIRECTION('',(0.,-0.,1.));+#2486 = ADVANCED_FACE('',(#2487),#2498,.T.);+#2487 = FACE_BOUND('',#2488,.T.);+#2488 = EDGE_LOOP('',(#2489,#2490,#2491,#2497));+#2489 = ORIENTED_EDGE('',*,*,#2473,.F.);+#2490 = ORIENTED_EDGE('',*,*,#2327,.F.);+#2491 = ORIENTED_EDGE('',*,*,#2492,.T.);+#2492 = EDGE_CURVE('',#2320,#2417,#2493,.T.);+#2493 = LINE('',#2494,#2495);+#2494 = CARTESIAN_POINT('',(-5.375,-0.52,0.741609130856));+#2495 = VECTOR('',#2496,1.);+#2496 = DIRECTION('',(0.,-4.439358670796E-31,-1.));+#2497 = ORIENTED_EDGE('',*,*,#2416,.F.);+#2498 = PLANE('',#2499);+#2499 = AXIS2_PLACEMENT_3D('',#2500,#2501,#2502);+#2500 = CARTESIAN_POINT('',(-5.375,5.,0.));+#2501 = DIRECTION('',(1.,0.,-0.));+#2502 = DIRECTION('',(0.,-1.,0.));+#2503 = ADVANCED_FACE('',(#2504),#2510,.F.);+#2504 = FACE_BOUND('',#2505,.F.);+#2505 = EDGE_LOOP('',(#2506,#2507,#2508,#2509));+#2506 = ORIENTED_EDGE('',*,*,#2492,.T.);+#2507 = ORIENTED_EDGE('',*,*,#2424,.T.);+#2508 = ORIENTED_EDGE('',*,*,#2374,.T.);+#2509 = ORIENTED_EDGE('',*,*,#2319,.T.);+#2510 = PLANE('',#2511);+#2511 = AXIS2_PLACEMENT_3D('',#2512,#2513,#2514);+#2512 = CARTESIAN_POINT('',(-6.906718560679,-0.52,1.483218261713));+#2513 = DIRECTION('',(5.017907410264E-31,1.,-4.439358670796E-31));+#2514 = DIRECTION('',(1.,-5.017907410264E-31,0.));+#2515 = MANIFOLD_SOLID_BREP('',#2516);+#2516 = CLOSED_SHELL('',(#2517,#2557,#2652,#2676,#2764,#2781,#2798,#2883+,#2900,#2931,#2955,#2980,#3004,#3022,#3047,#3071,#3096,#3113,#3138,+#3155,#3172,#3189));+#2517 = ADVANCED_FACE('',(#2518),#2552,.T.);+#2518 = FACE_BOUND('',#2519,.T.);+#2519 = EDGE_LOOP('',(#2520,#2530,#2538,#2546));+#2520 = ORIENTED_EDGE('',*,*,#2521,.T.);+#2521 = EDGE_CURVE('',#2522,#2524,#2526,.T.);+#2522 = VERTEX_POINT('',#2523);+#2523 = CARTESIAN_POINT('',(-5.375,2.22,2.45));+#2524 = VERTEX_POINT('',#2525);+#2525 = CARTESIAN_POINT('',(-6.375,2.22,2.45));+#2526 = LINE('',#2527,#2528);+#2527 = CARTESIAN_POINT('',(-4.425,2.22,2.45));+#2528 = VECTOR('',#2529,1.);+#2529 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#2530 = ORIENTED_EDGE('',*,*,#2531,.T.);+#2531 = EDGE_CURVE('',#2524,#2532,#2534,.T.);+#2532 = VERTEX_POINT('',#2533);+#2533 = CARTESIAN_POINT('',(-6.375,2.22,2.95));+#2534 = LINE('',#2535,#2536);+#2535 = CARTESIAN_POINT('',(-6.375,2.22,0.741609130856));+#2536 = VECTOR('',#2537,1.);+#2537 = DIRECTION('',(0.,4.439358670796E-31,1.));+#2538 = ORIENTED_EDGE('',*,*,#2539,.T.);+#2539 = EDGE_CURVE('',#2532,#2540,#2542,.T.);+#2540 = VERTEX_POINT('',#2541);+#2541 = CARTESIAN_POINT('',(-5.375,2.22,2.95));+#2542 = LINE('',#2543,#2544);+#2543 = CARTESIAN_POINT('',(-6.425,2.22,2.95));+#2544 = VECTOR('',#2545,1.);+#2545 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#2546 = ORIENTED_EDGE('',*,*,#2547,.T.);+#2547 = EDGE_CURVE('',#2540,#2522,#2548,.T.);+#2548 = LINE('',#2549,#2550);+#2549 = CARTESIAN_POINT('',(-5.375,2.22,0.741609130856));+#2550 = VECTOR('',#2551,1.);+#2551 = DIRECTION('',(0.,-4.439358670796E-31,-1.));+#2552 = PLANE('',#2553);+#2553 = AXIS2_PLACEMENT_3D('',#2554,#2555,#2556);+#2554 = CARTESIAN_POINT('',(-6.906718560679,2.22,1.483218261713));+#2555 = DIRECTION('',(5.017907410264E-31,1.,-4.439358670796E-31));+#2556 = DIRECTION('',(1.,-5.017907410264E-31,0.));+#2557 = ADVANCED_FACE('',(#2558),#2647,.T.);+#2558 = FACE_BOUND('',#2559,.T.);+#2559 = EDGE_LOOP('',(#2560,#2561,#2569,#2577,#2585,#2593,#2601,#2609,+#2617,#2625,#2633,#2641));+#2560 = ORIENTED_EDGE('',*,*,#2521,.F.);+#2561 = ORIENTED_EDGE('',*,*,#2562,.T.);+#2562 = EDGE_CURVE('',#2522,#2563,#2565,.T.);+#2563 = VERTEX_POINT('',#2564);+#2564 = CARTESIAN_POINT('',(-5.375,2.1,2.45));+#2565 = LINE('',#2566,#2567);+#2566 = CARTESIAN_POINT('',(-5.375,3.61,2.45));+#2567 = VECTOR('',#2568,1.);+#2568 = DIRECTION('',(0.,-1.,0.));+#2569 = ORIENTED_EDGE('',*,*,#2570,.F.);+#2570 = EDGE_CURVE('',#2571,#2563,#2573,.T.);+#2571 = VERTEX_POINT('',#2572);+#2572 = CARTESIAN_POINT('',(-4.425,2.1,2.45));+#2573 = LINE('',#2574,#2575);+#2574 = CARTESIAN_POINT('',(-4.425,2.1,2.45));+#2575 = VECTOR('',#2576,1.);+#2576 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#2577 = ORIENTED_EDGE('',*,*,#2578,.T.);+#2578 = EDGE_CURVE('',#2571,#2579,#2581,.T.);+#2579 = VERTEX_POINT('',#2580);+#2580 = CARTESIAN_POINT('',(-4.425,1.3,2.45));+#2581 = LINE('',#2582,#2583);+#2582 = CARTESIAN_POINT('',(-4.425,2.1,2.45));+#2583 = VECTOR('',#2584,1.);+#2584 = DIRECTION('',(0.,-1.,0.));+#2585 = ORIENTED_EDGE('',*,*,#2586,.T.);+#2586 = EDGE_CURVE('',#2579,#2587,#2589,.T.);+#2587 = VERTEX_POINT('',#2588);+#2588 = CARTESIAN_POINT('',(-5.375,1.3,2.45));+#2589 = LINE('',#2590,#2591);+#2590 = CARTESIAN_POINT('',(-4.425,1.3,2.45));+#2591 = VECTOR('',#2592,1.);+#2592 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#2593 = ORIENTED_EDGE('',*,*,#2594,.T.);+#2594 = EDGE_CURVE('',#2587,#2595,#2597,.T.);+#2595 = VERTEX_POINT('',#2596);+#2596 = CARTESIAN_POINT('',(-5.375,1.18,2.45));+#2597 = LINE('',#2598,#2599);+#2598 = CARTESIAN_POINT('',(-5.375,3.61,2.45));+#2599 = VECTOR('',#2600,1.);+#2600 = DIRECTION('',(0.,-1.,0.));+#2601 = ORIENTED_EDGE('',*,*,#2602,.T.);+#2602 = EDGE_CURVE('',#2595,#2603,#2605,.T.);+#2603 = VERTEX_POINT('',#2604);+#2604 = CARTESIAN_POINT('',(-6.375,1.18,2.45));+#2605 = LINE('',#2606,#2607);+#2606 = CARTESIAN_POINT('',(-4.425,1.18,2.45));+#2607 = VECTOR('',#2608,1.);+#2608 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#2609 = ORIENTED_EDGE('',*,*,#2610,.T.);+#2610 = EDGE_CURVE('',#2603,#2611,#2613,.T.);+#2611 = VERTEX_POINT('',#2612);+#2612 = CARTESIAN_POINT('',(-6.375,1.3,2.45));+#2613 = LINE('',#2614,#2615);+#2614 = CARTESIAN_POINT('',(-6.375,-1.39,2.45));+#2615 = VECTOR('',#2616,1.);+#2616 = DIRECTION('',(0.,1.,-0.));+#2617 = ORIENTED_EDGE('',*,*,#2618,.T.);+#2618 = EDGE_CURVE('',#2611,#2619,#2621,.T.);+#2619 = VERTEX_POINT('',#2620);+#2620 = CARTESIAN_POINT('',(-6.425,1.3,2.45));+#2621 = LINE('',#2622,#2623);+#2622 = CARTESIAN_POINT('',(-4.425,1.3,2.45));+#2623 = VECTOR('',#2624,1.);+#2624 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#2625 = ORIENTED_EDGE('',*,*,#2626,.F.);+#2626 = EDGE_CURVE('',#2627,#2619,#2629,.T.);+#2627 = VERTEX_POINT('',#2628);+#2628 = CARTESIAN_POINT('',(-6.425,2.1,2.45));+#2629 = LINE('',#2630,#2631);+#2630 = CARTESIAN_POINT('',(-6.425,2.1,2.45));+#2631 = VECTOR('',#2632,1.);+#2632 = DIRECTION('',(0.,-1.,0.));+#2633 = ORIENTED_EDGE('',*,*,#2634,.F.);+#2634 = EDGE_CURVE('',#2635,#2627,#2637,.T.);+#2635 = VERTEX_POINT('',#2636);+#2636 = CARTESIAN_POINT('',(-6.375,2.1,2.45));+#2637 = LINE('',#2638,#2639);+#2638 = CARTESIAN_POINT('',(-4.425,2.1,2.45));+#2639 = VECTOR('',#2640,1.);+#2640 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#2641 = ORIENTED_EDGE('',*,*,#2642,.T.);+#2642 = EDGE_CURVE('',#2635,#2524,#2643,.T.);+#2643 = LINE('',#2644,#2645);+#2644 = CARTESIAN_POINT('',(-6.375,-1.39,2.45));+#2645 = VECTOR('',#2646,1.);+#2646 = DIRECTION('',(0.,1.,-0.));+#2647 = PLANE('',#2648);+#2648 = AXIS2_PLACEMENT_3D('',#2649,#2650,#2651);+#2649 = CARTESIAN_POINT('',(-4.425,2.22,2.45));+#2650 = DIRECTION('',(-2.22044604925E-16,-0.,-1.));+#2651 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#2652 = ADVANCED_FACE('',(#2653),#2671,.T.);+#2653 = FACE_BOUND('',#2654,.T.);+#2654 = EDGE_LOOP('',(#2655,#2656,#2664,#2670));+#2655 = ORIENTED_EDGE('',*,*,#2547,.F.);+#2656 = ORIENTED_EDGE('',*,*,#2657,.F.);+#2657 = EDGE_CURVE('',#2658,#2540,#2660,.T.);+#2658 = VERTEX_POINT('',#2659);+#2659 = CARTESIAN_POINT('',(-5.375,2.1,2.95));+#2660 = LINE('',#2661,#2662);+#2661 = CARTESIAN_POINT('',(-5.375,3.61,2.95));+#2662 = VECTOR('',#2663,1.);+#2663 = DIRECTION('',(-0.,1.,0.));+#2664 = ORIENTED_EDGE('',*,*,#2665,.T.);+#2665 = EDGE_CURVE('',#2658,#2563,#2666,.T.);+#2666 = LINE('',#2667,#2668);+#2667 = CARTESIAN_POINT('',(-5.375,2.1,0.741609130856));+#2668 = VECTOR('',#2669,1.);+#2669 = DIRECTION('',(-0.,0.,-1.));+#2670 = ORIENTED_EDGE('',*,*,#2562,.F.);+#2671 = PLANE('',#2672);+#2672 = AXIS2_PLACEMENT_3D('',#2673,#2674,#2675);+#2673 = CARTESIAN_POINT('',(-5.375,5.,0.));+#2674 = DIRECTION('',(1.,0.,-0.));+#2675 = DIRECTION('',(0.,-1.,0.));+#2676 = ADVANCED_FACE('',(#2677),#2759,.T.);+#2677 = FACE_BOUND('',#2678,.T.);+#2678 = EDGE_LOOP('',(#2679,#2680,#2688,#2696,#2704,#2712,#2720,#2728,+#2736,#2744,#2752,#2758));+#2679 = ORIENTED_EDGE('',*,*,#2539,.F.);+#2680 = ORIENTED_EDGE('',*,*,#2681,.T.);+#2681 = EDGE_CURVE('',#2532,#2682,#2684,.T.);+#2682 = VERTEX_POINT('',#2683);+#2683 = CARTESIAN_POINT('',(-6.375,2.1,2.95));+#2684 = LINE('',#2685,#2686);+#2685 = CARTESIAN_POINT('',(-6.375,-1.39,2.95));+#2686 = VECTOR('',#2687,1.);+#2687 = DIRECTION('',(0.,-1.,0.));+#2688 = ORIENTED_EDGE('',*,*,#2689,.F.);+#2689 = EDGE_CURVE('',#2690,#2682,#2692,.T.);+#2690 = VERTEX_POINT('',#2691);+#2691 = CARTESIAN_POINT('',(-6.425,2.1,2.95));+#2692 = LINE('',#2693,#2694);+#2693 = CARTESIAN_POINT('',(-6.425,2.1,2.95));+#2694 = VECTOR('',#2695,1.);+#2695 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#2696 = ORIENTED_EDGE('',*,*,#2697,.T.);+#2697 = EDGE_CURVE('',#2690,#2698,#2700,.T.);+#2698 = VERTEX_POINT('',#2699);+#2699 = CARTESIAN_POINT('',(-6.425,1.3,2.95));+#2700 = LINE('',#2701,#2702);+#2701 = CARTESIAN_POINT('',(-6.425,2.1,2.95));+#2702 = VECTOR('',#2703,1.);+#2703 = DIRECTION('',(0.,-1.,0.));+#2704 = ORIENTED_EDGE('',*,*,#2705,.T.);+#2705 = EDGE_CURVE('',#2698,#2706,#2708,.T.);+#2706 = VERTEX_POINT('',#2707);+#2707 = CARTESIAN_POINT('',(-6.375,1.3,2.95));+#2708 = LINE('',#2709,#2710);+#2709 = CARTESIAN_POINT('',(-6.425,1.3,2.95));+#2710 = VECTOR('',#2711,1.);+#2711 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#2712 = ORIENTED_EDGE('',*,*,#2713,.T.);+#2713 = EDGE_CURVE('',#2706,#2714,#2716,.T.);+#2714 = VERTEX_POINT('',#2715);+#2715 = CARTESIAN_POINT('',(-6.375,1.18,2.95));+#2716 = LINE('',#2717,#2718);+#2717 = CARTESIAN_POINT('',(-6.375,-1.39,2.95));+#2718 = VECTOR('',#2719,1.);+#2719 = DIRECTION('',(0.,-1.,0.));+#2720 = ORIENTED_EDGE('',*,*,#2721,.T.);+#2721 = EDGE_CURVE('',#2714,#2722,#2724,.T.);+#2722 = VERTEX_POINT('',#2723);+#2723 = CARTESIAN_POINT('',(-5.375,1.18,2.95));+#2724 = LINE('',#2725,#2726);+#2725 = CARTESIAN_POINT('',(-6.425,1.18,2.95));+#2726 = VECTOR('',#2727,1.);+#2727 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#2728 = ORIENTED_EDGE('',*,*,#2729,.T.);+#2729 = EDGE_CURVE('',#2722,#2730,#2732,.T.);+#2730 = VERTEX_POINT('',#2731);+#2731 = CARTESIAN_POINT('',(-5.375,1.3,2.95));+#2732 = LINE('',#2733,#2734);+#2733 = CARTESIAN_POINT('',(-5.375,3.61,2.95));+#2734 = VECTOR('',#2735,1.);+#2735 = DIRECTION('',(-0.,1.,0.));+#2736 = ORIENTED_EDGE('',*,*,#2737,.T.);+#2737 = EDGE_CURVE('',#2730,#2738,#2740,.T.);+#2738 = VERTEX_POINT('',#2739);+#2739 = CARTESIAN_POINT('',(-4.425,1.3,2.95));+#2740 = LINE('',#2741,#2742);+#2741 = CARTESIAN_POINT('',(-6.425,1.3,2.95));+#2742 = VECTOR('',#2743,1.);+#2743 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#2744 = ORIENTED_EDGE('',*,*,#2745,.F.);+#2745 = EDGE_CURVE('',#2746,#2738,#2748,.T.);+#2746 = VERTEX_POINT('',#2747);+#2747 = CARTESIAN_POINT('',(-4.425,2.1,2.95));+#2748 = LINE('',#2749,#2750);+#2749 = CARTESIAN_POINT('',(-4.425,2.1,2.95));+#2750 = VECTOR('',#2751,1.);+#2751 = DIRECTION('',(0.,-1.,0.));+#2752 = ORIENTED_EDGE('',*,*,#2753,.F.);+#2753 = EDGE_CURVE('',#2658,#2746,#2754,.T.);+#2754 = LINE('',#2755,#2756);+#2755 = CARTESIAN_POINT('',(-6.425,2.1,2.95));+#2756 = VECTOR('',#2757,1.);+#2757 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#2758 = ORIENTED_EDGE('',*,*,#2657,.T.);+#2759 = PLANE('',#2760);+#2760 = AXIS2_PLACEMENT_3D('',#2761,#2762,#2763);+#2761 = CARTESIAN_POINT('',(-6.425,2.22,2.95));+#2762 = DIRECTION('',(2.22044604925E-16,0.,1.));+#2763 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#2764 = ADVANCED_FACE('',(#2765),#2776,.T.);+#2765 = FACE_BOUND('',#2766,.T.);+#2766 = EDGE_LOOP('',(#2767,#2768,#2769,#2770));+#2767 = ORIENTED_EDGE('',*,*,#2681,.F.);+#2768 = ORIENTED_EDGE('',*,*,#2531,.F.);+#2769 = ORIENTED_EDGE('',*,*,#2642,.F.);+#2770 = ORIENTED_EDGE('',*,*,#2771,.T.);+#2771 = EDGE_CURVE('',#2635,#2682,#2772,.T.);+#2772 = LINE('',#2773,#2774);+#2773 = CARTESIAN_POINT('',(-6.375,2.1,0.741609130856));+#2774 = VECTOR('',#2775,1.);+#2775 = DIRECTION('',(0.,-0.,1.));+#2776 = PLANE('',#2777);+#2777 = AXIS2_PLACEMENT_3D('',#2778,#2779,#2780);+#2778 = CARTESIAN_POINT('',(-6.375,-5.,0.));+#2779 = DIRECTION('',(-1.,0.,0.));+#2780 = DIRECTION('',(0.,1.,0.));+#2781 = ADVANCED_FACE('',(#2782),#2793,.T.);+#2782 = FACE_BOUND('',#2783,.T.);+#2783 = EDGE_LOOP('',(#2784,#2785,#2786,#2792));+#2784 = ORIENTED_EDGE('',*,*,#2665,.F.);+#2785 = ORIENTED_EDGE('',*,*,#2753,.T.);+#2786 = ORIENTED_EDGE('',*,*,#2787,.T.);+#2787 = EDGE_CURVE('',#2746,#2571,#2788,.T.);+#2788 = LINE('',#2789,#2790);+#2789 = CARTESIAN_POINT('',(-4.425,2.1,2.95));+#2790 = VECTOR('',#2791,1.);+#2791 = DIRECTION('',(0.,0.,-1.));+#2792 = ORIENTED_EDGE('',*,*,#2570,.T.);+#2793 = PLANE('',#2794);+#2794 = AXIS2_PLACEMENT_3D('',#2795,#2796,#2797);+#2795 = CARTESIAN_POINT('',(-6.906718560679,2.1,1.483218261713));+#2796 = DIRECTION('',(0.,1.,0.));+#2797 = DIRECTION('',(0.,-0.,1.));+#2798 = ADVANCED_FACE('',(#2799),#2878,.T.);+#2799 = FACE_BOUND('',#2800,.T.);+#2800 = EDGE_LOOP('',(#2801,#2811,#2819,#2828,#2836,#2843,#2844,#2845,+#2846,#2855,#2863,#2872));+#2801 = ORIENTED_EDGE('',*,*,#2802,.T.);+#2802 = EDGE_CURVE('',#2803,#2805,#2807,.T.);+#2803 = VERTEX_POINT('',#2804);+#2804 = CARTESIAN_POINT('',(-9.375,2.1,1.015962243071E-15));+#2805 = VERTEX_POINT('',#2806);+#2806 = CARTESIAN_POINT('',(-9.375,2.1,0.5));+#2807 = LINE('',#2808,#2809);+#2808 = CARTESIAN_POINT('',(-9.375,2.1,1.015962243071E-15));+#2809 = VECTOR('',#2810,1.);+#2810 = DIRECTION('',(0.,0.,1.));+#2811 = ORIENTED_EDGE('',*,*,#2812,.T.);+#2812 = EDGE_CURVE('',#2805,#2813,#2815,.T.);+#2813 = VERTEX_POINT('',#2814);+#2814 = CARTESIAN_POINT('',(-7.425,2.1,0.5));+#2815 = LINE('',#2816,#2817);+#2816 = CARTESIAN_POINT('',(-9.375,2.1,0.5));+#2817 = VECTOR('',#2818,1.);+#2818 = DIRECTION('',(1.,0.,0.));+#2819 = ORIENTED_EDGE('',*,*,#2820,.T.);+#2820 = EDGE_CURVE('',#2813,#2821,#2823,.T.);+#2821 = VERTEX_POINT('',#2822);+#2822 = CARTESIAN_POINT('',(-7.175,2.1,0.75));+#2823 = CIRCLE('',#2824,0.25);+#2824 = AXIS2_PLACEMENT_3D('',#2825,#2826,#2827);+#2825 = CARTESIAN_POINT('',(-7.425,2.1,0.75));+#2826 = DIRECTION('',(0.,-1.,0.));+#2827 = DIRECTION('',(3.5527136788E-15,0.,-1.));+#2828 = ORIENTED_EDGE('',*,*,#2829,.T.);+#2829 = EDGE_CURVE('',#2821,#2830,#2832,.T.);+#2830 = VERTEX_POINT('',#2831);+#2831 = CARTESIAN_POINT('',(-7.175,2.1,2.2));+#2832 = LINE('',#2833,#2834);+#2833 = CARTESIAN_POINT('',(-7.175,2.1,0.75));+#2834 = VECTOR('',#2835,1.);+#2835 = DIRECTION('',(0.,0.,1.));+#2836 = ORIENTED_EDGE('',*,*,#2837,.T.);+#2837 = EDGE_CURVE('',#2830,#2690,#2838,.T.);+#2838 = CIRCLE('',#2839,0.75);+#2839 = AXIS2_PLACEMENT_3D('',#2840,#2841,#2842);+#2840 = CARTESIAN_POINT('',(-6.425,2.1,2.2));+#2841 = DIRECTION('',(0.,1.,0.));+#2842 = DIRECTION('',(-1.,0.,5.921189464667E-16));+#2843 = ORIENTED_EDGE('',*,*,#2689,.T.);+#2844 = ORIENTED_EDGE('',*,*,#2771,.F.);+#2845 = ORIENTED_EDGE('',*,*,#2634,.T.);+#2846 = ORIENTED_EDGE('',*,*,#2847,.T.);+#2847 = EDGE_CURVE('',#2627,#2848,#2850,.T.);+#2848 = VERTEX_POINT('',#2849);+#2849 = CARTESIAN_POINT('',(-6.675,2.1,2.2));+#2850 = CIRCLE('',#2851,0.25);+#2851 = AXIS2_PLACEMENT_3D('',#2852,#2853,#2854);+#2852 = CARTESIAN_POINT('',(-6.425,2.1,2.2));+#2853 = DIRECTION('',(0.,-1.,0.));+#2854 = DIRECTION('',(-3.5527136788E-15,0.,1.));+#2855 = ORIENTED_EDGE('',*,*,#2856,.T.);+#2856 = EDGE_CURVE('',#2848,#2857,#2859,.T.);+#2857 = VERTEX_POINT('',#2858);+#2858 = CARTESIAN_POINT('',(-6.675,2.1,0.75));+#2859 = LINE('',#2860,#2861);+#2860 = CARTESIAN_POINT('',(-6.675,2.1,2.2));+#2861 = VECTOR('',#2862,1.);+#2862 = DIRECTION('',(0.,0.,-1.));+#2863 = ORIENTED_EDGE('',*,*,#2864,.T.);+#2864 = EDGE_CURVE('',#2857,#2865,#2867,.T.);+#2865 = VERTEX_POINT('',#2866);+#2866 = CARTESIAN_POINT('',(-7.425,2.1,5.551115123126E-16));+#2867 = CIRCLE('',#2868,0.75);+#2868 = AXIS2_PLACEMENT_3D('',#2869,#2870,#2871);+#2869 = CARTESIAN_POINT('',(-7.425,2.1,0.75));+#2870 = DIRECTION('',(0.,1.,0.));+#2871 = DIRECTION('',(1.,0.,-8.881784197001E-16));+#2872 = ORIENTED_EDGE('',*,*,#2873,.T.);+#2873 = EDGE_CURVE('',#2865,#2803,#2874,.T.);+#2874 = LINE('',#2875,#2876);+#2875 = CARTESIAN_POINT('',(-7.425,2.1,5.551115123126E-16));+#2876 = VECTOR('',#2877,1.);+#2877 = DIRECTION('',(-1.,0.,2.363337080814E-16));+#2878 = PLANE('',#2879);+#2879 = AXIS2_PLACEMENT_3D('',#2880,#2881,#2882);+#2880 = CARTESIAN_POINT('',(-6.906718560679,2.1,1.483218261713));+#2881 = DIRECTION('',(0.,1.,0.));+#2882 = DIRECTION('',(0.,-0.,1.));+#2883 = ADVANCED_FACE('',(#2884),#2895,.T.);+#2884 = FACE_BOUND('',#2885,.T.);+#2885 = EDGE_LOOP('',(#2886,#2887,#2893,#2894));+#2886 = ORIENTED_EDGE('',*,*,#2745,.T.);+#2887 = ORIENTED_EDGE('',*,*,#2888,.T.);+#2888 = EDGE_CURVE('',#2738,#2579,#2889,.T.);+#2889 = LINE('',#2890,#2891);+#2890 = CARTESIAN_POINT('',(-4.425,1.3,2.95));+#2891 = VECTOR('',#2892,1.);+#2892 = DIRECTION('',(0.,0.,-1.));+#2893 = ORIENTED_EDGE('',*,*,#2578,.F.);+#2894 = ORIENTED_EDGE('',*,*,#2787,.F.);+#2895 = PLANE('',#2896);+#2896 = AXIS2_PLACEMENT_3D('',#2897,#2898,#2899);+#2897 = CARTESIAN_POINT('',(-4.425,2.1,2.95));+#2898 = DIRECTION('',(1.,0.,0.));+#2899 = DIRECTION('',(0.,0.,-1.));+#2900 = ADVANCED_FACE('',(#2901),#2926,.T.);+#2901 = FACE_BOUND('',#2902,.T.);+#2902 = EDGE_LOOP('',(#2903,#2911,#2919,#2925));+#2903 = ORIENTED_EDGE('',*,*,#2904,.T.);+#2904 = EDGE_CURVE('',#2803,#2905,#2907,.T.);+#2905 = VERTEX_POINT('',#2906);+#2906 = CARTESIAN_POINT('',(-9.375,1.3,1.015962243071E-15));+#2907 = LINE('',#2908,#2909);+#2908 = CARTESIAN_POINT('',(-9.375,2.1,1.015962243071E-15));+#2909 = VECTOR('',#2910,1.);+#2910 = DIRECTION('',(0.,-1.,0.));+#2911 = ORIENTED_EDGE('',*,*,#2912,.T.);+#2912 = EDGE_CURVE('',#2905,#2913,#2915,.T.);+#2913 = VERTEX_POINT('',#2914);+#2914 = CARTESIAN_POINT('',(-9.375,1.3,0.5));+#2915 = LINE('',#2916,#2917);+#2916 = CARTESIAN_POINT('',(-9.375,1.3,1.015962243071E-15));+#2917 = VECTOR('',#2918,1.);+#2918 = DIRECTION('',(0.,0.,1.));+#2919 = ORIENTED_EDGE('',*,*,#2920,.F.);+#2920 = EDGE_CURVE('',#2805,#2913,#2921,.T.);+#2921 = LINE('',#2922,#2923);+#2922 = CARTESIAN_POINT('',(-9.375,2.1,0.5));+#2923 = VECTOR('',#2924,1.);+#2924 = DIRECTION('',(0.,-1.,0.));+#2925 = ORIENTED_EDGE('',*,*,#2802,.F.);+#2926 = PLANE('',#2927);+#2927 = AXIS2_PLACEMENT_3D('',#2928,#2929,#2930);+#2928 = CARTESIAN_POINT('',(-9.375,2.1,1.015962243071E-15));+#2929 = DIRECTION('',(-1.,0.,0.));+#2930 = DIRECTION('',(0.,0.,1.));+#2931 = ADVANCED_FACE('',(#2932),#2950,.T.);+#2932 = FACE_BOUND('',#2933,.T.);+#2933 = EDGE_LOOP('',(#2934,#2942,#2948,#2949));+#2934 = ORIENTED_EDGE('',*,*,#2935,.T.);+#2935 = EDGE_CURVE('',#2865,#2936,#2938,.T.);+#2936 = VERTEX_POINT('',#2937);+#2937 = CARTESIAN_POINT('',(-7.425,1.3,5.551115123126E-16));+#2938 = LINE('',#2939,#2940);+#2939 = CARTESIAN_POINT('',(-7.425,2.1,5.551115123126E-16));+#2940 = VECTOR('',#2941,1.);+#2941 = DIRECTION('',(0.,-1.,0.));+#2942 = ORIENTED_EDGE('',*,*,#2943,.T.);+#2943 = EDGE_CURVE('',#2936,#2905,#2944,.T.);+#2944 = LINE('',#2945,#2946);+#2945 = CARTESIAN_POINT('',(-7.425,1.3,5.551115123126E-16));+#2946 = VECTOR('',#2947,1.);+#2947 = DIRECTION('',(-1.,0.,2.363337080814E-16));+#2948 = ORIENTED_EDGE('',*,*,#2904,.F.);+#2949 = ORIENTED_EDGE('',*,*,#2873,.F.);+#2950 = PLANE('',#2951);+#2951 = AXIS2_PLACEMENT_3D('',#2952,#2953,#2954);+#2952 = CARTESIAN_POINT('',(-7.425,2.1,5.551115123126E-16));+#2953 = DIRECTION('',(-2.363337080814E-16,-0.,-1.));+#2954 = DIRECTION('',(-1.,0.,2.363337080814E-16));+#2955 = ADVANCED_FACE('',(#2956),#2975,.T.);+#2956 = FACE_BOUND('',#2957,.T.);+#2957 = EDGE_LOOP('',(#2958,#2966,#2973,#2974));+#2958 = ORIENTED_EDGE('',*,*,#2959,.T.);+#2959 = EDGE_CURVE('',#2857,#2960,#2962,.T.);+#2960 = VERTEX_POINT('',#2961);+#2961 = CARTESIAN_POINT('',(-6.675,1.3,0.75));+#2962 = LINE('',#2963,#2964);+#2963 = CARTESIAN_POINT('',(-6.675,2.1,0.75));+#2964 = VECTOR('',#2965,1.);+#2965 = DIRECTION('',(0.,-1.,0.));+#2966 = ORIENTED_EDGE('',*,*,#2967,.T.);+#2967 = EDGE_CURVE('',#2960,#2936,#2968,.T.);+#2968 = CIRCLE('',#2969,0.75);+#2969 = AXIS2_PLACEMENT_3D('',#2970,#2971,#2972);+#2970 = CARTESIAN_POINT('',(-7.425,1.3,0.75));+#2971 = DIRECTION('',(0.,1.,0.));+#2972 = DIRECTION('',(1.,0.,-8.881784197001E-16));+#2973 = ORIENTED_EDGE('',*,*,#2935,.F.);+#2974 = ORIENTED_EDGE('',*,*,#2864,.F.);+#2975 = CYLINDRICAL_SURFACE('',#2976,0.75);+#2976 = AXIS2_PLACEMENT_3D('',#2977,#2978,#2979);+#2977 = CARTESIAN_POINT('',(-7.425,2.1,0.75));+#2978 = DIRECTION('',(0.,1.,0.));+#2979 = DIRECTION('',(1.,0.,-8.881784197001E-16));+#2980 = ADVANCED_FACE('',(#2981),#2999,.T.);+#2981 = FACE_BOUND('',#2982,.T.);+#2982 = EDGE_LOOP('',(#2983,#2991,#2997,#2998));+#2983 = ORIENTED_EDGE('',*,*,#2984,.T.);+#2984 = EDGE_CURVE('',#2848,#2985,#2987,.T.);+#2985 = VERTEX_POINT('',#2986);+#2986 = CARTESIAN_POINT('',(-6.675,1.3,2.2));+#2987 = LINE('',#2988,#2989);+#2988 = CARTESIAN_POINT('',(-6.675,2.1,2.2));+#2989 = VECTOR('',#2990,1.);+#2990 = DIRECTION('',(0.,-1.,0.));+#2991 = ORIENTED_EDGE('',*,*,#2992,.T.);+#2992 = EDGE_CURVE('',#2985,#2960,#2993,.T.);+#2993 = LINE('',#2994,#2995);+#2994 = CARTESIAN_POINT('',(-6.675,1.3,2.2));+#2995 = VECTOR('',#2996,1.);+#2996 = DIRECTION('',(0.,0.,-1.));+#2997 = ORIENTED_EDGE('',*,*,#2959,.F.);+#2998 = ORIENTED_EDGE('',*,*,#2856,.F.);+#2999 = PLANE('',#3000);+#3000 = AXIS2_PLACEMENT_3D('',#3001,#3002,#3003);+#3001 = CARTESIAN_POINT('',(-6.675,2.1,2.2));+#3002 = DIRECTION('',(1.,0.,0.));+#3003 = DIRECTION('',(0.,0.,-1.));+#3004 = ADVANCED_FACE('',(#3005),#3017,.F.);+#3005 = FACE_BOUND('',#3006,.T.);+#3006 = EDGE_LOOP('',(#3007,#3008,#3015,#3016));+#3007 = ORIENTED_EDGE('',*,*,#2626,.T.);+#3008 = ORIENTED_EDGE('',*,*,#3009,.T.);+#3009 = EDGE_CURVE('',#2619,#2985,#3010,.T.);+#3010 = CIRCLE('',#3011,0.25);+#3011 = AXIS2_PLACEMENT_3D('',#3012,#3013,#3014);+#3012 = CARTESIAN_POINT('',(-6.425,1.3,2.2));+#3013 = DIRECTION('',(0.,-1.,0.));+#3014 = DIRECTION('',(-3.5527136788E-15,0.,1.));+#3015 = ORIENTED_EDGE('',*,*,#2984,.F.);+#3016 = ORIENTED_EDGE('',*,*,#2847,.F.);+#3017 = CYLINDRICAL_SURFACE('',#3018,0.25);+#3018 = AXIS2_PLACEMENT_3D('',#3019,#3020,#3021);+#3019 = CARTESIAN_POINT('',(-6.425,2.1,2.2));+#3020 = DIRECTION('',(-0.,1.,-0.));+#3021 = DIRECTION('',(-3.5527136788E-15,0.,1.));+#3022 = ADVANCED_FACE('',(#3023),#3042,.T.);+#3023 = FACE_BOUND('',#3024,.T.);+#3024 = EDGE_LOOP('',(#3025,#3033,#3040,#3041));+#3025 = ORIENTED_EDGE('',*,*,#3026,.T.);+#3026 = EDGE_CURVE('',#2830,#3027,#3029,.T.);+#3027 = VERTEX_POINT('',#3028);+#3028 = CARTESIAN_POINT('',(-7.175,1.3,2.2));+#3029 = LINE('',#3030,#3031);+#3030 = CARTESIAN_POINT('',(-7.175,2.1,2.2));+#3031 = VECTOR('',#3032,1.);+#3032 = DIRECTION('',(0.,-1.,0.));+#3033 = ORIENTED_EDGE('',*,*,#3034,.T.);+#3034 = EDGE_CURVE('',#3027,#2698,#3035,.T.);+#3035 = CIRCLE('',#3036,0.75);+#3036 = AXIS2_PLACEMENT_3D('',#3037,#3038,#3039);+#3037 = CARTESIAN_POINT('',(-6.425,1.3,2.2));+#3038 = DIRECTION('',(0.,1.,0.));+#3039 = DIRECTION('',(-1.,0.,5.921189464667E-16));+#3040 = ORIENTED_EDGE('',*,*,#2697,.F.);+#3041 = ORIENTED_EDGE('',*,*,#2837,.F.);+#3042 = CYLINDRICAL_SURFACE('',#3043,0.75);+#3043 = AXIS2_PLACEMENT_3D('',#3044,#3045,#3046);+#3044 = CARTESIAN_POINT('',(-6.425,2.1,2.2));+#3045 = DIRECTION('',(0.,1.,0.));+#3046 = DIRECTION('',(-1.,0.,5.921189464667E-16));+#3047 = ADVANCED_FACE('',(#3048),#3066,.T.);+#3048 = FACE_BOUND('',#3049,.T.);+#3049 = EDGE_LOOP('',(#3050,#3058,#3064,#3065));+#3050 = ORIENTED_EDGE('',*,*,#3051,.T.);+#3051 = EDGE_CURVE('',#2821,#3052,#3054,.T.);+#3052 = VERTEX_POINT('',#3053);+#3053 = CARTESIAN_POINT('',(-7.175,1.3,0.75));+#3054 = LINE('',#3055,#3056);+#3055 = CARTESIAN_POINT('',(-7.175,2.1,0.75));+#3056 = VECTOR('',#3057,1.);+#3057 = DIRECTION('',(0.,-1.,0.));+#3058 = ORIENTED_EDGE('',*,*,#3059,.T.);+#3059 = EDGE_CURVE('',#3052,#3027,#3060,.T.);+#3060 = LINE('',#3061,#3062);+#3061 = CARTESIAN_POINT('',(-7.175,1.3,0.75));+#3062 = VECTOR('',#3063,1.);+#3063 = DIRECTION('',(0.,0.,1.));+#3064 = ORIENTED_EDGE('',*,*,#3026,.F.);+#3065 = ORIENTED_EDGE('',*,*,#2829,.F.);+#3066 = PLANE('',#3067);+#3067 = AXIS2_PLACEMENT_3D('',#3068,#3069,#3070);+#3068 = CARTESIAN_POINT('',(-7.175,2.1,0.75));+#3069 = DIRECTION('',(-1.,0.,0.));+#3070 = DIRECTION('',(0.,0.,1.));+#3071 = ADVANCED_FACE('',(#3072),#3091,.F.);+#3072 = FACE_BOUND('',#3073,.T.);+#3073 = EDGE_LOOP('',(#3074,#3082,#3089,#3090));+#3074 = ORIENTED_EDGE('',*,*,#3075,.T.);+#3075 = EDGE_CURVE('',#2813,#3076,#3078,.T.);+#3076 = VERTEX_POINT('',#3077);+#3077 = CARTESIAN_POINT('',(-7.425,1.3,0.5));+#3078 = LINE('',#3079,#3080);+#3079 = CARTESIAN_POINT('',(-7.425,2.1,0.5));+#3080 = VECTOR('',#3081,1.);+#3081 = DIRECTION('',(0.,-1.,0.));+#3082 = ORIENTED_EDGE('',*,*,#3083,.T.);+#3083 = EDGE_CURVE('',#3076,#3052,#3084,.T.);+#3084 = CIRCLE('',#3085,0.25);+#3085 = AXIS2_PLACEMENT_3D('',#3086,#3087,#3088);+#3086 = CARTESIAN_POINT('',(-7.425,1.3,0.75));+#3087 = DIRECTION('',(0.,-1.,0.));+#3088 = DIRECTION('',(3.5527136788E-15,0.,-1.));+#3089 = ORIENTED_EDGE('',*,*,#3051,.F.);+#3090 = ORIENTED_EDGE('',*,*,#2820,.F.);+#3091 = CYLINDRICAL_SURFACE('',#3092,0.25);+#3092 = AXIS2_PLACEMENT_3D('',#3093,#3094,#3095);+#3093 = CARTESIAN_POINT('',(-7.425,2.1,0.75));+#3094 = DIRECTION('',(-0.,1.,-0.));+#3095 = DIRECTION('',(3.5527136788E-15,0.,-1.));+#3096 = ADVANCED_FACE('',(#3097),#3108,.T.);+#3097 = FACE_BOUND('',#3098,.T.);+#3098 = EDGE_LOOP('',(#3099,#3100,#3106,#3107));+#3099 = ORIENTED_EDGE('',*,*,#2920,.T.);+#3100 = ORIENTED_EDGE('',*,*,#3101,.T.);+#3101 = EDGE_CURVE('',#2913,#3076,#3102,.T.);+#3102 = LINE('',#3103,#3104);+#3103 = CARTESIAN_POINT('',(-9.375,1.3,0.5));+#3104 = VECTOR('',#3105,1.);+#3105 = DIRECTION('',(1.,0.,0.));+#3106 = ORIENTED_EDGE('',*,*,#3075,.F.);+#3107 = ORIENTED_EDGE('',*,*,#2812,.F.);+#3108 = PLANE('',#3109);+#3109 = AXIS2_PLACEMENT_3D('',#3110,#3111,#3112);+#3110 = CARTESIAN_POINT('',(-9.375,2.1,0.5));+#3111 = DIRECTION('',(-0.,0.,1.));+#3112 = DIRECTION('',(1.,0.,0.));+#3113 = ADVANCED_FACE('',(#3114),#3133,.F.);+#3114 = FACE_BOUND('',#3115,.F.);+#3115 = EDGE_LOOP('',(#3116,#3117,#3118,#3119,#3120,#3121,#3122,#3128,+#3129,#3130,#3131,#3132));+#3116 = ORIENTED_EDGE('',*,*,#2912,.T.);+#3117 = ORIENTED_EDGE('',*,*,#3101,.T.);+#3118 = ORIENTED_EDGE('',*,*,#3083,.T.);+#3119 = ORIENTED_EDGE('',*,*,#3059,.T.);+#3120 = ORIENTED_EDGE('',*,*,#3034,.T.);+#3121 = ORIENTED_EDGE('',*,*,#2705,.T.);+#3122 = ORIENTED_EDGE('',*,*,#3123,.F.);+#3123 = EDGE_CURVE('',#2611,#2706,#3124,.T.);+#3124 = LINE('',#3125,#3126);+#3125 = CARTESIAN_POINT('',(-6.375,1.3,0.741609130856));+#3126 = VECTOR('',#3127,1.);+#3127 = DIRECTION('',(0.,-0.,1.));+#3128 = ORIENTED_EDGE('',*,*,#2618,.T.);+#3129 = ORIENTED_EDGE('',*,*,#3009,.T.);+#3130 = ORIENTED_EDGE('',*,*,#2992,.T.);+#3131 = ORIENTED_EDGE('',*,*,#2967,.T.);+#3132 = ORIENTED_EDGE('',*,*,#2943,.T.);+#3133 = PLANE('',#3134);+#3134 = AXIS2_PLACEMENT_3D('',#3135,#3136,#3137);+#3135 = CARTESIAN_POINT('',(-6.906718560679,1.3,1.483218261713));+#3136 = DIRECTION('',(0.,1.,0.));+#3137 = DIRECTION('',(0.,-0.,1.));+#3138 = ADVANCED_FACE('',(#3139),#3150,.T.);+#3139 = FACE_BOUND('',#3140,.T.);+#3140 = EDGE_LOOP('',(#3141,#3142,#3143,#3144));+#3141 = ORIENTED_EDGE('',*,*,#2713,.F.);+#3142 = ORIENTED_EDGE('',*,*,#3123,.F.);+#3143 = ORIENTED_EDGE('',*,*,#2610,.F.);+#3144 = ORIENTED_EDGE('',*,*,#3145,.T.);+#3145 = EDGE_CURVE('',#2603,#2714,#3146,.T.);+#3146 = LINE('',#3147,#3148);+#3147 = CARTESIAN_POINT('',(-6.375,1.18,0.741609130856));+#3148 = VECTOR('',#3149,1.);+#3149 = DIRECTION('',(0.,4.439358670796E-31,1.));+#3150 = PLANE('',#3151);+#3151 = AXIS2_PLACEMENT_3D('',#3152,#3153,#3154);+#3152 = CARTESIAN_POINT('',(-6.375,-5.,0.));+#3153 = DIRECTION('',(-1.,0.,0.));+#3154 = DIRECTION('',(0.,1.,0.));+#3155 = ADVANCED_FACE('',(#3156),#3167,.F.);+#3156 = FACE_BOUND('',#3157,.F.);+#3157 = EDGE_LOOP('',(#3158,#3159,#3160,#3161));+#3158 = ORIENTED_EDGE('',*,*,#2602,.T.);+#3159 = ORIENTED_EDGE('',*,*,#3145,.T.);+#3160 = ORIENTED_EDGE('',*,*,#2721,.T.);+#3161 = ORIENTED_EDGE('',*,*,#3162,.T.);+#3162 = EDGE_CURVE('',#2722,#2595,#3163,.T.);+#3163 = LINE('',#3164,#3165);+#3164 = CARTESIAN_POINT('',(-5.375,1.18,0.741609130856));+#3165 = VECTOR('',#3166,1.);+#3166 = DIRECTION('',(0.,-4.439358670796E-31,-1.));+#3167 = PLANE('',#3168);+#3168 = AXIS2_PLACEMENT_3D('',#3169,#3170,#3171);+#3169 = CARTESIAN_POINT('',(-6.906718560679,1.18,1.483218261713));+#3170 = DIRECTION('',(5.017907410264E-31,1.,-4.439358670796E-31));+#3171 = DIRECTION('',(1.,-5.017907410264E-31,0.));+#3172 = ADVANCED_FACE('',(#3173),#3184,.T.);+#3173 = FACE_BOUND('',#3174,.T.);+#3174 = EDGE_LOOP('',(#3175,#3181,#3182,#3183));+#3175 = ORIENTED_EDGE('',*,*,#3176,.F.);+#3176 = EDGE_CURVE('',#2730,#2587,#3177,.T.);+#3177 = LINE('',#3178,#3179);+#3178 = CARTESIAN_POINT('',(-5.375,1.3,0.741609130856));+#3179 = VECTOR('',#3180,1.);+#3180 = DIRECTION('',(-0.,0.,-1.));+#3181 = ORIENTED_EDGE('',*,*,#2729,.F.);+#3182 = ORIENTED_EDGE('',*,*,#3162,.T.);+#3183 = ORIENTED_EDGE('',*,*,#2594,.F.);+#3184 = PLANE('',#3185);+#3185 = AXIS2_PLACEMENT_3D('',#3186,#3187,#3188);+#3186 = CARTESIAN_POINT('',(-5.375,5.,0.));+#3187 = DIRECTION('',(1.,0.,-0.));+#3188 = DIRECTION('',(0.,-1.,0.));+#3189 = ADVANCED_FACE('',(#3190),#3196,.F.);+#3190 = FACE_BOUND('',#3191,.F.);+#3191 = EDGE_LOOP('',(#3192,#3193,#3194,#3195));+#3192 = ORIENTED_EDGE('',*,*,#3176,.F.);+#3193 = ORIENTED_EDGE('',*,*,#2737,.T.);+#3194 = ORIENTED_EDGE('',*,*,#2888,.T.);+#3195 = ORIENTED_EDGE('',*,*,#2586,.T.);+#3196 = PLANE('',#3197);+#3197 = AXIS2_PLACEMENT_3D('',#3198,#3199,#3200);+#3198 = CARTESIAN_POINT('',(-6.906718560679,1.3,1.483218261713));+#3199 = DIRECTION('',(0.,1.,0.));+#3200 = DIRECTION('',(0.,-0.,1.));+#3201 = MANIFOLD_SOLID_BREP('',#3202);+#3202 = CLOSED_SHELL('',(#3203,#3243,#3338,#3362,#3450,#3467,#3484,#3569+,#3586,#3617,#3641,#3666,#3690,#3708,#3733,#3757,#3782,#3799,#3824,+#3841,#3858,#3875));+#3203 = ADVANCED_FACE('',(#3204),#3238,.T.);+#3204 = FACE_BOUND('',#3205,.T.);+#3205 = EDGE_LOOP('',(#3206,#3216,#3224,#3232));+#3206 = ORIENTED_EDGE('',*,*,#3207,.T.);+#3207 = EDGE_CURVE('',#3208,#3210,#3212,.T.);+#3208 = VERTEX_POINT('',#3209);+#3209 = CARTESIAN_POINT('',(-5.375,3.92,2.45));+#3210 = VERTEX_POINT('',#3211);+#3211 = CARTESIAN_POINT('',(-6.375,3.92,2.45));+#3212 = LINE('',#3213,#3214);+#3213 = CARTESIAN_POINT('',(-4.425,3.92,2.45));+#3214 = VECTOR('',#3215,1.);+#3215 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#3216 = ORIENTED_EDGE('',*,*,#3217,.T.);+#3217 = EDGE_CURVE('',#3210,#3218,#3220,.T.);+#3218 = VERTEX_POINT('',#3219);+#3219 = CARTESIAN_POINT('',(-6.375,3.92,2.95));+#3220 = LINE('',#3221,#3222);+#3221 = CARTESIAN_POINT('',(-6.375,3.92,0.741609130856));+#3222 = VECTOR('',#3223,1.);+#3223 = DIRECTION('',(0.,4.439358670796E-31,1.));+#3224 = ORIENTED_EDGE('',*,*,#3225,.T.);+#3225 = EDGE_CURVE('',#3218,#3226,#3228,.T.);+#3226 = VERTEX_POINT('',#3227);+#3227 = CARTESIAN_POINT('',(-5.375,3.92,2.95));+#3228 = LINE('',#3229,#3230);+#3229 = CARTESIAN_POINT('',(-6.425,3.92,2.95));+#3230 = VECTOR('',#3231,1.);+#3231 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#3232 = ORIENTED_EDGE('',*,*,#3233,.T.);+#3233 = EDGE_CURVE('',#3226,#3208,#3234,.T.);+#3234 = LINE('',#3235,#3236);+#3235 = CARTESIAN_POINT('',(-5.375,3.92,0.741609130856));+#3236 = VECTOR('',#3237,1.);+#3237 = DIRECTION('',(0.,-4.439358670796E-31,-1.));+#3238 = PLANE('',#3239);+#3239 = AXIS2_PLACEMENT_3D('',#3240,#3241,#3242);+#3240 = CARTESIAN_POINT('',(-6.906718560679,3.92,1.483218261713));+#3241 = DIRECTION('',(5.017907410264E-31,1.,-4.439358670796E-31));+#3242 = DIRECTION('',(1.,-5.017907410264E-31,0.));+#3243 = ADVANCED_FACE('',(#3244),#3333,.T.);+#3244 = FACE_BOUND('',#3245,.T.);+#3245 = EDGE_LOOP('',(#3246,#3247,#3255,#3263,#3271,#3279,#3287,#3295,+#3303,#3311,#3319,#3327));+#3246 = ORIENTED_EDGE('',*,*,#3207,.F.);+#3247 = ORIENTED_EDGE('',*,*,#3248,.T.);+#3248 = EDGE_CURVE('',#3208,#3249,#3251,.T.);+#3249 = VERTEX_POINT('',#3250);+#3250 = CARTESIAN_POINT('',(-5.375,3.8,2.45));+#3251 = LINE('',#3252,#3253);+#3252 = CARTESIAN_POINT('',(-5.375,4.46,2.45));+#3253 = VECTOR('',#3254,1.);+#3254 = DIRECTION('',(0.,-1.,0.));+#3255 = ORIENTED_EDGE('',*,*,#3256,.F.);+#3256 = EDGE_CURVE('',#3257,#3249,#3259,.T.);+#3257 = VERTEX_POINT('',#3258);+#3258 = CARTESIAN_POINT('',(-4.425,3.8,2.45));+#3259 = LINE('',#3260,#3261);+#3260 = CARTESIAN_POINT('',(-4.425,3.8,2.45));+#3261 = VECTOR('',#3262,1.);+#3262 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#3263 = ORIENTED_EDGE('',*,*,#3264,.T.);+#3264 = EDGE_CURVE('',#3257,#3265,#3267,.T.);+#3265 = VERTEX_POINT('',#3266);+#3266 = CARTESIAN_POINT('',(-4.425,3.,2.45));+#3267 = LINE('',#3268,#3269);+#3268 = CARTESIAN_POINT('',(-4.425,3.8,2.45));+#3269 = VECTOR('',#3270,1.);+#3270 = DIRECTION('',(0.,-1.,0.));+#3271 = ORIENTED_EDGE('',*,*,#3272,.T.);+#3272 = EDGE_CURVE('',#3265,#3273,#3275,.T.);+#3273 = VERTEX_POINT('',#3274);+#3274 = CARTESIAN_POINT('',(-5.375,3.,2.45));+#3275 = LINE('',#3276,#3277);+#3276 = CARTESIAN_POINT('',(-4.425,3.,2.45));+#3277 = VECTOR('',#3278,1.);+#3278 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#3279 = ORIENTED_EDGE('',*,*,#3280,.T.);+#3280 = EDGE_CURVE('',#3273,#3281,#3283,.T.);+#3281 = VERTEX_POINT('',#3282);+#3282 = CARTESIAN_POINT('',(-5.375,2.88,2.45));+#3283 = LINE('',#3284,#3285);+#3284 = CARTESIAN_POINT('',(-5.375,4.46,2.45));+#3285 = VECTOR('',#3286,1.);+#3286 = DIRECTION('',(0.,-1.,0.));+#3287 = ORIENTED_EDGE('',*,*,#3288,.T.);+#3288 = EDGE_CURVE('',#3281,#3289,#3291,.T.);+#3289 = VERTEX_POINT('',#3290);+#3290 = CARTESIAN_POINT('',(-6.375,2.88,2.45));+#3291 = LINE('',#3292,#3293);+#3292 = CARTESIAN_POINT('',(-4.425,2.88,2.45));+#3293 = VECTOR('',#3294,1.);+#3294 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#3295 = ORIENTED_EDGE('',*,*,#3296,.T.);+#3296 = EDGE_CURVE('',#3289,#3297,#3299,.T.);+#3297 = VERTEX_POINT('',#3298);+#3298 = CARTESIAN_POINT('',(-6.375,3.,2.45));+#3299 = LINE('',#3300,#3301);+#3300 = CARTESIAN_POINT('',(-6.375,-0.54,2.45));+#3301 = VECTOR('',#3302,1.);+#3302 = DIRECTION('',(0.,1.,-0.));+#3303 = ORIENTED_EDGE('',*,*,#3304,.T.);+#3304 = EDGE_CURVE('',#3297,#3305,#3307,.T.);+#3305 = VERTEX_POINT('',#3306);+#3306 = CARTESIAN_POINT('',(-6.425,3.,2.45));+#3307 = LINE('',#3308,#3309);+#3308 = CARTESIAN_POINT('',(-4.425,3.,2.45));+#3309 = VECTOR('',#3310,1.);+#3310 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#3311 = ORIENTED_EDGE('',*,*,#3312,.F.);+#3312 = EDGE_CURVE('',#3313,#3305,#3315,.T.);+#3313 = VERTEX_POINT('',#3314);+#3314 = CARTESIAN_POINT('',(-6.425,3.8,2.45));+#3315 = LINE('',#3316,#3317);+#3316 = CARTESIAN_POINT('',(-6.425,3.8,2.45));+#3317 = VECTOR('',#3318,1.);+#3318 = DIRECTION('',(0.,-1.,0.));+#3319 = ORIENTED_EDGE('',*,*,#3320,.F.);+#3320 = EDGE_CURVE('',#3321,#3313,#3323,.T.);+#3321 = VERTEX_POINT('',#3322);+#3322 = CARTESIAN_POINT('',(-6.375,3.8,2.45));+#3323 = LINE('',#3324,#3325);+#3324 = CARTESIAN_POINT('',(-4.425,3.8,2.45));+#3325 = VECTOR('',#3326,1.);+#3326 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#3327 = ORIENTED_EDGE('',*,*,#3328,.T.);+#3328 = EDGE_CURVE('',#3321,#3210,#3329,.T.);+#3329 = LINE('',#3330,#3331);+#3330 = CARTESIAN_POINT('',(-6.375,-0.54,2.45));+#3331 = VECTOR('',#3332,1.);+#3332 = DIRECTION('',(0.,1.,-0.));+#3333 = PLANE('',#3334);+#3334 = AXIS2_PLACEMENT_3D('',#3335,#3336,#3337);+#3335 = CARTESIAN_POINT('',(-4.425,3.92,2.45));+#3336 = DIRECTION('',(-2.22044604925E-16,-0.,-1.));+#3337 = DIRECTION('',(-1.,0.,2.22044604925E-16));+#3338 = ADVANCED_FACE('',(#3339),#3357,.T.);+#3339 = FACE_BOUND('',#3340,.T.);+#3340 = EDGE_LOOP('',(#3341,#3342,#3350,#3356));+#3341 = ORIENTED_EDGE('',*,*,#3233,.F.);+#3342 = ORIENTED_EDGE('',*,*,#3343,.F.);+#3343 = EDGE_CURVE('',#3344,#3226,#3346,.T.);+#3344 = VERTEX_POINT('',#3345);+#3345 = CARTESIAN_POINT('',(-5.375,3.8,2.95));+#3346 = LINE('',#3347,#3348);+#3347 = CARTESIAN_POINT('',(-5.375,4.46,2.95));+#3348 = VECTOR('',#3349,1.);+#3349 = DIRECTION('',(-0.,1.,0.));+#3350 = ORIENTED_EDGE('',*,*,#3351,.T.);+#3351 = EDGE_CURVE('',#3344,#3249,#3352,.T.);+#3352 = LINE('',#3353,#3354);+#3353 = CARTESIAN_POINT('',(-5.375,3.8,0.741609130856));+#3354 = VECTOR('',#3355,1.);+#3355 = DIRECTION('',(-0.,0.,-1.));+#3356 = ORIENTED_EDGE('',*,*,#3248,.F.);+#3357 = PLANE('',#3358);+#3358 = AXIS2_PLACEMENT_3D('',#3359,#3360,#3361);+#3359 = CARTESIAN_POINT('',(-5.375,5.,0.));+#3360 = DIRECTION('',(1.,0.,-0.));+#3361 = DIRECTION('',(0.,-1.,0.));+#3362 = ADVANCED_FACE('',(#3363),#3445,.T.);+#3363 = FACE_BOUND('',#3364,.T.);+#3364 = EDGE_LOOP('',(#3365,#3366,#3374,#3382,#3390,#3398,#3406,#3414,+#3422,#3430,#3438,#3444));+#3365 = ORIENTED_EDGE('',*,*,#3225,.F.);+#3366 = ORIENTED_EDGE('',*,*,#3367,.T.);+#3367 = EDGE_CURVE('',#3218,#3368,#3370,.T.);+#3368 = VERTEX_POINT('',#3369);+#3369 = CARTESIAN_POINT('',(-6.375,3.8,2.95));+#3370 = LINE('',#3371,#3372);+#3371 = CARTESIAN_POINT('',(-6.375,-0.54,2.95));+#3372 = VECTOR('',#3373,1.);+#3373 = DIRECTION('',(0.,-1.,0.));+#3374 = ORIENTED_EDGE('',*,*,#3375,.F.);+#3375 = EDGE_CURVE('',#3376,#3368,#3378,.T.);+#3376 = VERTEX_POINT('',#3377);+#3377 = CARTESIAN_POINT('',(-6.425,3.8,2.95));+#3378 = LINE('',#3379,#3380);+#3379 = CARTESIAN_POINT('',(-6.425,3.8,2.95));+#3380 = VECTOR('',#3381,1.);+#3381 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#3382 = ORIENTED_EDGE('',*,*,#3383,.T.);+#3383 = EDGE_CURVE('',#3376,#3384,#3386,.T.);+#3384 = VERTEX_POINT('',#3385);+#3385 = CARTESIAN_POINT('',(-6.425,3.,2.95));+#3386 = LINE('',#3387,#3388);+#3387 = CARTESIAN_POINT('',(-6.425,3.8,2.95));+#3388 = VECTOR('',#3389,1.);+#3389 = DIRECTION('',(0.,-1.,0.));+#3390 = ORIENTED_EDGE('',*,*,#3391,.T.);+#3391 = EDGE_CURVE('',#3384,#3392,#3394,.T.);+#3392 = VERTEX_POINT('',#3393);+#3393 = CARTESIAN_POINT('',(-6.375,3.,2.95));+#3394 = LINE('',#3395,#3396);+#3395 = CARTESIAN_POINT('',(-6.425,3.,2.95));+#3396 = VECTOR('',#3397,1.);+#3397 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#3398 = ORIENTED_EDGE('',*,*,#3399,.T.);+#3399 = EDGE_CURVE('',#3392,#3400,#3402,.T.);+#3400 = VERTEX_POINT('',#3401);+#3401 = CARTESIAN_POINT('',(-6.375,2.88,2.95));+#3402 = LINE('',#3403,#3404);+#3403 = CARTESIAN_POINT('',(-6.375,-0.54,2.95));+#3404 = VECTOR('',#3405,1.);+#3405 = DIRECTION('',(0.,-1.,0.));+#3406 = ORIENTED_EDGE('',*,*,#3407,.T.);+#3407 = EDGE_CURVE('',#3400,#3408,#3410,.T.);+#3408 = VERTEX_POINT('',#3409);+#3409 = CARTESIAN_POINT('',(-5.375,2.88,2.95));+#3410 = LINE('',#3411,#3412);+#3411 = CARTESIAN_POINT('',(-6.425,2.88,2.95));+#3412 = VECTOR('',#3413,1.);+#3413 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#3414 = ORIENTED_EDGE('',*,*,#3415,.T.);+#3415 = EDGE_CURVE('',#3408,#3416,#3418,.T.);+#3416 = VERTEX_POINT('',#3417);+#3417 = CARTESIAN_POINT('',(-5.375,3.,2.95));+#3418 = LINE('',#3419,#3420);+#3419 = CARTESIAN_POINT('',(-5.375,4.46,2.95));+#3420 = VECTOR('',#3421,1.);+#3421 = DIRECTION('',(-0.,1.,0.));+#3422 = ORIENTED_EDGE('',*,*,#3423,.T.);+#3423 = EDGE_CURVE('',#3416,#3424,#3426,.T.);+#3424 = VERTEX_POINT('',#3425);+#3425 = CARTESIAN_POINT('',(-4.425,3.,2.95));+#3426 = LINE('',#3427,#3428);+#3427 = CARTESIAN_POINT('',(-6.425,3.,2.95));+#3428 = VECTOR('',#3429,1.);+#3429 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#3430 = ORIENTED_EDGE('',*,*,#3431,.F.);+#3431 = EDGE_CURVE('',#3432,#3424,#3434,.T.);+#3432 = VERTEX_POINT('',#3433);+#3433 = CARTESIAN_POINT('',(-4.425,3.8,2.95));+#3434 = LINE('',#3435,#3436);+#3435 = CARTESIAN_POINT('',(-4.425,3.8,2.95));+#3436 = VECTOR('',#3437,1.);+#3437 = DIRECTION('',(0.,-1.,0.));+#3438 = ORIENTED_EDGE('',*,*,#3439,.F.);+#3439 = EDGE_CURVE('',#3344,#3432,#3440,.T.);+#3440 = LINE('',#3441,#3442);+#3441 = CARTESIAN_POINT('',(-6.425,3.8,2.95));+#3442 = VECTOR('',#3443,1.);+#3443 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#3444 = ORIENTED_EDGE('',*,*,#3343,.T.);+#3445 = PLANE('',#3446);+#3446 = AXIS2_PLACEMENT_3D('',#3447,#3448,#3449);+#3447 = CARTESIAN_POINT('',(-6.425,3.92,2.95));+#3448 = DIRECTION('',(2.22044604925E-16,0.,1.));+#3449 = DIRECTION('',(1.,0.,-2.22044604925E-16));+#3450 = ADVANCED_FACE('',(#3451),#3462,.T.);+#3451 = FACE_BOUND('',#3452,.T.);+#3452 = EDGE_LOOP('',(#3453,#3454,#3455,#3461));+#3453 = ORIENTED_EDGE('',*,*,#3217,.F.);+#3454 = ORIENTED_EDGE('',*,*,#3328,.F.);+#3455 = ORIENTED_EDGE('',*,*,#3456,.T.);+#3456 = EDGE_CURVE('',#3321,#3368,#3457,.T.);+#3457 = LINE('',#3458,#3459);+#3458 = CARTESIAN_POINT('',(-6.375,3.8,0.741609130856));+#3459 = VECTOR('',#3460,1.);+#3460 = DIRECTION('',(0.,-0.,1.));+#3461 = ORIENTED_EDGE('',*,*,#3367,.F.);+#3462 = PLANE('',#3463);+#3463 = AXIS2_PLACEMENT_3D('',#3464,#3465,#3466);+#3464 = CARTESIAN_POINT('',(-6.375,-5.,0.));+#3465 = DIRECTION('',(-1.,0.,0.));+#3466 = DIRECTION('',(0.,1.,0.));+#3467 = ADVANCED_FACE('',(#3468),#3479,.T.);+#3468 = FACE_BOUND('',#3469,.T.);+#3469 = EDGE_LOOP('',(#3470,#3471,#3472,#3478));+#3470 = ORIENTED_EDGE('',*,*,#3351,.F.);+#3471 = ORIENTED_EDGE('',*,*,#3439,.T.);+#3472 = ORIENTED_EDGE('',*,*,#3473,.T.);+#3473 = EDGE_CURVE('',#3432,#3257,#3474,.T.);+#3474 = LINE('',#3475,#3476);+#3475 = CARTESIAN_POINT('',(-4.425,3.8,2.95));+#3476 = VECTOR('',#3477,1.);+#3477 = DIRECTION('',(0.,0.,-1.));+#3478 = ORIENTED_EDGE('',*,*,#3256,.T.);+#3479 = PLANE('',#3480);+#3480 = AXIS2_PLACEMENT_3D('',#3481,#3482,#3483);+#3481 = CARTESIAN_POINT('',(-6.906718560679,3.8,1.483218261713));+#3482 = DIRECTION('',(0.,1.,0.));+#3483 = DIRECTION('',(0.,-0.,1.));+#3484 = ADVANCED_FACE('',(#3485),#3564,.T.);+#3485 = FACE_BOUND('',#3486,.T.);+#3486 = EDGE_LOOP('',(#3487,#3497,#3505,#3514,#3522,#3529,#3530,#3531,+#3532,#3541,#3549,#3558));+#3487 = ORIENTED_EDGE('',*,*,#3488,.T.);+#3488 = EDGE_CURVE('',#3489,#3491,#3493,.T.);+#3489 = VERTEX_POINT('',#3490);+#3490 = CARTESIAN_POINT('',(-9.375,3.8,1.015962243071E-15));+#3491 = VERTEX_POINT('',#3492);+#3492 = CARTESIAN_POINT('',(-9.375,3.8,0.5));+#3493 = LINE('',#3494,#3495);+#3494 = CARTESIAN_POINT('',(-9.375,3.8,1.015962243071E-15));+#3495 = VECTOR('',#3496,1.);+#3496 = DIRECTION('',(0.,0.,1.));+#3497 = ORIENTED_EDGE('',*,*,#3498,.T.);+#3498 = EDGE_CURVE('',#3491,#3499,#3501,.T.);+#3499 = VERTEX_POINT('',#3500);+#3500 = CARTESIAN_POINT('',(-7.425,3.8,0.5));+#3501 = LINE('',#3502,#3503);+#3502 = CARTESIAN_POINT('',(-9.375,3.8,0.5));+#3503 = VECTOR('',#3504,1.);+#3504 = DIRECTION('',(1.,0.,0.));+#3505 = ORIENTED_EDGE('',*,*,#3506,.T.);+#3506 = EDGE_CURVE('',#3499,#3507,#3509,.T.);+#3507 = VERTEX_POINT('',#3508);+#3508 = CARTESIAN_POINT('',(-7.175,3.8,0.75));+#3509 = CIRCLE('',#3510,0.25);+#3510 = AXIS2_PLACEMENT_3D('',#3511,#3512,#3513);+#3511 = CARTESIAN_POINT('',(-7.425,3.8,0.75));+#3512 = DIRECTION('',(0.,-1.,0.));+#3513 = DIRECTION('',(3.5527136788E-15,0.,-1.));+#3514 = ORIENTED_EDGE('',*,*,#3515,.T.);+#3515 = EDGE_CURVE('',#3507,#3516,#3518,.T.);+#3516 = VERTEX_POINT('',#3517);+#3517 = CARTESIAN_POINT('',(-7.175,3.8,2.2));+#3518 = LINE('',#3519,#3520);+#3519 = CARTESIAN_POINT('',(-7.175,3.8,0.75));+#3520 = VECTOR('',#3521,1.);+#3521 = DIRECTION('',(0.,0.,1.));+#3522 = ORIENTED_EDGE('',*,*,#3523,.T.);+#3523 = EDGE_CURVE('',#3516,#3376,#3524,.T.);+#3524 = CIRCLE('',#3525,0.75);+#3525 = AXIS2_PLACEMENT_3D('',#3526,#3527,#3528);+#3526 = CARTESIAN_POINT('',(-6.425,3.8,2.2));+#3527 = DIRECTION('',(0.,1.,0.));+#3528 = DIRECTION('',(-1.,0.,5.921189464667E-16));+#3529 = ORIENTED_EDGE('',*,*,#3375,.T.);+#3530 = ORIENTED_EDGE('',*,*,#3456,.F.);+#3531 = ORIENTED_EDGE('',*,*,#3320,.T.);+#3532 = ORIENTED_EDGE('',*,*,#3533,.T.);+#3533 = EDGE_CURVE('',#3313,#3534,#3536,.T.);+#3534 = VERTEX_POINT('',#3535);+#3535 = CARTESIAN_POINT('',(-6.675,3.8,2.2));+#3536 = CIRCLE('',#3537,0.25);+#3537 = AXIS2_PLACEMENT_3D('',#3538,#3539,#3540);+#3538 = CARTESIAN_POINT('',(-6.425,3.8,2.2));+#3539 = DIRECTION('',(0.,-1.,0.));+#3540 = DIRECTION('',(-3.5527136788E-15,0.,1.));+#3541 = ORIENTED_EDGE('',*,*,#3542,.T.);+#3542 = EDGE_CURVE('',#3534,#3543,#3545,.T.);+#3543 = VERTEX_POINT('',#3544);+#3544 = CARTESIAN_POINT('',(-6.675,3.8,0.75));+#3545 = LINE('',#3546,#3547);+#3546 = CARTESIAN_POINT('',(-6.675,3.8,2.2));+#3547 = VECTOR('',#3548,1.);+#3548 = DIRECTION('',(0.,0.,-1.));+#3549 = ORIENTED_EDGE('',*,*,#3550,.T.);+#3550 = EDGE_CURVE('',#3543,#3551,#3553,.T.);+#3551 = VERTEX_POINT('',#3552);+#3552 = CARTESIAN_POINT('',(-7.425,3.8,5.551115123126E-16));+#3553 = CIRCLE('',#3554,0.75);+#3554 = AXIS2_PLACEMENT_3D('',#3555,#3556,#3557);+#3555 = CARTESIAN_POINT('',(-7.425,3.8,0.75));+#3556 = DIRECTION('',(0.,1.,0.));+#3557 = DIRECTION('',(1.,0.,-8.881784197001E-16));+#3558 = ORIENTED_EDGE('',*,*,#3559,.T.);+#3559 = EDGE_CURVE('',#3551,#3489,#3560,.T.);+#3560 = LINE('',#3561,#3562);+#3561 = CARTESIAN_POINT('',(-7.425,3.8,5.551115123126E-16));+#3562 = VECTOR('',#3563,1.);+#3563 = DIRECTION('',(-1.,0.,2.363337080814E-16));+#3564 = PLANE('',#3565);+#3565 = AXIS2_PLACEMENT_3D('',#3566,#3567,#3568);+#3566 = CARTESIAN_POINT('',(-6.906718560679,3.8,1.483218261713));+#3567 = DIRECTION('',(0.,1.,0.));+#3568 = DIRECTION('',(0.,-0.,1.));+#3569 = ADVANCED_FACE('',(#3570),#3581,.T.);+#3570 = FACE_BOUND('',#3571,.T.);+#3571 = EDGE_LOOP('',(#3572,#3573,#3579,#3580));+#3572 = ORIENTED_EDGE('',*,*,#3431,.T.);+#3573 = ORIENTED_EDGE('',*,*,#3574,.T.);+#3574 = EDGE_CURVE('',#3424,#3265,#3575,.T.);+#3575 = LINE('',#3576,#3577);+#3576 = CARTESIAN_POINT('',(-4.425,3.,2.95));+#3577 = VECTOR('',#3578,1.);+#3578 = DIRECTION('',(0.,0.,-1.));+#3579 = ORIENTED_EDGE('',*,*,#3264,.F.);+#3580 = ORIENTED_EDGE('',*,*,#3473,.F.);+#3581 = PLANE('',#3582);+#3582 = AXIS2_PLACEMENT_3D('',#3583,#3584,#3585);+#3583 = CARTESIAN_POINT('',(-4.425,3.8,2.95));+#3584 = DIRECTION('',(1.,0.,0.));+#3585 = DIRECTION('',(0.,0.,-1.));+#3586 = ADVANCED_FACE('',(#3587),#3612,.T.);+#3587 = FACE_BOUND('',#3588,.T.);+#3588 = EDGE_LOOP('',(#3589,#3597,#3605,#3611));+#3589 = ORIENTED_EDGE('',*,*,#3590,.T.);+#3590 = EDGE_CURVE('',#3489,#3591,#3593,.T.);+#3591 = VERTEX_POINT('',#3592);+#3592 = CARTESIAN_POINT('',(-9.375,3.,1.015962243071E-15));+#3593 = LINE('',#3594,#3595);+#3594 = CARTESIAN_POINT('',(-9.375,3.8,1.015962243071E-15));+#3595 = VECTOR('',#3596,1.);+#3596 = DIRECTION('',(0.,-1.,0.));+#3597 = ORIENTED_EDGE('',*,*,#3598,.T.);+#3598 = EDGE_CURVE('',#3591,#3599,#3601,.T.);+#3599 = VERTEX_POINT('',#3600);+#3600 = CARTESIAN_POINT('',(-9.375,3.,0.5));+#3601 = LINE('',#3602,#3603);+#3602 = CARTESIAN_POINT('',(-9.375,3.,1.015962243071E-15));+#3603 = VECTOR('',#3604,1.);+#3604 = DIRECTION('',(0.,0.,1.));+#3605 = ORIENTED_EDGE('',*,*,#3606,.F.);+#3606 = EDGE_CURVE('',#3491,#3599,#3607,.T.);+#3607 = LINE('',#3608,#3609);+#3608 = CARTESIAN_POINT('',(-9.375,3.8,0.5));+#3609 = VECTOR('',#3610,1.);+#3610 = DIRECTION('',(0.,-1.,0.));+#3611 = ORIENTED_EDGE('',*,*,#3488,.F.);+#3612 = PLANE('',#3613);+#3613 = AXIS2_PLACEMENT_3D('',#3614,#3615,#3616);+#3614 = CARTESIAN_POINT('',(-9.375,3.8,1.015962243071E-15));+#3615 = DIRECTION('',(-1.,0.,0.));+#3616 = DIRECTION('',(0.,0.,1.));+#3617 = ADVANCED_FACE('',(#3618),#3636,.T.);+#3618 = FACE_BOUND('',#3619,.T.);+#3619 = EDGE_LOOP('',(#3620,#3628,#3634,#3635));+#3620 = ORIENTED_EDGE('',*,*,#3621,.T.);+#3621 = EDGE_CURVE('',#3551,#3622,#3624,.T.);+#3622 = VERTEX_POINT('',#3623);+#3623 = CARTESIAN_POINT('',(-7.425,3.,5.551115123126E-16));+#3624 = LINE('',#3625,#3626);+#3625 = CARTESIAN_POINT('',(-7.425,3.8,5.551115123126E-16));+#3626 = VECTOR('',#3627,1.);+#3627 = DIRECTION('',(0.,-1.,0.));+#3628 = ORIENTED_EDGE('',*,*,#3629,.T.);+#3629 = EDGE_CURVE('',#3622,#3591,#3630,.T.);+#3630 = LINE('',#3631,#3632);+#3631 = CARTESIAN_POINT('',(-7.425,3.,5.551115123126E-16));+#3632 = VECTOR('',#3633,1.);+#3633 = DIRECTION('',(-1.,0.,2.363337080814E-16));+#3634 = ORIENTED_EDGE('',*,*,#3590,.F.);+#3635 = ORIENTED_EDGE('',*,*,#3559,.F.);+#3636 = PLANE('',#3637);+#3637 = AXIS2_PLACEMENT_3D('',#3638,#3639,#3640);+#3638 = CARTESIAN_POINT('',(-7.425,3.8,5.551115123126E-16));+#3639 = DIRECTION('',(-2.363337080814E-16,-0.,-1.));+#3640 = DIRECTION('',(-1.,0.,2.363337080814E-16));+#3641 = ADVANCED_FACE('',(#3642),#3661,.T.);+#3642 = FACE_BOUND('',#3643,.T.);+#3643 = EDGE_LOOP('',(#3644,#3652,#3659,#3660));+#3644 = ORIENTED_EDGE('',*,*,#3645,.T.);+#3645 = EDGE_CURVE('',#3543,#3646,#3648,.T.);+#3646 = VERTEX_POINT('',#3647);+#3647 = CARTESIAN_POINT('',(-6.675,3.,0.75));+#3648 = LINE('',#3649,#3650);+#3649 = CARTESIAN_POINT('',(-6.675,3.8,0.75));+#3650 = VECTOR('',#3651,1.);+#3651 = DIRECTION('',(0.,-1.,0.));+#3652 = ORIENTED_EDGE('',*,*,#3653,.T.);+#3653 = EDGE_CURVE('',#3646,#3622,#3654,.T.);+#3654 = CIRCLE('',#3655,0.75);+#3655 = AXIS2_PLACEMENT_3D('',#3656,#3657,#3658);+#3656 = CARTESIAN_POINT('',(-7.425,3.,0.75));+#3657 = DIRECTION('',(0.,1.,0.));+#3658 = DIRECTION('',(1.,0.,-8.881784197001E-16));+#3659 = ORIENTED_EDGE('',*,*,#3621,.F.);+#3660 = ORIENTED_EDGE('',*,*,#3550,.F.);+#3661 = CYLINDRICAL_SURFACE('',#3662,0.75);+#3662 = AXIS2_PLACEMENT_3D('',#3663,#3664,#3665);+#3663 = CARTESIAN_POINT('',(-7.425,3.8,0.75));+#3664 = DIRECTION('',(0.,1.,0.));+#3665 = DIRECTION('',(1.,0.,-8.881784197001E-16));+#3666 = ADVANCED_FACE('',(#3667),#3685,.T.);+#3667 = FACE_BOUND('',#3668,.T.);+#3668 = EDGE_LOOP('',(#3669,#3677,#3683,#3684));+#3669 = ORIENTED_EDGE('',*,*,#3670,.T.);+#3670 = EDGE_CURVE('',#3534,#3671,#3673,.T.);+#3671 = VERTEX_POINT('',#3672);+#3672 = CARTESIAN_POINT('',(-6.675,3.,2.2));+#3673 = LINE('',#3674,#3675);+#3674 = CARTESIAN_POINT('',(-6.675,3.8,2.2));+#3675 = VECTOR('',#3676,1.);+#3676 = DIRECTION('',(0.,-1.,0.));+#3677 = ORIENTED_EDGE('',*,*,#3678,.T.);+#3678 = EDGE_CURVE('',#3671,#3646,#3679,.T.);+#3679 = LINE('',#3680,#3681);+#3680 = CARTESIAN_POINT('',(-6.675,3.,2.2));+#3681 = VECTOR('',#3682,1.);+#3682 = DIRECTION('',(0.,0.,-1.));+#3683 = ORIENTED_EDGE('',*,*,#3645,.F.);+#3684 = ORIENTED_EDGE('',*,*,#3542,.F.);+#3685 = PLANE('',#3686);+#3686 = AXIS2_PLACEMENT_3D('',#3687,#3688,#3689);+#3687 = CARTESIAN_POINT('',(-6.675,3.8,2.2));+#3688 = DIRECTION('',(1.,0.,0.));+#3689 = DIRECTION('',(0.,0.,-1.));+#3690 = ADVANCED_FACE('',(#3691),#3703,.F.);+#3691 = FACE_BOUND('',#3692,.T.);+#3692 = EDGE_LOOP('',(#3693,#3694,#3701,#3702));+#3693 = ORIENTED_EDGE('',*,*,#3312,.T.);+#3694 = ORIENTED_EDGE('',*,*,#3695,.T.);+#3695 = EDGE_CURVE('',#3305,#3671,#3696,.T.);+#3696 = CIRCLE('',#3697,0.25);+#3697 = AXIS2_PLACEMENT_3D('',#3698,#3699,#3700);+#3698 = CARTESIAN_POINT('',(-6.425,3.,2.2));+#3699 = DIRECTION('',(0.,-1.,0.));+#3700 = DIRECTION('',(-3.5527136788E-15,0.,1.));+#3701 = ORIENTED_EDGE('',*,*,#3670,.F.);+#3702 = ORIENTED_EDGE('',*,*,#3533,.F.);+#3703 = CYLINDRICAL_SURFACE('',#3704,0.25);+#3704 = AXIS2_PLACEMENT_3D('',#3705,#3706,#3707);+#3705 = CARTESIAN_POINT('',(-6.425,3.8,2.2));+#3706 = DIRECTION('',(-0.,1.,-0.));+#3707 = DIRECTION('',(-3.5527136788E-15,0.,1.));+#3708 = ADVANCED_FACE('',(#3709),#3728,.T.);+#3709 = FACE_BOUND('',#3710,.T.);+#3710 = EDGE_LOOP('',(#3711,#3719,#3726,#3727));+#3711 = ORIENTED_EDGE('',*,*,#3712,.T.);+#3712 = EDGE_CURVE('',#3516,#3713,#3715,.T.);+#3713 = VERTEX_POINT('',#3714);+#3714 = CARTESIAN_POINT('',(-7.175,3.,2.2));+#3715 = LINE('',#3716,#3717);+#3716 = CARTESIAN_POINT('',(-7.175,3.8,2.2));+#3717 = VECTOR('',#3718,1.);+#3718 = DIRECTION('',(0.,-1.,0.));+#3719 = ORIENTED_EDGE('',*,*,#3720,.T.);+#3720 = EDGE_CURVE('',#3713,#3384,#3721,.T.);+#3721 = CIRCLE('',#3722,0.75);+#3722 = AXIS2_PLACEMENT_3D('',#3723,#3724,#3725);+#3723 = CARTESIAN_POINT('',(-6.425,3.,2.2));+#3724 = DIRECTION('',(0.,1.,0.));+#3725 = DIRECTION('',(-1.,0.,5.921189464667E-16));+#3726 = ORIENTED_EDGE('',*,*,#3383,.F.);+#3727 = ORIENTED_EDGE('',*,*,#3523,.F.);+#3728 = CYLINDRICAL_SURFACE('',#3729,0.75);+#3729 = AXIS2_PLACEMENT_3D('',#3730,#3731,#3732);+#3730 = CARTESIAN_POINT('',(-6.425,3.8,2.2));+#3731 = DIRECTION('',(0.,1.,0.));+#3732 = DIRECTION('',(-1.,0.,5.921189464667E-16));+#3733 = ADVANCED_FACE('',(#3734),#3752,.T.);+#3734 = FACE_BOUND('',#3735,.T.);+#3735 = EDGE_LOOP('',(#3736,#3744,#3750,#3751));+#3736 = ORIENTED_EDGE('',*,*,#3737,.T.);+#3737 = EDGE_CURVE('',#3507,#3738,#3740,.T.);+#3738 = VERTEX_POINT('',#3739);+#3739 = CARTESIAN_POINT('',(-7.175,3.,0.75));+#3740 = LINE('',#3741,#3742);+#3741 = CARTESIAN_POINT('',(-7.175,3.8,0.75));+#3742 = VECTOR('',#3743,1.);+#3743 = DIRECTION('',(0.,-1.,0.));+#3744 = ORIENTED_EDGE('',*,*,#3745,.T.);+#3745 = EDGE_CURVE('',#3738,#3713,#3746,.T.);+#3746 = LINE('',#3747,#3748);+#3747 = CARTESIAN_POINT('',(-7.175,3.,0.75));+#3748 = VECTOR('',#3749,1.);+#3749 = DIRECTION('',(0.,0.,1.));+#3750 = ORIENTED_EDGE('',*,*,#3712,.F.);+#3751 = ORIENTED_EDGE('',*,*,#3515,.F.);+#3752 = PLANE('',#3753);+#3753 = AXIS2_PLACEMENT_3D('',#3754,#3755,#3756);+#3754 = CARTESIAN_POINT('',(-7.175,3.8,0.75));+#3755 = DIRECTION('',(-1.,0.,0.));+#3756 = DIRECTION('',(0.,0.,1.));+#3757 = ADVANCED_FACE('',(#3758),#3777,.F.);+#3758 = FACE_BOUND('',#3759,.T.);+#3759 = EDGE_LOOP('',(#3760,#3768,#3775,#3776));+#3760 = ORIENTED_EDGE('',*,*,#3761,.T.);+#3761 = EDGE_CURVE('',#3499,#3762,#3764,.T.);+#3762 = VERTEX_POINT('',#3763);+#3763 = CARTESIAN_POINT('',(-7.425,3.,0.5));+#3764 = LINE('',#3765,#3766);+#3765 = CARTESIAN_POINT('',(-7.425,3.8,0.5));+#3766 = VECTOR('',#3767,1.);+#3767 = DIRECTION('',(0.,-1.,0.));+#3768 = ORIENTED_EDGE('',*,*,#3769,.T.);+#3769 = EDGE_CURVE('',#3762,#3738,#3770,.T.);+#3770 = CIRCLE('',#3771,0.25);+#3771 = AXIS2_PLACEMENT_3D('',#3772,#3773,#3774);+#3772 = CARTESIAN_POINT('',(-7.425,3.,0.75));+#3773 = DIRECTION('',(0.,-1.,0.));+#3774 = DIRECTION('',(3.5527136788E-15,0.,-1.));+#3775 = ORIENTED_EDGE('',*,*,#3737,.F.);+#3776 = ORIENTED_EDGE('',*,*,#3506,.F.);+#3777 = CYLINDRICAL_SURFACE('',#3778,0.25);+#3778 = AXIS2_PLACEMENT_3D('',#3779,#3780,#3781);+#3779 = CARTESIAN_POINT('',(-7.425,3.8,0.75));+#3780 = DIRECTION('',(-0.,1.,-0.));+#3781 = DIRECTION('',(3.5527136788E-15,0.,-1.));+#3782 = ADVANCED_FACE('',(#3783),#3794,.T.);+#3783 = FACE_BOUND('',#3784,.T.);+#3784 = EDGE_LOOP('',(#3785,#3786,#3792,#3793));+#3785 = ORIENTED_EDGE('',*,*,#3606,.T.);+#3786 = ORIENTED_EDGE('',*,*,#3787,.T.);+#3787 = EDGE_CURVE('',#3599,#3762,#3788,.T.);+#3788 = LINE('',#3789,#3790);+#3789 = CARTESIAN_POINT('',(-9.375,3.,0.5));+#3790 = VECTOR('',#3791,1.);+#3791 = DIRECTION('',(1.,0.,0.));+#3792 = ORIENTED_EDGE('',*,*,#3761,.F.);+#3793 = ORIENTED_EDGE('',*,*,#3498,.F.);+#3794 = PLANE('',#3795);+#3795 = AXIS2_PLACEMENT_3D('',#3796,#3797,#3798);+#3796 = CARTESIAN_POINT('',(-9.375,3.8,0.5));+#3797 = DIRECTION('',(-0.,0.,1.));+#3798 = DIRECTION('',(1.,0.,0.));+#3799 = ADVANCED_FACE('',(#3800),#3819,.F.);+#3800 = FACE_BOUND('',#3801,.F.);+#3801 = EDGE_LOOP('',(#3802,#3803,#3804,#3805,#3806,#3807,#3808,#3814,+#3815,#3816,#3817,#3818));+#3802 = ORIENTED_EDGE('',*,*,#3598,.T.);+#3803 = ORIENTED_EDGE('',*,*,#3787,.T.);+#3804 = ORIENTED_EDGE('',*,*,#3769,.T.);+#3805 = ORIENTED_EDGE('',*,*,#3745,.T.);+#3806 = ORIENTED_EDGE('',*,*,#3720,.T.);+#3807 = ORIENTED_EDGE('',*,*,#3391,.T.);+#3808 = ORIENTED_EDGE('',*,*,#3809,.F.);+#3809 = EDGE_CURVE('',#3297,#3392,#3810,.T.);+#3810 = LINE('',#3811,#3812);+#3811 = CARTESIAN_POINT('',(-6.375,3.,0.741609130856));+#3812 = VECTOR('',#3813,1.);+#3813 = DIRECTION('',(0.,-0.,1.));+#3814 = ORIENTED_EDGE('',*,*,#3304,.T.);+#3815 = ORIENTED_EDGE('',*,*,#3695,.T.);+#3816 = ORIENTED_EDGE('',*,*,#3678,.T.);+#3817 = ORIENTED_EDGE('',*,*,#3653,.T.);+#3818 = ORIENTED_EDGE('',*,*,#3629,.T.);+#3819 = PLANE('',#3820);+#3820 = AXIS2_PLACEMENT_3D('',#3821,#3822,#3823);+#3821 = CARTESIAN_POINT('',(-6.906718560679,3.,1.483218261713));+#3822 = DIRECTION('',(0.,1.,0.));+#3823 = DIRECTION('',(0.,-0.,1.));+#3824 = ADVANCED_FACE('',(#3825),#3836,.T.);+#3825 = FACE_BOUND('',#3826,.T.);+#3826 = EDGE_LOOP('',(#3827,#3828,#3829,#3835));+#3827 = ORIENTED_EDGE('',*,*,#3809,.F.);+#3828 = ORIENTED_EDGE('',*,*,#3296,.F.);+#3829 = ORIENTED_EDGE('',*,*,#3830,.T.);+#3830 = EDGE_CURVE('',#3289,#3400,#3831,.T.);+#3831 = LINE('',#3832,#3833);+#3832 = CARTESIAN_POINT('',(-6.375,2.88,0.741609130856));+#3833 = VECTOR('',#3834,1.);+#3834 = DIRECTION('',(0.,4.439358670796E-31,1.));+#3835 = ORIENTED_EDGE('',*,*,#3399,.F.);+#3836 = PLANE('',#3837);+#3837 = AXIS2_PLACEMENT_3D('',#3838,#3839,#3840);+#3838 = CARTESIAN_POINT('',(-6.375,-5.,0.));+#3839 = DIRECTION('',(-1.,0.,0.));+#3840 = DIRECTION('',(0.,1.,0.));+#3841 = ADVANCED_FACE('',(#3842),#3853,.F.);+#3842 = FACE_BOUND('',#3843,.F.);+#3843 = EDGE_LOOP('',(#3844,#3845,#3846,#3847));+#3844 = ORIENTED_EDGE('',*,*,#3288,.T.);+#3845 = ORIENTED_EDGE('',*,*,#3830,.T.);+#3846 = ORIENTED_EDGE('',*,*,#3407,.T.);+#3847 = ORIENTED_EDGE('',*,*,#3848,.T.);+#3848 = EDGE_CURVE('',#3408,#3281,#3849,.T.);+#3849 = LINE('',#3850,#3851);+#3850 = CARTESIAN_POINT('',(-5.375,2.88,0.741609130856));+#3851 = VECTOR('',#3852,1.);+#3852 = DIRECTION('',(0.,-4.439358670796E-31,-1.));+#3853 = PLANE('',#3854);+#3854 = AXIS2_PLACEMENT_3D('',#3855,#3856,#3857);+#3855 = CARTESIAN_POINT('',(-6.906718560679,2.88,1.483218261713));+#3856 = DIRECTION('',(5.017907410264E-31,1.,-4.439358670796E-31));+#3857 = DIRECTION('',(1.,-5.017907410264E-31,0.));+#3858 = ADVANCED_FACE('',(#3859),#3870,.T.);+#3859 = FACE_BOUND('',#3860,.T.);+#3860 = EDGE_LOOP('',(#3861,#3867,#3868,#3869));+#3861 = ORIENTED_EDGE('',*,*,#3862,.F.);+#3862 = EDGE_CURVE('',#3416,#3273,#3863,.T.);+#3863 = LINE('',#3864,#3865);+#3864 = CARTESIAN_POINT('',(-5.375,3.,0.741609130856));+#3865 = VECTOR('',#3866,1.);+#3866 = DIRECTION('',(-0.,0.,-1.));+#3867 = ORIENTED_EDGE('',*,*,#3415,.F.);+#3868 = ORIENTED_EDGE('',*,*,#3848,.T.);+#3869 = ORIENTED_EDGE('',*,*,#3280,.F.);+#3870 = PLANE('',#3871);+#3871 = AXIS2_PLACEMENT_3D('',#3872,#3873,#3874);+#3872 = CARTESIAN_POINT('',(-5.375,5.,0.));+#3873 = DIRECTION('',(1.,0.,-0.));+#3874 = DIRECTION('',(0.,-1.,0.));+#3875 = ADVANCED_FACE('',(#3876),#3882,.F.);+#3876 = FACE_BOUND('',#3877,.F.);+#3877 = EDGE_LOOP('',(#3878,#3879,#3880,#3881));+#3878 = ORIENTED_EDGE('',*,*,#3862,.F.);+#3879 = ORIENTED_EDGE('',*,*,#3423,.T.);+#3880 = ORIENTED_EDGE('',*,*,#3574,.T.);+#3881 = ORIENTED_EDGE('',*,*,#3272,.T.);+#3882 = PLANE('',#3883);+#3883 = AXIS2_PLACEMENT_3D('',#3884,#3885,#3886);+#3884 = CARTESIAN_POINT('',(-6.906718560679,3.,1.483218261713));+#3885 = DIRECTION('',(0.,1.,0.));+#3886 = DIRECTION('',(0.,-0.,1.));+#3887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3)+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#3891))+GLOBAL_UNIT_ASSIGNED_CONTEXT((#3888,#3889,#3890)) REPRESENTATION_CONTEXT+('Context #1','3D Context with UNIT and UNCERTAINTY') );+#3888 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#3889 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#3890 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#3891 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#3888,+'distance_accuracy_value','confusion accuracy');+#3892 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#3893,#3895);+#3893 = ( REPRESENTATION_RELATIONSHIP('','',#860,#837)+REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#3894)+SHAPE_REPRESENTATION_RELATIONSHIP() );+#3894 = ITEM_DEFINED_TRANSFORMATION('','',#11,#838);+#3895 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',+#3896);+#3896 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('82','','',#832,#855,$);+#3897 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#857));+#3898 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(+#3899),#819);+#3899 = STYLED_ITEM('color',(#3900),#471);+#3900 = PRESENTATION_STYLE_ASSIGNMENT((#3901));+#3901 = SURFACE_STYLE_USAGE(.BOTH.,#3902);+#3902 = SURFACE_SIDE_STYLE('',(#3903));+#3903 = SURFACE_STYLE_FILL_AREA(#3904);+#3904 = FILL_AREA_STYLE('',(#3905));+#3905 = FILL_AREA_STYLE_COLOUR('',#3906);+#3906 = COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#3907 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(+#3908,#3915,#3922,#3929,#3936),#3887);+#3908 = STYLED_ITEM('color',(#3909),#861);+#3909 = PRESENTATION_STYLE_ASSIGNMENT((#3910));+#3910 = SURFACE_STYLE_USAGE(.BOTH.,#3911);+#3911 = SURFACE_SIDE_STYLE('',(#3912));+#3912 = SURFACE_STYLE_FILL_AREA(#3913);+#3913 = FILL_AREA_STYLE('',(#3914));+#3914 = FILL_AREA_STYLE_COLOUR('',#3906);+#3915 = STYLED_ITEM('color',(#3916),#1547);+#3916 = PRESENTATION_STYLE_ASSIGNMENT((#3917));+#3917 = SURFACE_STYLE_USAGE(.BOTH.,#3918);+#3918 = SURFACE_SIDE_STYLE('',(#3919));+#3919 = SURFACE_STYLE_FILL_AREA(#3920);+#3920 = FILL_AREA_STYLE('',(#3921));+#3921 = FILL_AREA_STYLE_COLOUR('',#3906);+#3922 = STYLED_ITEM('color',(#3923),#2233);+#3923 = PRESENTATION_STYLE_ASSIGNMENT((#3924));+#3924 = SURFACE_STYLE_USAGE(.BOTH.,#3925);+#3925 = SURFACE_SIDE_STYLE('',(#3926));+#3926 = SURFACE_STYLE_FILL_AREA(#3927);+#3927 = FILL_AREA_STYLE('',(#3928));+#3928 = FILL_AREA_STYLE_COLOUR('',#3906);+#3929 = STYLED_ITEM('color',(#3930),#2515);+#3930 = PRESENTATION_STYLE_ASSIGNMENT((#3931));+#3931 = SURFACE_STYLE_USAGE(.BOTH.,#3932);+#3932 = SURFACE_SIDE_STYLE('',(#3933));+#3933 = SURFACE_STYLE_FILL_AREA(#3934);+#3934 = FILL_AREA_STYLE('',(#3935));+#3935 = FILL_AREA_STYLE_COLOUR('',#3906);+#3936 = STYLED_ITEM('color',(#3937),#3201);+#3937 = PRESENTATION_STYLE_ASSIGNMENT((#3938));+#3938 = SURFACE_STYLE_USAGE(.BOTH.,#3939);+#3939 = SURFACE_SIDE_STYLE('',(#3940));+#3940 = SURFACE_STYLE_FILL_AREA(#3941);+#3941 = FILL_AREA_STYLE('',(#3942));+#3942 = FILL_AREA_STYLE_COLOUR('',#3906);+#3943 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(+#3944),#429);+#3944 = STYLED_ITEM('color',(#3945),#87);+#3945 = PRESENTATION_STYLE_ASSIGNMENT((#3946));+#3946 = SURFACE_STYLE_USAGE(.BOTH.,#3947);+#3947 = SURFACE_SIDE_STYLE('',(#3948));+#3948 = SURFACE_STYLE_FILL_AREA(#3949);+#3949 = FILL_AREA_STYLE('',(#3950));+#3950 = FILL_AREA_STYLE_COLOUR('',#3951);+#3951 = COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);+ENDSEC;+END-ISO-10303-21;
docs/bts441rg-datasheet.pdfadded⋯ 1 unchanged line ⋯
docs/hero.pngadded⋯ 1 unchanged line ⋯
package.jsonadded+174@@ -0,0 +1,174 @@+{+ "slug": "bts441rg",+ "version": "0.1.0",+ "type": "component",+ "description": "Infineon Others, TO-263-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "others",+ "bts441rg",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "bts441rg.kicad_sym",+ "bts441rg.kicad_mod",+ "bts441rg.glb",+ "bts441rg.step",+ "bts441rg.lbr",+ "docs/hero.png",+ "docs/bts441rg-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "bts441rg-hero.glb",+ "bts441rg-hero.overlay.json",+ "bts441rg-etched.glb"+ ],+ "component": {+ "mpn": "BTS441RG",+ "manufacturer": "Infineon",+ "package": "TO-263-4",+ "pin_count": 5,+ "category": "Others",+ "subcategory": "Others",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/bf94e80c68374cb30d12cebb8408fee0.pdf",+ "parts": {+ "symbol": "bts441rg.kicad_sym",+ "footprint": "bts441rg.kicad_mod",+ "model_3d": "bts441rg-hero.glb",+ "model_3d_plain": "bts441rg-etched.glb",+ "model_3d_step": "bts441rg-etched.step",+ "model_3d_step_plain": "bts441rg.step",+ "lbr": "bts441rg.lbr"+ },+ "distributor_links": {+ "lcsc": "C5185777"+ },+ "distributor_check": {+ "checked_at": "2026-10-22T19:13:35Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "quota"+ },+ "mouser": {+ "pn": null,+ "status": "quota"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin of the logic and protection circuitry, with operating current IGND of 2 mA typ (4 mA max) at VIN = 5 V, and a 150 Ω external resistor required in the GND connection for reverse battery protection."+ },+ {+ "number": "2",+ "name": "IN",+ "type": "input",+ "description": "Ground-referenced CMOS-compatible input with 3.8 kΩ typ input resistance, turn-on threshold 1.2 to 2.2 V, turn-off threshold min 0.8 V, and DC input voltage range -10 to +16 V."+ },+ {+ "number": "3",+ "name": "VBB",+ "type": "power_in",+ "description": "Positive supply pin with operating voltage 4.75 V to 41 V (Vbb(on)), 43 V max supply rating, and on-state resistance to OUT of 20 mΩ max at 25 °C."+ },+ {+ "number": "4",+ "name": "ST",+ "type": "output",+ "description": "Open-drain diagnostic status output that reports open load in the OFF state and overtemperature, with a low voltage of max 0.4 V at IST = 1.6 mA and a DC current rating of ±5.0 mA."+ },+ {+ "number": "5",+ "name": "OUT",+ "type": "power_out",+ "description": "Protected high-side power output to the load, with nominal load current 21 A, current limit 65 A typ, and inductive-load clamp VON(CL) of 43 to 52 V at 25 to 150 °C."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The package hint says TO-263-4, but the datasheet lists only PG-TO263-5 (5 pins) for BTS441RG, so I ; The pin table and diagram on page 4 are garbled in the text. Pins 1, 2, 3 and 5 are named in the ele; The datasheet text does not say whether the package tab is connected to Vbb, so no tab pin is includ"+ ],+ "pages_sent": 16,+ "cost_usd": 0.0968,+ "at": "2026-10-22T19:13:25"+ },+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/bf94e80c68374cb30d12cebb8408fee0.pdf",+ "pages": 16,+ "sha256": "5258cb038d177ad2",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 5,+ "described": 5,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "bts441rg.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 15.0,+ 10.0,+ 4.42+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "840b1746d588f26c9da1ac1da5ae0ea37a68ee1fcf684282a7ac0726d8358845",+ "checked": "2026-10-22",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "bts441rg-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 15.0,+ 10.0,+ 4.42+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "47c469b1170fd41a2a91b3a13aca4c51c7454850886f098f58d2678beb008d19",+ "checked": "2026-10-22",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+180@@ -0,0 +1,180 @@+{+ "slug": "bts441rg",+ "version": "0.1.0",+ "type": "component",+ "description": "Infineon Others, TO-263-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "others",+ "bts441rg",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "bts441rg.kicad_sym",+ "bts441rg.kicad_mod",+ "bts441rg.glb",+ "bts441rg.step",+ "bts441rg.lbr",+ "docs/hero.png",+ "docs/bts441rg-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "bts441rg-hero.glb",+ "bts441rg-hero.overlay.json",+ "bts441rg-etched.glb"+ ],+ "component": {+ "mpn": "BTS441RG",+ "manufacturer": "Infineon",+ "package": "TO-263-4",+ "pin_count": 5,+ "category": "Others",+ "subcategory": "Others",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/bf94e80c68374cb30d12cebb8408fee0.pdf",+ "parts": {+ "symbol": "bts441rg.kicad_sym",+ "footprint": "bts441rg.kicad_mod",+ "model_3d": "bts441rg-hero.glb",+ "model_3d_plain": "bts441rg-etched.glb",+ "model_3d_step": "bts441rg-etched.step",+ "model_3d_step_plain": "bts441rg.step",+ "lbr": "bts441rg.lbr"+ },+ "distributor_links": {+ "lcsc": "C5185777"+ },+ "distributor_check": {+ "checked_at": "2026-10-22T19:13:35Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "quota"+ },+ "mouser": {+ "pn": null,+ "status": "quota"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin of the logic and protection circuitry, with operating current IGND of 2 mA typ (4 mA max) at VIN = 5 V, and a 150 Ω external resistor required in the GND connection for reverse battery protection."+ },+ {+ "number": "2",+ "name": "IN",+ "type": "input",+ "description": "Ground-referenced CMOS-compatible input with 3.8 kΩ typ input resistance, turn-on threshold 1.2 to 2.2 V, turn-off threshold min 0.8 V, and DC input voltage range -10 to +16 V."+ },+ {+ "number": "3",+ "name": "VBB",+ "type": "power_in",+ "description": "Positive supply pin with operating voltage 4.75 V to 41 V (Vbb(on)), 43 V max supply rating, and on-state resistance to OUT of 20 mΩ max at 25 °C."+ },+ {+ "number": "4",+ "name": "ST",+ "type": "output",+ "description": "Open-drain diagnostic status output that reports open load in the OFF state and overtemperature, with a low voltage of max 0.4 V at IST = 1.6 mA and a DC current rating of ±5.0 mA."+ },+ {+ "number": "5",+ "name": "OUT",+ "type": "power_out",+ "description": "Protected high-side power output to the load, with nominal load current 21 A, current limit 65 A typ, and inductive-load clamp VON(CL) of 43 to 52 V at 25 to 150 °C."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The package hint says TO-263-4, but the datasheet lists only PG-TO263-5 (5 pins) for BTS441RG, so I ; The pin table and diagram on page 4 are garbled in the text. Pins 1, 2, 3 and 5 are named in the ele; The datasheet text does not say whether the package tab is connected to Vbb, so no tab pin is includ"+ ],+ "pages_sent": 16,+ "cost_usd": 0.0968,+ "at": "2026-10-22T19:13:25"+ },+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/bf94e80c68374cb30d12cebb8408fee0.pdf",+ "pages": 16,+ "sha256": "5258cb038d177ad2",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 5,+ "described": 5,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "bts441rg.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 15,+ 10,+ 4.42+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "840b1746d588f26c9da1ac1da5ae0ea37a68ee1fcf684282a7ac0726d8358845",+ "checked": "2026-10-22",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "bts441rg-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 15,+ 10,+ 4.42+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "47c469b1170fd41a2a91b3a13aca4c51c7454850886f098f58d2678beb008d19",+ "checked": "2026-10-22",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>bts441rg</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>bts441rg</title>