component
BR24G08F-3GTE2
Public Made by Adomby adom
ROHM EEPROM, SOP-8-4.4mm. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (LCSC_PN C509764). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+26−6
br24g08f-3gte2.lbr+20−2@@ -62,6 +62,18 @@ <smd name="6" x="2.4750" y="-0.6350" dx="1.9500" dy="0.6000" layer="1"/> <smd name="7" x="2.4750" y="0.6350" dx="1.9500" dy="0.6000" layer="1"/> <smd name="8" x="2.4750" y="1.9050" dx="1.9500" dy="0.6000" layer="1"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-2.6000" y="2.4700"/>+ <vertex x="-2.8400" y="2.8000"/>+ <vertex x="-2.3600" y="2.8000"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.9750" y="2.4500"/>+ <vertex x="1.9500" y="2.4500"/>+ <vertex x="1.9500" y="-2.4500"/>+ <vertex x="-1.9500" y="-2.4500"/>+ <vertex x="-1.9500" y="1.4750"/>+ </polygon> <wire x1="-2.0600" y1="2.5600" x2="2.0600" y2="2.5600" width="0.1200" layer="21"/> <wire x1="-2.0600" y1="2.4650" x2="-2.0600" y2="2.5600" width="0.1200" layer="21"/> <wire x1="-2.0600" y1="-2.5600" x2="-2.0600" y2="-2.4650" width="0.1200" layer="21"/>@@ -70,7 +82,7 @@ <wire x1="2.0600" y1="-2.5600" x2="-2.0600" y2="-2.5600" width="0.1200" layer="21"/> <text x="0" y="3.480" size="1.27" layer="25" align="bottom-center">>NAME</text> <text x="0" y="-3.480" size="1.27" layer="27" align="top-center">>VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-2.6000" y="2.4700"/><vertex x="-2.8400" y="2.8000"/><vertex x="-2.3600" y="2.8000"/></polygon></package>+</package> </packages> <symbols> <symbol name="BR24G08F-3GTE2">@@ -108,7 +120,13 @@ <connect gate="G$1" pin="SCL" pad="6"/> <connect gate="G$1" pin="SDA" pad="5"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="BR24G08F-3GTE2" constant="no"/>+ <attribute name="MANUFACTURER" value="ROHM" constant="no"/>+ <attribute name="LCSC_PN" value="C509764" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
page.json+6−4@@ -26,7 +26,9 @@ "model_3d_step": "br24g08f-3gte2.step", "lbr": "br24g08f-3gte2.lbr" },- "distributor_links": {},+ "distributor_links": {+ "lcsc": "C509764"+ }, "pins": [ { "number": "1",@@ -44,7 +46,7 @@ "number": "3", "name": "A2", "type": "input",- "description": "Slave address setting input A2. Selects the upper bit of the I2C slave address, allowing two BR24G08-3 devices to share the same bus. Must NOT be left open; drive to VCC or GND. VIH ≥ 0.7·VCC (VCC ≥ 1.7 V) or 0.8·VCC (VCC < 1.7 V); VIL ≤ 0.3·VCC or 0.2·VCC respectively."+ "description": "Slave address setting input A2. Selects the upper bit of the I2C slave address, allowing two BR24G08-3 devices to share the same bus. Must NOT be left open; drive to VCC or GND. VIH \u2265 0.7\u00b7VCC (VCC \u2265 1.7 V) or 0.8\u00b7VCC (VCC < 1.7 V); VIL \u2264 0.3\u00b7VCC or 0.2\u00b7VCC respectively." }, { "number": "4",@@ -56,7 +58,7 @@ "number": "5", "name": "SDA", "type": "bidirectional",- "description": "I2C serial data input/output. Open-drain output requires an external pull-up resistor to VCC. VOL1 ≤ 0.4 V at IOL = 3.0 mA (2.5 V ≤ VCC ≤ 5.5 V); VOL2 ≤ 0.2 V at IOL = 0.7 mA (1.6 V ≤ VCC < 2.5 V). Supports up to fSCL = 400 kHz."+ "description": "I2C serial data input/output. Open-drain output requires an external pull-up resistor to VCC. VOL1 \u2264 0.4 V at IOL = 3.0 mA (2.5 V \u2264 VCC \u2264 5.5 V); VOL2 \u2264 0.2 V at IOL = 0.7 mA (1.6 V \u2264 VCC < 2.5 V). Supports up to fSCL = 400 kHz." }, { "number": "6",@@ -74,7 +76,7 @@ "number": "8", "name": "VCC", "type": "power_in",- "description": "Positive supply input. Operating range 1.6 V to 5.5 V; absolute maximum 6.5 V. Recommend a 0.1 µF bypass capacitor placed close to the pin between VCC and GND."+ "description": "Positive supply input. Operating range 1.6 V to 5.5 V; absolute maximum 6.5 V. Recommend a 0.1 \u00b5F bypass capacitor placed close to the pin between VCC and GND." } ], "provenance": {