component
BR24G08F-3GTE2
Public Made by Adomby adom
ROHM EEPROM, SOP-8-4.4mm. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -44,7 +44,7 @@ "number": "3", "name": "A2", "type": "input",- "description": "Slave address setting input A2. Selects the upper bit of the I2C slave address, allowing two BR24G08-3 devices to share the same bus. Must NOT be left open; drive to VCC or GND. VIH \u2265 0.7\u00b7VCC (VCC \u2265 1.7 V) or 0.8\u00b7VCC (VCC < 1.7 V); VIL \u2264 0.3\u00b7VCC or 0.2\u00b7VCC respectively."+ "description": "Slave address setting input A2. Selects the upper bit of the I2C slave address, allowing two BR24G08-3 devices to share the same bus. Must NOT be left open; drive to VCC or GND. VIH ≥ 0.7·VCC (VCC ≥ 1.7 V) or 0.8·VCC (VCC < 1.7 V); VIL ≤ 0.3·VCC or 0.2·VCC respectively." }, { "number": "4",@@ -56,7 +56,7 @@ "number": "5", "name": "SDA", "type": "bidirectional",- "description": "I2C serial data input/output. Open-drain output requires an external pull-up resistor to VCC. VOL1 \u2264 0.4 V at IOL = 3.0 mA (2.5 V \u2264 VCC \u2264 5.5 V); VOL2 \u2264 0.2 V at IOL = 0.7 mA (1.6 V \u2264 VCC < 2.5 V). Supports up to fSCL = 400 kHz."+ "description": "I2C serial data input/output. Open-drain output requires an external pull-up resistor to VCC. VOL1 ≤ 0.4 V at IOL = 3.0 mA (2.5 V ≤ VCC ≤ 5.5 V); VOL2 ≤ 0.2 V at IOL = 0.7 mA (1.6 V ≤ VCC < 2.5 V). Supports up to fSCL = 400 kHz." }, { "number": "6",@@ -74,7 +74,7 @@ "number": "8", "name": "VCC", "type": "power_in",- "description": "Positive supply input. Operating range 1.6 V to 5.5 V; absolute maximum 6.5 V. Recommend a 0.1 \u00b5F bypass capacitor placed close to the pin between VCC and GND."+ "description": "Positive supply input. Operating range 1.6 V to 5.5 V; absolute maximum 6.5 V. Recommend a 0.1 µF bypass capacitor placed close to the pin between VCC and GND." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/br24g08f-3gte2-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }