component
BQ79600PWRQ1
Public Made by Adomby adom
Texas Instruments Battery Management, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+14−11@@ -53,43 +53,43 @@ "number": "1", "name": "DVDD", "type": "power_out",- "description": "1.8V regulated output for internal digital circuits requiring 0.22-0.47\u00b5F bypass capacitor to GND."+ "description": "1.8V regulated output for internal digital circuits requiring 0.22-0.47µF bypass capacitor to GND." }, { "number": "2", "name": "NFAULT", "type": "tri_state",- "description": "Open-drain active-low fault output requiring 100k\u03a9 pull-up to VIO or connection to GND when unused."+ "description": "Open-drain active-low fault output requiring 100kΩ pull-up to VIO or connection to GND when unused." }, { "number": "3", "name": "VIO", "type": "power_in",- "description": "3.135-5.25V power supply for UART/SPI logic that must power up before SCLK, nCS, RX/MOSI, TX/MISO, NFAULT and require 0.1\u00b5F bypass."+ "description": "3.135-5.25V power supply for UART/SPI logic that must power up before SCLK, nCS, RX/MOSI, TX/MISO, NFAULT and require 0.1µF bypass." }, { "number": "4", "name": "RX/MOSI", "type": "input",- "description": "UART receiver or SPI master-out-slave-in input requiring 10-100k\u03a9 pull-up to VIO and must not be left floating."+ "description": "UART receiver or SPI master-out-slave-in input requiring 10-100kΩ pull-up to VIO and must not be left floating." }, { "number": "5", "name": "TX/MISO", "type": "output",- "description": "UART transmitter or SPI slave-in-master-out output driving high in idle mode and requiring 10-100k\u03a9 MCU-side pull-up."+ "description": "UART transmitter or SPI slave-in-master-out output driving high in idle mode and requiring 10-100kΩ MCU-side pull-up." }, { "number": "6", "name": "SCLK", "type": "input",- "description": "SPI clock input requiring 10-100k\u03a9 pull-down to GND or direct GND connection when unused."+ "description": "SPI clock input requiring 10-100kΩ pull-down to GND or direct GND connection when unused." }, { "number": "7", "name": "nCS", "type": "input",- "description": "SPI active-low chip select requiring 10-100k\u03a9 pull-up to VIO in SPI mode and cannot be hardwired to GND."+ "description": "SPI active-low chip select requiring 10-100kΩ pull-up to VIO in SPI mode and cannot be hardwired to GND." }, { "number": "8",@@ -131,19 +131,19 @@ "number": "14", "name": "CVDD", "type": "power_out",- "description": "5V daisy-chain supply from internal LDO requiring 0.22-0.47\u00b5F decouple capacitor to GND."+ "description": "5V daisy-chain supply from internal LDO requiring 0.22-0.47µF decouple capacitor to GND." }, { "number": "15", "name": "BAT", "type": "power_in",- "description": "5.5-40V unregulated battery supply for internal LDOs connected through 10\u03a9 resistor with 0.1\u00b5F bypass to GND."+ "description": "5.5-40V unregulated battery supply for internal LDOs connected through 10Ω resistor with 0.1µF bypass to GND." }, { "number": "16", "name": "INH", "type": "tri_state",- "description": "PMOS open-drain inhibit output requiring 100k\u03a9 pull-down to GND or connection to BAT pin when reverse-wakeup not used."+ "description": "PMOS open-drain inhibit output requiring 100kΩ pull-down to GND or connection to BAT pin when reverse-wakeup not used." } ], "provenance": {@@ -223,5 +223,8 @@ "docs/bq79600pwrq1-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }