component
BQ76200PWR
Public Made by Adomby adom
Texas Instruments Battery Management, TSSOP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+164−8@@ -1,13 +1,174 @@ {+ "schema_version": 1,+ "type": "component", "slug": "bq76200pwr",+ "title": "BQ76200PWR",+ "brief": "Texas Instruments Battery Management, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Texas Instruments Battery Management, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "bq76200pwr" ],+ "component": {+ "mpn": "BQ76200PWR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-16",+ "pin_count": 16,+ "category": "PMIC",+ "subcategory": "Battery Management",+ "datasheet": "https://www.ti.com/lit/ds/symlink/bq76200.pdf",+ "parts": {+ "symbol": "bq76200pwr.kicad_sym",+ "footprint": "bq76200pwr.kicad_mod",+ "model_3d": "bq76200pwr.glb",+ "model_3d_step": "bq76200pwr.step",+ "lbr": "bq76200pwr.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "VDDCP",+ "type": "power_out",+ "description": "Charge pump output. Connect a capacitor (typ 470 nF) to BAT. Do not load this pin. Charge pump voltage V(VDDCP)-V(BAT) is typically 12 V (9 V-14 V)."+ },+ {+ "number": "2",+ "name": "BAT",+ "type": "power_in",+ "description": "Top of battery stack. Battery cell input supply pin; recommended operating range 8 V to 75 V (100 V absolute max)."+ },+ {+ "number": "3",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave the pin floating."+ },+ {+ "number": "4",+ "name": "CHG_EN",+ "type": "input",+ "description": "Charge FET enable. Digital input from AFE or MCU (VIL max 0.6 V, VIH min 1.2 V, 15 V absolute max). Internal ~1 M\u03a9 pull-down. Must be current limited (max 5 mA)."+ },+ {+ "number": "5",+ "name": "CP_EN",+ "type": "input",+ "description": "Charge pump enable. Internally logic-ORed with CHG_EN and DSG_EN signals. Digital input (VIL max 0.6 V, VIH min 1.2 V, 15 V absolute max) with internal ~1 M\u03a9 pull-down."+ },+ {+ "number": "6",+ "name": "DSG_EN",+ "type": "input",+ "description": "Discharge FET enable. Digital input (VIL max 0.6 V, VIH min 1.2 V, 15 V absolute max) with internal ~1 M\u03a9 pull-down."+ },+ {+ "number": "7",+ "name": "PMON_EN",+ "type": "input",+ "description": "Pack monitor enable. Enables the internal switch (typ 2.5 k\u03a9, 1.5-3.5 k\u03a9) between PACK and PACKDIV pins to allow pack-voltage sensing. Recommended to tie to ground if unused."+ },+ {+ "number": "8",+ "name": "PCHG_EN",+ "type": "input",+ "description": "Precharge FET enable. Digital input controlling the P-channel precharge FET driver. Recommended to tie to ground if unused."+ },+ {+ "number": "9",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference."+ },+ {+ "number": "10",+ "name": "PACKDIV",+ "type": "output",+ "description": "PACK voltage after internal switch. Connect to MCU ADC via an external resistor divider to sense the pack voltage when PMON_EN is high. Leave floating if unused."+ },+ {+ "number": "11",+ "name": "PACK",+ "type": "power_in",+ "description": "Analog input from the PACK+ terminal. Charger/load voltage input; recommended range 0 V to 75 V (100 V absolute max)."+ },+ {+ "number": "12",+ "name": "DSG",+ "type": "output",+ "description": "Gate drive for discharge N-channel high-side FET. Gate drive voltage V(DSG)-V(PACK) typically 12 V (9-14 V) when DSG_EN=Hi. Driver on-resistance 3.5 k\u03a9 typ; off-resistance 1 k\u03a9 typ."+ },+ {+ "number": "13",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave the pin floating."+ },+ {+ "number": "14",+ "name": "PCHG",+ "type": "output",+ "description": "Gate drive for precharge P-channel FET. Provides current-limited pre-charge of significantly depleted cell packs. Gate drive V(PACK)-V(PCHG) typically 12 V (5-14 V) when V(PACK)>17 V and V(BAT)<V(PACK). Leave floating if unused."+ },+ {+ "number": "15",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave the pin floating."+ },+ {+ "number": "16",+ "name": "CHG",+ "type": "output",+ "description": "Gate drive for charge N-channel high-side FET. Gate drive voltage V(CHG)-V(BAT) typically 12 V (9-14 V) when CHG_EN=Hi. Driver on-resistance 1.1 k\u03a9 typ; off-resistance 0.3 k\u03a9 typ."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/bq76200.pdf",+ "pages": 30,+ "sha256": "fb2ebcf8e875aa0a",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "TSSOP-16",+ "Category": "PMIC",+ "Pins": "16"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "bq76200pwr"+ ],+ "discovery_pitch": "BQ76200PWR (Texas Instruments) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +186,5 @@ "docs/bq76200pwr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }