BQ34Z100PWR-R2

@@ -59,7 +59,7 @@         "number": "2",         "name": "VEN",         "type": "output",-        "description": "Active high voltage translation enable output; controls input voltage divider on/off to reduce power consumption (typ 45 \u00b5A)."+        "description": "Active high voltage translation enable output; controls input voltage divider on/off to reduce power consumption (typ 45 µA)."       },       {         "number": "3",@@ -83,13 +83,13 @@         "number": "6",         "name": "REGIN",         "type": "power_in",-        "description": "Internal LDO input; supply range 2.7 V to 4.5 V for normal operation; decouple with 0.1-\u00b5F ceramic capacitor to VSS."+        "description": "Internal LDO input; supply range 2.7 V to 4.5 V for normal operation; decouple with 0.1-µF ceramic capacitor to VSS."       },       {         "number": "7",         "name": "REG25",         "type": "power_out",-        "description": "2.5 V regulated output from internal LDO; decouple with 1-\u00b5F ceramic capacitor to VSS; output voltage range 2.3 V to 2.7 V."+        "description": "2.5 V regulated output from internal LDO; decouple with 1-µF ceramic capacitor to VSS; output voltage range 2.3 V to 2.7 V."       },       {         "number": "8",@@ -125,13 +125,13 @@         "number": "13",         "name": "P4/SCL",         "type": "input",-        "description": "I2C serial communication clock input; use with 10-k\u03a9 pullup resistor (typical); also used for LED 4 in four-LED mode; if unused, leave floating or tie to VSS."+        "description": "I2C serial communication clock input; use with 10-kΩ pullup resistor (typical); also used for LED 4 in four-LED mode; if unused, leave floating or tie to VSS."       },       {         "number": "14",         "name": "P3/SDA",         "type": "bidirectional",-        "description": "Open-drain I2C serial communication data line (target); use with 10-k\u03a9 pullup resistor (typical); also used for LED 3 in four-LED mode; if unused, leave floating or tie to VSS."+        "description": "Open-drain I2C serial communication data line (target); use with 10-kΩ pullup resistor (typical); also used for LED 3 in four-LED mode; if unused, leave floating or tie to VSS."       }     ],     "provenance": {@@ -168,6 +168,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "bq34z100pwr-r2.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          5.0,+          1.0+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3ee5786aae56190997aa793ba3cfc003fd616782770e29719b4562f012982245",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "bq34z100pwr-r2-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          5.0,+          1.0+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "8ba25c5eeacf84044f706a4efd3923e25157f4f240396b6f7216bd3dd98fc969",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}