component
BQ34Z100PWR-G1
Public Made by Adomby adom
Texas Instruments Battery Management, TSSOP-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+152−8@@ -1,13 +1,162 @@ {+ "schema_version": 1,+ "type": "component", "slug": "bq34z100pwr-g1",+ "title": "BQ34Z100PWR-G1",+ "brief": "Texas Instruments Battery Management, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Texas Instruments Battery Management, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "bq34z100pwr-g1" ],+ "component": {+ "mpn": "BQ34Z100PWR-G1",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-14",+ "pin_count": 14,+ "category": "PMIC",+ "subcategory": "Battery Management",+ "datasheet": "https://www.ti.com/lit/ds/symlink/bq34z100pwr-g1.pdf",+ "parts": {+ "symbol": "bq34z100pwr-g1.kicad_sym",+ "footprint": "bq34z100pwr-g1.kicad_mod",+ "model_3d": "bq34z100pwr-g1.glb",+ "model_3d_step": "bq34z100pwr-g1.step",+ "lbr": "bq34z100pwr-g1.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "P2",+ "type": "output",+ "description": "LED 2 drive (multi-LED display mode) or unused. Tie to VSS when not driving an LED."+ },+ {+ "number": "2",+ "name": "VEN",+ "type": "output",+ "description": "Active-high voltage translation enable output. Optionally switches the external BAT-divider on/off (typ 45 uA saved) when driving a series N-FET. Leave floating or tie to VSS if unused."+ },+ {+ "number": "3",+ "name": "P1",+ "type": "output",+ "description": "LED 1 drive; also used to drive the single LED in single-LED mode via an N-FET. Tie to VSS when not driving an LED."+ },+ {+ "number": "4",+ "name": "BAT",+ "type": "input",+ "description": "Translated battery-voltage sense input from the external resistor divider. VBAT abs-max 5.5 V; ADC input range VSS-0.125 V to 5 V."+ },+ {+ "number": "5",+ "name": "CE",+ "type": "input",+ "description": "Chip Enable. Driving low disconnects the internal LDO from REGIN to place the device in shutdown."+ },+ {+ "number": "6",+ "name": "REGIN",+ "type": "power_in",+ "description": "Internal LDO regulator input, 2.45 V to 5.5 V (abs-max). Decouple with a 0.1-uF X5R ceramic to VSS."+ },+ {+ "number": "7",+ "name": "REG25",+ "type": "power_out",+ "description": "2.5-V (typ) output of the internal LDO, also the internal VCC rail. Decouple with a 1-uF (0.47-uF min) ceramic capacitor to VSS."+ },+ {+ "number": "8",+ "name": "VSS",+ "type": "power_in",+ "description": "Device ground reference."+ },+ {+ "number": "9",+ "name": "SRP",+ "type": "input",+ "description": "Coulomb-counter positive analog input (nearest BAT-). Connects across the pack sense resistor with SRN; input range VSS-0.125 V to 0.125 V."+ },+ {+ "number": "10",+ "name": "SRN",+ "type": "input",+ "description": "Coulomb-counter negative analog input (nearest PACK-). Connects across the pack sense resistor with SRP; input range VSS-0.125 V to 0.125 V."+ },+ {+ "number": "11",+ "name": "P6/TS",+ "type": "input",+ "description": "Pack thermistor sense input; use a 103AT-type (10 kOhm at 25 degC) NTC. Input range VSS-0.05 V to 1 V."+ },+ {+ "number": "12",+ "name": "P5/HDQ",+ "type": "bidirectional",+ "description": "Open-drain HDQ single-wire slave communication line. Leave floating or tie to VSS if unused. Also usable as GPIO P5."+ },+ {+ "number": "13",+ "name": "P4/SCL",+ "type": "input",+ "description": "I2C-compatible slave serial clock input; use a 10-kOhm (typ) pull-up to VCC. Also functions as LED 4 drive in four-LED mode, or GPIO P4. Leave floating or tie to VSS if unused."+ },+ {+ "number": "14",+ "name": "P3/SDA",+ "type": "bidirectional",+ "description": "Open-drain I2C-compatible slave serial data line; use a 10-kOhm (typ) pull-up to VCC. Also functions as LED 3 drive in four-LED mode, or GPIO P3. Leave floating or tie to VSS if unused."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/bq34z100pwr-g1.pdf",+ "pages": 65,+ "sha256": "d96dc1ca902eb588",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "TSSOP-14",+ "Category": "PMIC",+ "Pins": "14"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "bq34z100pwr-g1"+ ],+ "discovery_pitch": "BQ34Z100PWR-G1 (Texas Instruments) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +174,5 @@ "docs/bq34z100pwr-g1-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }