← Commit history

Initial commit: component/bq294700dsgt

Ray ·b88b837e39 ·
2 files changed +211
README.mdadded+46
@@ -0,0 +1,46 @@+# BQ294700DSGT++**Texas Instruments** · Battery Management · WSON-8-EP(2x2)++BQ294700DSGT from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD | power_in | Unregulated power supply input, recommended 3V to 20V, absolute maximum 30V. |+| 2 | V4 | input | Cell voltage sensing input for fourth cell from battery bottom (V4-V3 differential), 0-5V input range, -0.3V to 30V absolute maximum. |+| 3 | V3 | input | Cell voltage sensing input for third cell from battery bottom (V3-V2 differential), 0-5V input range, -0.3V to 30V absolute maximum. |+| 4 | V2 | input | Cell voltage sensing input for second cell from battery bottom (V2-V1 differential), 0-5V input range, -0.3V to 30V absolute maximum. |+| 5 | V1 | input | Cell voltage sensing input for lowest cell (V1-VSS differential), 0-5V input range, -0.3V to 30V absolute maximum. |+| 6 | VSS | power_in | Ground return, electrical connection to IC ground and negative terminal of lowest battery cell, absolute maximum 30V. |+| 7 | CD | output | Delay timer capacitor connection; IC charges and then discharges external capacitor for overvoltage detection delay timing, 0-5V range, -0.3V to 30V absolute maximum. |+| 8 | OUT | output | Overvoltage fault signal output (CMOS active high configuration); outputs 250-400mV low (100µA sink) at normal condition, outputs 6V typical / VDD-0.3V max (4.5mA source) when overvoltage detected. |+| 9 | PWPD | power_in | Exposed thermal pad for die cooling; Texas Instruments recommends soldering to VSS plane on PCB for thermal and mechanical performance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WSON-8-EP(2x2) |+| Category | Power Management (PMIC) |+| Pins | 9 |++## CAD (KiCad official)++- Symbol: `BQ294700DSGT`+- Footprint: `Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm`+- 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)+- 3D model files: `bq294700dsgt-etched.step` / `bq294700dsgt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `bq294700dsgt.step` / `bq294700dsgt.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/bq2947) (30 pp, sha256 `0bb66de94396f561`, retrieved 2026-10-01, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/bq294700dsgt-datasheet.pdf)
page.jsonadded+165
@@ -0,0 +1,165 @@+{+  "slug": "bq294700dsgt",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Battery Management, WSON-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "bq294700dsgt",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "bq294700dsgt.kicad_sym",+    "bq294700dsgt.kicad_mod",+    "bq294700dsgt.glb",+    "bq294700dsgt.step",+    "bq294700dsgt.lbr",+    "docs/hero.png",+    "docs/bq294700dsgt-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "BQ294700DSGT",+    "manufacturer": "Texas Instruments",+    "package": "WSON-8-EP(2x2)",+    "pin_count": 9,+    "category": "Power Management (PMIC)",+    "subcategory": "Battery Management",+    "datasheet": "https://www.ti.com/cn/lit/gpn/bq2947",+    "parts": {+      "symbol": "bq294700dsgt.kicad_sym",+      "footprint": "bq294700dsgt.kicad_mod",+      "model_3d": "bq294700dsgt-etched.glb",+      "model_3d_plain": "bq294700dsgt.glb",+      "model_3d_step": "bq294700dsgt-etched.step",+      "model_3d_step_plain": "bq294700dsgt.step",+      "lbr": "bq294700dsgt.lbr"+    },+    "distributor_links": {+      "lcsc": "C2864936",+      "digikey": "296-BQ294700DSGTTR-ND",+      "mouser": "595-BQ294700DSGT"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T03:28:00Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-BQ294700DSGTTR-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-BQ294700DSGT",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VDD",+        "type": "power_in",+        "description": "Unregulated power supply input, recommended 3V to 20V, absolute maximum 30V."+      },+      {+        "number": "2",+        "name": "V4",+        "type": "input",+        "description": "Cell voltage sensing input for fourth cell from battery bottom (V4-V3 differential), 0-5V input range, -0.3V to 30V absolute maximum."+      },+      {+        "number": "3",+        "name": "V3",+        "type": "input",+        "description": "Cell voltage sensing input for third cell from battery bottom (V3-V2 differential), 0-5V input range, -0.3V to 30V absolute maximum."+      },+      {+        "number": "4",+        "name": "V2",+        "type": "input",+        "description": "Cell voltage sensing input for second cell from battery bottom (V2-V1 differential), 0-5V input range, -0.3V to 30V absolute maximum."+      },+      {+        "number": "5",+        "name": "V1",+        "type": "input",+        "description": "Cell voltage sensing input for lowest cell (V1-VSS differential), 0-5V input range, -0.3V to 30V absolute maximum."+      },+      {+        "number": "6",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground return, electrical connection to IC ground and negative terminal of lowest battery cell, absolute maximum 30V."+      },+      {+        "number": "7",+        "name": "CD",+        "type": "output",+        "description": "Delay timer capacitor connection; IC charges and then discharges external capacitor for overvoltage detection delay timing, 0-5V range, -0.3V to 30V absolute maximum."+      },+      {+        "number": "8",+        "name": "OUT",+        "type": "output",+        "description": "Overvoltage fault signal output (CMOS active high configuration); outputs 250-400mV low (100µA sink) at normal condition, outputs 6V typical / VDD-0.3V max (4.5mA source) when overvoltage detected."+      },+      {+        "number": "9",+        "name": "PWPD",+        "type": "power_in",+        "description": "Exposed thermal pad for die cooling; Texas Instruments recommends soldering to VSS plane on PCB for thermal and mechanical performance."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: BQ294700DSGT is CMOS active-high output variant per device comparison table (page 3). Some other BQ2; Operating temperature for BQ294700DSGT variant is -40 to 85°C per package option addendum (page 19),",+          "1/9 pins cited to the wrong page (name found elsewhere): ['9:PWPD@p27']"+        ],+        "pages_sent": 30,+        "cost_usd": 0.1838,+        "at": "2026-10-01T03:27:45"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/bq2947",+        "pages": 30,+        "sha256": "0bb66de94396f561",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 9,+        "described": 9,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file