← Commit history

Initial commit: component/bq29312pwr

Ray ·4c4bc1d280 ·
2 files changed +312
README.mdadded+60
@@ -0,0 +1,60 @@+# BQ29312PWR++**Texas Instruments** · Battery Management · TSSOP-24++BQ29312PWR from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BAT | power_in | Diode protected BAT+ terminal and primary power source. |+| 2 | DSG | output | Push-pull output discharge FET gate drive. |+| 3 | VC1 | input | Sense voltage input terminal for most positive cell and balance current input for most positive cell. |+| 4 | VC2 | input | Sense voltage input terminal for second most positive cell, balance current input for second most positive cell and return balance current for most positive cell. |+| 5 | VC3 | input | Sense voltage input terminal for third most positive cell, balance current input for third most positive cell and return balance current for second most positive cell. |+| 6 | VC4 | input | Sense voltage input terminal for least positive cell, balance current input for least positive cell and return balance current for third most positive cell. |+| 7 | VC5 | input | Sense voltage input terminal for most negative cell, return balance current for least positive cell. |+| 8 | SR1 | input | Current sense positive terminal when charging relative to SR2. |+| 9 | SR2 | input | Current sense negative terminal when discharging relative to SR2 current sense terminal. |+| 10 | WDI | input | Digital input that provides the timing clock for the OC and SC delays and also acts as the watchdog clock. |+| 11 | CELL | output | Output of scaled value of the measured cell voltage. |+| 12 | GND | power_in | Analog ground pin and negative pack terminal. |+| 13 | SCLK | bidirectional | Open-drain bidirectional serial interface clock with internal 10 kΩ pull-up to V(REG). |+| 14 | SDATA | bidirectional | Open-drain bidirectional serial interface data with internal 10 kΩ pull-up to V(REG). |+| 15 | GND | power_in | Connect to GND. |+| 16 | XALERT | tri_state | Open-drain output used to indicate status register changes with internal 100 kΩ pull-up to V(REG). |+| 17 | TOUT | output | Provides thermistor bias current. |+| 18 | REG | power_out | Integrated 3.3-V regulator output. |+| 19 | SLEEP | input | This pin is pulled up to V(REG) internally; open or high level activates Sleep mode. |+| 20 | CHG | output | Push-pull output charge FET gate drive. |+| 21 | ZVCHG | output | The ZVCHG FET drive is connected here. |+| 22 | PACK | power_in | PACK positive terminal and alternative power source. |+| 23 | PMS | input | 0-V charge configuration select pin; CHG terminal ON/OFF is determined by this pin. |+| 24 | OD | tri_state | NCH FET open drain output. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-24 |+| Category | Power Management (PMIC) |+| Pins | 24 |++## CAD (KiCad official)++- Symbol: `BQ29312PWR`+- Footprint: `Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm`+- 3D model: TSSOP-24 (KiCad packages3D, STEP)+- 3D model files: `bq29312pwr-etched.step` / `bq29312pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `bq29312pwr.step` / `bq29312pwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/bq29312.pdf) (39 pp, sha256 `d4d1510be5e6af00`, retrieved 2026-10-01, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/bq29312pwr-datasheet.pdf)
page.jsonadded+252
@@ -0,0 +1,252 @@+{+  "slug": "bq29312pwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Battery Management, TSSOP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "bq29312pwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "bq29312pwr.kicad_sym",+    "bq29312pwr.kicad_mod",+    "bq29312pwr.glb",+    "bq29312pwr.step",+    "bq29312pwr.lbr",+    "docs/hero.png",+    "docs/bq29312pwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "BQ29312PWR",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-24",+    "pin_count": 24,+    "category": "Power Management (PMIC)",+    "subcategory": "Battery Management",+    "datasheet": "https://www.ti.com/lit/ds/symlink/bq29312.pdf",+    "parts": {+      "symbol": "bq29312pwr.kicad_sym",+      "footprint": "bq29312pwr.kicad_mod",+      "model_3d": "bq29312pwr-etched.glb",+      "model_3d_plain": "bq29312pwr.glb",+      "model_3d_step": "bq29312pwr-etched.step",+      "model_3d_step_plain": "bq29312pwr.step",+      "lbr": "bq29312pwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2876935",+      "digikey": "BQ29312PWR-ND",+      "mouser": "595-BQ29312PWR"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T15:27:47Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "BQ29312PWR-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-BQ29312PWR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "BAT",+        "type": "power_in",+        "description": "Diode protected BAT+ terminal and primary power source."+      },+      {+        "number": "2",+        "name": "DSG",+        "type": "output",+        "description": "Push-pull output discharge FET gate drive."+      },+      {+        "number": "3",+        "name": "VC1",+        "type": "input",+        "description": "Sense voltage input terminal for most positive cell and balance current input for most positive cell."+      },+      {+        "number": "4",+        "name": "VC2",+        "type": "input",+        "description": "Sense voltage input terminal for second most positive cell, balance current input for second most positive cell and return balance current for most positive cell."+      },+      {+        "number": "5",+        "name": "VC3",+        "type": "input",+        "description": "Sense voltage input terminal for third most positive cell, balance current input for third most positive cell and return balance current for second most positive cell."+      },+      {+        "number": "6",+        "name": "VC4",+        "type": "input",+        "description": "Sense voltage input terminal for least positive cell, balance current input for least positive cell and return balance current for third most positive cell."+      },+      {+        "number": "7",+        "name": "VC5",+        "type": "input",+        "description": "Sense voltage input terminal for most negative cell, return balance current for least positive cell."+      },+      {+        "number": "8",+        "name": "SR1",+        "type": "input",+        "description": "Current sense positive terminal when charging relative to SR2."+      },+      {+        "number": "9",+        "name": "SR2",+        "type": "input",+        "description": "Current sense negative terminal when discharging relative to SR2 current sense terminal."+      },+      {+        "number": "10",+        "name": "WDI",+        "type": "input",+        "description": "Digital input that provides the timing clock for the OC and SC delays and also acts as the watchdog clock."+      },+      {+        "number": "11",+        "name": "CELL",+        "type": "output",+        "description": "Output of scaled value of the measured cell voltage."+      },+      {+        "number": "12",+        "name": "GND",+        "type": "power_in",+        "description": "Analog ground pin and negative pack terminal."+      },+      {+        "number": "13",+        "name": "SCLK",+        "type": "bidirectional",+        "description": "Open-drain bidirectional serial interface clock with internal 10 kΩ pull-up to V(REG)."+      },+      {+        "number": "14",+        "name": "SDATA",+        "type": "bidirectional",+        "description": "Open-drain bidirectional serial interface data with internal 10 kΩ pull-up to V(REG)."+      },+      {+        "number": "15",+        "name": "GND",+        "type": "power_in",+        "description": "Connect to GND."+      },+      {+        "number": "16",+        "name": "XALERT",+        "type": "tri_state",+        "description": "Open-drain output used to indicate status register changes with internal 100 kΩ pull-up to V(REG)."+      },+      {+        "number": "17",+        "name": "TOUT",+        "type": "output",+        "description": "Provides thermistor bias current."+      },+      {+        "number": "18",+        "name": "REG",+        "type": "power_out",+        "description": "Integrated 3.3-V regulator output."+      },+      {+        "number": "19",+        "name": "SLEEP",+        "type": "input",+        "description": "This pin is pulled up to V(REG) internally; open or high level activates Sleep mode."+      },+      {+        "number": "20",+        "name": "CHG",+        "type": "output",+        "description": "Push-pull output charge FET gate drive."+      },+      {+        "number": "21",+        "name": "ZVCHG",+        "type": "output",+        "description": "The ZVCHG FET drive is connected here."+      },+      {+        "number": "22",+        "name": "PACK",+        "type": "power_in",+        "description": "PACK positive terminal and alternative power source."+      },+      {+        "number": "23",+        "name": "PMS",+        "type": "input",+        "description": "0-V charge configuration select pin; CHG terminal ON/OFF is determined by this pin."+      },+      {+        "number": "24",+        "name": "OD",+        "type": "tri_state",+        "description": "NCH FET open drain output."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 8,+        "cost_usd": 0.1336,+        "at": "2026-10-01T15:27:30"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/bq29312.pdf",+        "pages": 39,+        "sha256": "d4d1510be5e6af00",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 24,+        "described": 24,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file