← Commit history
bq25895rtwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+92−12
package.json+50−10@@ -63,7 +63,7 @@ }, { "number": "3",- "name": "D\u2013",+ "name": "D–", "type": "bidirectional", "description": "Negative USB data line for charging port detection including DCD, BC1.2, and MaxCharge handshake." },@@ -77,19 +77,19 @@ "number": "5", "name": "SCL", "type": "input",- "description": "I2C serial clock input with 400 kHz fast mode support via 10k\u03a9 pull-up resistor."+ "description": "I2C serial clock input with 400 kHz fast mode support via 10kΩ pull-up resistor." }, { "number": "6", "name": "SDA", "type": "bidirectional",- "description": "I2C serial data line with 400 kHz fast mode support via 10k\u03a9 pull-up resistor."+ "description": "I2C serial data line with 400 kHz fast mode support via 10kΩ pull-up resistor." }, { "number": "7", "name": "INT", "type": "output",- "description": "Open-drain interrupt output delivering 256\u00b5s active-low pulses on device status or fault events."+ "description": "Open-drain interrupt output delivering 256µs active-low pulses on device status or fault events." }, { "number": "8",@@ -125,19 +125,19 @@ "number": "13", "name": "BAT", "type": "power_in",- "description": "Battery positive terminal connection with internal BATFET to SYS, requires 10\u00b5F ceramic capacitor."+ "description": "Battery positive terminal connection with internal BATFET to SYS, requires 10µF ceramic capacitor." }, { "number": "14", "name": "BAT", "type": "power_in",- "description": "Battery positive terminal connection (second pad) with internal BATFET, requires 10\u00b5F capacitor."+ "description": "Battery positive terminal connection (second pad) with internal BATFET, requires 10µF capacitor." }, { "number": "15", "name": "SYS", "type": "power_out",- "description": "System power output regulated to 3.0V-3.7V minimum via BATFET, requires 20\u00b5F ceramic capacitor."+ "description": "System power output regulated to 3.0V-3.7V minimum via BATFET, requires 20µF ceramic capacitor." }, { "number": "16",@@ -179,7 +179,7 @@ "number": "22", "name": "REGN", "type": "power_out",- "description": "LDO regulator output 5V-6V supplying PWM gate drives and TS bias rail, requires 4.7\u00b5F/10V capacitor."+ "description": "LDO regulator output 5V-6V supplying PWM gate drives and TS bias rail, requires 4.7µF/10V capacitor." }, { "number": "23",@@ -235,6 +235,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "bq25895rtwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "bq25895rtwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "168cc4155adfadf90e6e08aafb4c787ffd611c87c8012bf75066bac19a2a1dbb",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -220,7 +220,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "bq25895rtwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "bq25895rtwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "168cc4155adfadf90e6e08aafb4c787ffd611c87c8012bf75066bac19a2a1dbb",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -268,4 +308,4 @@ "public": true }, "updated_at": "2026-09-24T18:03:25.828Z"-}+}