component
BQ25895RTWR
Public Made by Adomby adom
Texas Instruments Battery Management, QFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+12−9@@ -48,7 +48,7 @@ }, { "number": "3",- "name": "D\u2013",+ "name": "D–", "type": "bidirectional", "description": "Negative USB data line for charging port detection including DCD, BC1.2, and MaxCharge handshake." },@@ -62,19 +62,19 @@ "number": "5", "name": "SCL", "type": "input",- "description": "I2C serial clock input with 400 kHz fast mode support via 10k\u03a9 pull-up resistor."+ "description": "I2C serial clock input with 400 kHz fast mode support via 10kΩ pull-up resistor." }, { "number": "6", "name": "SDA", "type": "bidirectional",- "description": "I2C serial data line with 400 kHz fast mode support via 10k\u03a9 pull-up resistor."+ "description": "I2C serial data line with 400 kHz fast mode support via 10kΩ pull-up resistor." }, { "number": "7", "name": "INT", "type": "output",- "description": "Open-drain interrupt output delivering 256\u00b5s active-low pulses on device status or fault events."+ "description": "Open-drain interrupt output delivering 256µs active-low pulses on device status or fault events." }, { "number": "8",@@ -110,19 +110,19 @@ "number": "13", "name": "BAT", "type": "power_in",- "description": "Battery positive terminal connection with internal BATFET to SYS, requires 10\u00b5F ceramic capacitor."+ "description": "Battery positive terminal connection with internal BATFET to SYS, requires 10µF ceramic capacitor." }, { "number": "14", "name": "BAT", "type": "power_in",- "description": "Battery positive terminal connection (second pad) with internal BATFET, requires 10\u00b5F capacitor."+ "description": "Battery positive terminal connection (second pad) with internal BATFET, requires 10µF capacitor." }, { "number": "15", "name": "SYS", "type": "power_out",- "description": "System power output regulated to 3.0V-3.7V minimum via BATFET, requires 20\u00b5F ceramic capacitor."+ "description": "System power output regulated to 3.0V-3.7V minimum via BATFET, requires 20µF ceramic capacitor." }, { "number": "16",@@ -164,7 +164,7 @@ "number": "22", "name": "REGN", "type": "power_out",- "description": "LDO regulator output 5V-6V supplying PWM gate drives and TS bias rail, requires 4.7\u00b5F/10V capacitor."+ "description": "LDO regulator output 5V-6V supplying PWM gate drives and TS bias rail, requires 4.7µF/10V capacitor." }, { "number": "23",@@ -263,5 +263,8 @@ "docs/bq25895rtwr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }