component
BQ25895MRTWR
Public Made by Adomby adom
Texas Instruments Battery Management, WQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
bq25895mrtwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+95−15
package.json+53−13@@ -74,13 +74,13 @@ "number": "2", "name": "D+", "type": "bidirectional",- "description": "USB positive data line; BC1.2 detection and MaxCharge\u2122 adapter identification."+ "description": "USB positive data line; BC1.2 detection and MaxCharge™ adapter identification." }, { "number": "3",- "name": "D\u2013",+ "name": "D–", "type": "bidirectional",- "description": "USB negative data line; BC1.2 detection and MaxCharge\u2122 adapter identification."+ "description": "USB negative data line; BC1.2 detection and MaxCharge™ adapter identification." }, { "number": "4",@@ -92,19 +92,19 @@ "number": "5", "name": "SCL", "type": "input",- "description": "I2C clock input with required 10 k\u03a9 pull-up resistor."+ "description": "I2C clock input with required 10 kΩ pull-up resistor." }, { "number": "6", "name": "SDA", "type": "bidirectional",- "description": "I2C data input/output with required 10 k\u03a9 pull-up resistor."+ "description": "I2C data input/output with required 10 kΩ pull-up resistor." }, { "number": "7", "name": "INT", "type": "output",- "description": "Open-drain interrupt output; 256 \u00b5s active-low pulse on status/fault event."+ "description": "Open-drain interrupt output; 256 µs active-low pulse on status/fault event." }, { "number": "8",@@ -176,13 +176,13 @@ "number": "19", "name": "SW", "type": "passive",- "description": "Switching node connecting HSFET source and LSFET drain; 0.047 \u00b5F bootstrap capacitor to BTST required."+ "description": "Switching node connecting HSFET source and LSFET drain; 0.047 µF bootstrap capacitor to BTST required." }, { "number": "20", "name": "SW", "type": "passive",- "description": "Switching node connecting HSFET source and LSFET drain; 0.047 \u00b5F bootstrap capacitor to BTST required."+ "description": "Switching node connecting HSFET source and LSFET drain; 0.047 µF bootstrap capacitor to BTST required." }, { "number": "21",@@ -194,19 +194,19 @@ "number": "22", "name": "REGN", "type": "power_out",- "description": "Gate driver supply output; requires 4.7 \u00b5F ceramic capacitor to ground."+ "description": "Gate driver supply output; requires 4.7 µF ceramic capacitor to ground." }, { "number": "23", "name": "PMID", "type": "power_out",- "description": "Boost mode output (5V default) supplying external load at up to 3.1A; requires 40-60 \u00b5F to ground."+ "description": "Boost mode output (5V default) supplying external load at up to 3.1A; requires 40-60 µF to ground." }, { "number": "24", "name": "DSEL", "type": "output",- "description": "Open-drain D+/D- detection control; low during detection and for MaxCharge\u2122 adapter."+ "description": "Open-drain D+/D- detection control; low during detection and for MaxCharge™ adapter." }, { "number": "25",@@ -249,6 +249,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "bq25895mrtwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "bq25895mrtwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "6d5a4ad1efed1e224139f99edfda7e5601a6b0874813c5ec1eac1c0461777841",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -234,7 +234,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "bq25895mrtwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "bq25895mrtwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "6d5a4ad1efed1e224139f99edfda7e5601a6b0874813c5ec1eac1c0461777841",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -281,4 +321,4 @@ "visibility": { "public": true }-}+}