BQ25892RTWR

@@ -77,19 +77,19 @@         "number": "5",         "name": "SCL",         "type": "input",-        "description": "I2C interface clock input requiring 10k\u03a9 pull-up to logic rail for serial communication at 100kHz to 400kHz."+        "description": "I2C interface clock input requiring 10kΩ pull-up to logic rail for serial communication at 100kHz to 400kHz."       },       {         "number": "6",         "name": "SDA",         "type": "bidirectional",-        "description": "I2C interface bidirectional data line requiring 10k\u03a9 pull-up to logic rail supporting standard and fast mode I2C protocols."+        "description": "I2C interface bidirectional data line requiring 10kΩ pull-up to logic rail supporting standard and fast mode I2C protocols."       },       {         "number": "7",         "name": "INT",         "type": "output",-        "description": "Open-drain interrupt output pulsing low for 256\u00b5s to notify host of charger device status changes or fault events."+        "description": "Open-drain interrupt output pulsing low for 256µs to notify host of charger device status changes or fault events."       },       {         "number": "8",@@ -113,25 +113,25 @@         "number": "11",         "name": "TS",         "type": "input",-        "description": "Analog temperature sense input accepting negative temperature coefficient thermistor (103AT recommended) for JEITA-compliant charging monitoring 0\u00b0C to 60\u00b0C."+        "description": "Analog temperature sense input accepting negative temperature coefficient thermistor (103AT recommended) for JEITA-compliant charging monitoring 0°C to 60°C."       },       {         "number": "12",         "name": "QON",         "type": "input",-        "description": "Digital input with 200k\u03a9 internal pull-up enabling BATFET when low for \u22651.25s to exit shipping mode or \u226512s to trigger full system reset."+        "description": "Digital input with 200kΩ internal pull-up enabling BATFET when low for ≥1.25s to exit shipping mode or ≥12s to trigger full system reset."       },       {         "number": "13",         "name": "BAT",         "type": "power_in",-        "description": "Battery positive terminal connection point for single-cell Li-Ion or Li-polymer battery up to 4.608V with integrated BATFET providing 11m\u03a9 on-resistance."+        "description": "Battery positive terminal connection point for single-cell Li-Ion or Li-polymer battery up to 4.608V with integrated BATFET providing 11mΩ on-resistance."       },       {         "number": "14",         "name": "BAT",         "type": "power_in",-        "description": "Battery positive terminal connection point for single-cell Li-Ion or Li-polymer battery up to 4.608V with integrated BATFET providing 11m\u03a9 on-resistance."+        "description": "Battery positive terminal connection point for single-cell Li-Ion or Li-polymer battery up to 4.608V with integrated BATFET providing 11mΩ on-resistance."       },       {         "number": "15",@@ -179,13 +179,13 @@         "number": "22",         "name": "REGN",         "type": "power_out",-        "description": "PWM low-side driver supply output and TS pin bias rail regulated at 4.7V to 6.4V with 50mA current limit, requiring 4.7\u00b5F output capacitor to ground."+        "description": "PWM low-side driver supply output and TS pin bias rail regulated at 4.7V to 6.4V with 50mA current limit, requiring 4.7µF output capacitor to ground."       },       {         "number": "23",         "name": "PMID",         "type": "output",-        "description": "Intermediate power node output connected to reverse-blocking MOSFET (RBFET) drain and high-side MOSFET (HSFET) drain requiring 1\u00b5F capacitor to PGND."+        "description": "Intermediate power node output connected to reverse-blocking MOSFET (RBFET) drain and high-side MOSFET (HSFET) drain requiring 1µF capacitor to PGND."       },       {         "number": "24",@@ -234,6 +234,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "bq25892rtwr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.0,+          4.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "bq25892rtwr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.0,+          4.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "47a10578c26a60911899c6c0acc7dd4c864dedf55e3253d073538de4899e5abe",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}