BQ24232RGTR

@@ -53,37 +53,37 @@         "number": "1",         "name": "TS",         "type": "input",-        "description": "External NTC thermistor input for battery pack temperature monitoring with 10 k\u03a9 typical thermistor."+        "description": "External NTC thermistor input for battery pack temperature monitoring with 10 kΩ typical thermistor."       },       {         "number": "2",         "name": "BAT",         "type": "bidirectional",-        "description": "Charger power stage output and battery voltage sense input, bypass to VSS with 4.7-47 \u00b5F ceramic capacitor."+        "description": "Charger power stage output and battery voltage sense input, bypass to VSS with 4.7-47 µF ceramic capacitor."       },       {         "number": "3",         "name": "BAT",         "type": "bidirectional",-        "description": "Charger power stage output and battery voltage sense input, bypass to VSS with 4.7-47 \u00b5F ceramic capacitor."+        "description": "Charger power stage output and battery voltage sense input, bypass to VSS with 4.7-47 µF ceramic capacitor."       },       {         "number": "4",         "name": "CE",         "type": "input",-        "description": "Charge enable active-low input; low enables charging, high disables charging, internally pulled down ~285 k\u03a9."+        "description": "Charge enable active-low input; low enables charging, high disables charging, internally pulled down ~285 kΩ."       },       {         "number": "5",         "name": "EN2",         "type": "input",-        "description": "Input current limit configuration input; with EN1 selects input current mode per Table 1, internally pulled down ~285 k\u03a9."+        "description": "Input current limit configuration input; with EN1 selects input current mode per Table 1, internally pulled down ~285 kΩ."       },       {         "number": "6",         "name": "EN1",         "type": "input",-        "description": "Input current limit configuration input; with EN2 selects input current mode per Table 1, internally pulled down ~285 k\u03a9."+        "description": "Input current limit configuration input; with EN2 selects input current mode per Table 1, internally pulled down ~285 kΩ."       },       {         "number": "7",@@ -107,43 +107,43 @@         "number": "10",         "name": "OUT",         "type": "power_out",-        "description": "System supply output providing regulated 4.4 V when input valid, bypass to VSS with 4.7-47 \u00b5F ceramic capacitor."+        "description": "System supply output providing regulated 4.4 V when input valid, bypass to VSS with 4.7-47 µF ceramic capacitor."       },       {         "number": "11",         "name": "OUT",         "type": "power_out",-        "description": "System supply output providing regulated 4.4 V when input valid, bypass to VSS with 4.7-47 \u00b5F ceramic capacitor."+        "description": "System supply output providing regulated 4.4 V when input valid, bypass to VSS with 4.7-47 µF ceramic capacitor."       },       {         "number": "12",         "name": "ILIM",         "type": "input",-        "description": "Adjustable input current limit programming input using 3.1-7.8 k\u03a9 resistor to VSS to set maximum input current when EN2=1, EN1=0."+        "description": "Adjustable input current limit programming input using 3.1-7.8 kΩ resistor to VSS to set maximum input current when EN2=1, EN1=0."       },       {         "number": "13",         "name": "IN",         "type": "power_in",-        "description": "Input power connection for external DC supply with operating range 4.35-10.2 V for bq24232, bypass with 1-10 \u00b5F capacitor to VSS."+        "description": "Input power connection for external DC supply with operating range 4.35-10.2 V for bq24232, bypass with 1-10 µF capacitor to VSS."       },       {         "number": "14",         "name": "TMR",         "type": "input",-        "description": "Timer programming input; 18-72 k\u03a9 resistor to VSS sets precharge and fast-charge safety timer duration, unconnected defaults to 30-minute precharge and 5-hour fast-charge."+        "description": "Timer programming input; 18-72 kΩ resistor to VSS sets precharge and fast-charge safety timer duration, unconnected defaults to 30-minute precharge and 5-hour fast-charge."       },       {         "number": "15",         "name": "ITERM",         "type": "input",-        "description": "Termination current programming input (bq24232); 0-15 k\u03a9 resistor to VSS sets termination current as 0-50% of fast-charge current, unconnected selects 10% threshold."+        "description": "Termination current programming input (bq24232); 0-15 kΩ resistor to VSS sets termination current as 0-50% of fast-charge current, unconnected selects 10% threshold."       },       {         "number": "16",         "name": "ISET",         "type": "bidirectional",-        "description": "Fast-charge current programming input using 1.8-36 k\u03a9 resistor to VSS to set charge current 25-500 mA, voltage at ISET reflects actual charge current for monitoring."+        "description": "Fast-charge current programming input using 1.8-36 kΩ resistor to VSS to set charge current 25-500 mA, voltage at ISET reflects actual charge current for monitoring."       },       {         "number": "17",@@ -186,6 +186,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "bq24232rgtr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "bq24232rgtr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "8057da1d0e4bb8f614982d6299af436f58f574a879a2f3d96627a6df88471778",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}