component
BQ24232RGTR
Public Made by Adomby adom
Texas Instruments Battery Management, VQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+17−14@@ -38,37 +38,37 @@ "number": "1", "name": "TS", "type": "input",- "description": "External NTC thermistor input for battery pack temperature monitoring with 10 k\u03a9 typical thermistor."+ "description": "External NTC thermistor input for battery pack temperature monitoring with 10 kΩ typical thermistor." }, { "number": "2", "name": "BAT", "type": "bidirectional",- "description": "Charger power stage output and battery voltage sense input, bypass to VSS with 4.7-47 \u00b5F ceramic capacitor."+ "description": "Charger power stage output and battery voltage sense input, bypass to VSS with 4.7-47 µF ceramic capacitor." }, { "number": "3", "name": "BAT", "type": "bidirectional",- "description": "Charger power stage output and battery voltage sense input, bypass to VSS with 4.7-47 \u00b5F ceramic capacitor."+ "description": "Charger power stage output and battery voltage sense input, bypass to VSS with 4.7-47 µF ceramic capacitor." }, { "number": "4", "name": "CE", "type": "input",- "description": "Charge enable active-low input; low enables charging, high disables charging, internally pulled down ~285 k\u03a9."+ "description": "Charge enable active-low input; low enables charging, high disables charging, internally pulled down ~285 kΩ." }, { "number": "5", "name": "EN2", "type": "input",- "description": "Input current limit configuration input; with EN1 selects input current mode per Table 1, internally pulled down ~285 k\u03a9."+ "description": "Input current limit configuration input; with EN1 selects input current mode per Table 1, internally pulled down ~285 kΩ." }, { "number": "6", "name": "EN1", "type": "input",- "description": "Input current limit configuration input; with EN2 selects input current mode per Table 1, internally pulled down ~285 k\u03a9."+ "description": "Input current limit configuration input; with EN2 selects input current mode per Table 1, internally pulled down ~285 kΩ." }, { "number": "7",@@ -92,43 +92,43 @@ "number": "10", "name": "OUT", "type": "power_out",- "description": "System supply output providing regulated 4.4 V when input valid, bypass to VSS with 4.7-47 \u00b5F ceramic capacitor."+ "description": "System supply output providing regulated 4.4 V when input valid, bypass to VSS with 4.7-47 µF ceramic capacitor." }, { "number": "11", "name": "OUT", "type": "power_out",- "description": "System supply output providing regulated 4.4 V when input valid, bypass to VSS with 4.7-47 \u00b5F ceramic capacitor."+ "description": "System supply output providing regulated 4.4 V when input valid, bypass to VSS with 4.7-47 µF ceramic capacitor." }, { "number": "12", "name": "ILIM", "type": "input",- "description": "Adjustable input current limit programming input using 3.1-7.8 k\u03a9 resistor to VSS to set maximum input current when EN2=1, EN1=0."+ "description": "Adjustable input current limit programming input using 3.1-7.8 kΩ resistor to VSS to set maximum input current when EN2=1, EN1=0." }, { "number": "13", "name": "IN", "type": "power_in",- "description": "Input power connection for external DC supply with operating range 4.35-10.2 V for bq24232, bypass with 1-10 \u00b5F capacitor to VSS."+ "description": "Input power connection for external DC supply with operating range 4.35-10.2 V for bq24232, bypass with 1-10 µF capacitor to VSS." }, { "number": "14", "name": "TMR", "type": "input",- "description": "Timer programming input; 18-72 k\u03a9 resistor to VSS sets precharge and fast-charge safety timer duration, unconnected defaults to 30-minute precharge and 5-hour fast-charge."+ "description": "Timer programming input; 18-72 kΩ resistor to VSS sets precharge and fast-charge safety timer duration, unconnected defaults to 30-minute precharge and 5-hour fast-charge." }, { "number": "15", "name": "ITERM", "type": "input",- "description": "Termination current programming input (bq24232); 0-15 k\u03a9 resistor to VSS sets termination current as 0-50% of fast-charge current, unconnected selects 10% threshold."+ "description": "Termination current programming input (bq24232); 0-15 kΩ resistor to VSS sets termination current as 0-50% of fast-charge current, unconnected selects 10% threshold." }, { "number": "16", "name": "ISET", "type": "bidirectional",- "description": "Fast-charge current programming input using 1.8-36 k\u03a9 resistor to VSS to set charge current 25-500 mA, voltage at ISET reflects actual charge current for monitoring."+ "description": "Fast-charge current programming input using 1.8-36 kΩ resistor to VSS to set charge current 25-500 mA, voltage at ISET reflects actual charge current for monitoring." }, { "number": "17",@@ -214,5 +214,8 @@ "docs/bq24232rgtr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }