component
BQ24095DGQT
Public Made by Adomby adom
Texas Instruments Battery Management, HVSSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+48@@ -0,0 +1,48 @@+# BQ24095DGQT++**Texas Instruments** · Battery Management · HVSSOP-10++BQ24095DGQT from Texas Instruments, in a HVSSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN | power_in | Input power from an AC adapter or USB port; absolute maximum is 12 V with respect to VSS, and a 1 µF to 10 µF bypass capacitor is expected from IN to VSS. |+| 2 | ISET | input | Fast-charge current program pin; an external resistor from ISET to VSS sets the charge current, with a range of 10.8 kΩ (50 mA) to 540 Ω (1000 mA). |+| 3 | VSS | power_in | Ground terminal; it must be connected to ground at all times. |+| 4 | PRE-TERM | input | Programs the current termination threshold (5% to 50% of the ISET-set charge current) and sets the precharge current to twice the termination level, using a programming resistor of 1 kΩ to 10 kΩ. |+| 5 | PG | output | Open-drain power-good output; low (FET on) indicates the input voltage is above UVLO and above the OUT (battery) voltage. |+| 6 | NC | unconnected | Not connected for internal use; do not make a connection to this pin and do not route signals through it. |+| 7 | ISET2 | input | Selects the USB or adapter input current limit: high sets 500 mA max, low sets the limit to ISET, and float sets 100 mA max. |+| 8 | CHG | output | Open-drain charge-status output; low (FET on) indicates charging and open drain indicates no charging or charge complete, with a sink current rating of 15 mA maximum. |+| 9 | TS | input | Battery NTC temperature-sense input (10 kΩ NTC at 25°C for the BQ24095); floating or pulling high enters TTDM mode and disables TS monitoring, timers and termination, while pulling low disables the IC. |+| 10 | OUT | power_out | Battery connection and charger output, with a 1 A recommended operating current and 1.25 A absolute maximum continuous output current, and a 1 µF to 10 µF bypass capacitor expected. |+| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HVSSOP-10 |+| Category | Power Management (PMIC) |+| Pins | 11 |++## CAD (KiCad official)++- Symbol: `BQ24095DGQT`+- Footprint: `Package_SO:HVSSOP-10-1EP_3x3mm_P0.5mm_EP1.83x1.89mm`+- 3D model: HVSSOP-10, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm nominal HVSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)+- 3D model files: `bq24095dgqt-etched.step` / `bq24095dgqt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `bq24095dgqt.step` / `bq24095dgqt.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/bq24091) (44 pp, sha256 `be833c849d71d54e`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/bq24095dgqt-datasheet.pdf)
page.jsonadded+219@@ -0,0 +1,219 @@+{+ "slug": "bq24095dgqt",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Battery Management, HVSSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "bq24095dgqt",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "bq24095dgqt.kicad_sym",+ "bq24095dgqt.kicad_mod",+ "bq24095dgqt.glb",+ "bq24095dgqt.step",+ "bq24095dgqt.lbr",+ "docs/hero.png",+ "docs/bq24095dgqt-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "bq24095dgqt-hero.glb",+ "bq24095dgqt-hero.overlay.json"+ ],+ "component": {+ "mpn": "BQ24095DGQT",+ "manufacturer": "Texas Instruments",+ "package": "HVSSOP-10",+ "pin_count": 11,+ "category": "Power Management (PMIC)",+ "subcategory": "Battery Management",+ "datasheet": "https://www.ti.com/cn/lit/gpn/bq24091",+ "parts": {+ "symbol": "bq24095dgqt.kicad_sym",+ "footprint": "bq24095dgqt.kicad_mod",+ "model_3d": "bq24095dgqt-hero.glb",+ "model_3d_plain": "bq24095dgqt.glb",+ "model_3d_step": "bq24095dgqt-etched.step",+ "model_3d_step_plain": "bq24095dgqt.step",+ "lbr": "bq24095dgqt.lbr"+ },+ "distributor_links": {+ "lcsc": "C2866159",+ "digikey": "296-BQ24095DGQTTR-ND",+ "mouser": "595-BQ24095DGQT"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T16:37:11Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-BQ24095DGQTTR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-BQ24095DGQT",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "IN",+ "type": "power_in",+ "description": "Input power from an AC adapter or USB port; absolute maximum is 12 V with respect to VSS, and a 1 µF to 10 µF bypass capacitor is expected from IN to VSS."+ },+ {+ "number": "2",+ "name": "ISET",+ "type": "input",+ "description": "Fast-charge current program pin; an external resistor from ISET to VSS sets the charge current, with a range of 10.8 kΩ (50 mA) to 540 Ω (1000 mA)."+ },+ {+ "number": "3",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground terminal; it must be connected to ground at all times."+ },+ {+ "number": "4",+ "name": "PRE-TERM",+ "type": "input",+ "description": "Programs the current termination threshold (5% to 50% of the ISET-set charge current) and sets the precharge current to twice the termination level, using a programming resistor of 1 kΩ to 10 kΩ."+ },+ {+ "number": "5",+ "name": "PG",+ "type": "output",+ "description": "Open-drain power-good output; low (FET on) indicates the input voltage is above UVLO and above the OUT (battery) voltage."+ },+ {+ "number": "6",+ "name": "NC",+ "type": "unconnected",+ "description": "Not connected for internal use; do not make a connection to this pin and do not route signals through it."+ },+ {+ "number": "7",+ "name": "ISET2",+ "type": "input",+ "description": "Selects the USB or adapter input current limit: high sets 500 mA max, low sets the limit to ISET, and float sets 100 mA max."+ },+ {+ "number": "8",+ "name": "CHG",+ "type": "output",+ "description": "Open-drain charge-status output; low (FET on) indicates charging and open drain indicates no charging or charge complete, with a sink current rating of 15 mA maximum."+ },+ {+ "number": "9",+ "name": "TS",+ "type": "input",+ "description": "Battery NTC temperature-sense input (10 kΩ NTC at 25°C for the BQ24095); floating or pulling high enters TTDM mode and disables TS monitoring, timers and termination, while pulling low disables the IC."+ },+ {+ "number": "10",+ "name": "OUT",+ "type": "power_out",+ "description": "Battery connection and charger output, with a 1 A recommended operating current and 1.25 A absolute maximum continuous output current, and a 1 µF to 10 µF bypass capacitor expected."+ },+ {+ "number": "11",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The exposed thermal pad is not a numbered pin. It is internally connected to VSS and must be tied to; The datasheet is a Chinese translation with English tables. The pinout was taken from the English-na; Pin types were mapped to KiCad ERC classes: IN, VSS and OUT are power pins, and the datasheet lists ",+ "exposed pad 11 added from the footprint"+ ],+ "pages_sent": 11,+ "cost_usd": 0.0789,+ "at": "2026-10-08T16:36:47"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/bq24091",+ "pages": 44,+ "sha256": "be833c849d71d54e",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 11,+ "described": 11,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "bq24095dgqt.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.91,+ 3,+ 1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "bfc6c6f1e9070017fab7a75212555829719a1e5f138eb1cc9ec1c6960c1c4125",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "bq24095dgqt-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.91,+ 3,+ 1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "37b0964f2ceead4acae9e92237fb93efe70d4aceb9ecccb0ae4bcd9c57df6a48",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}